10 More Discussions You Might Find Interesting
1. IP Networking
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
2. Solaris
Hi All,
I have an Oracle M4000 server with Solaris 10 OS. I have access to Solaris root prompt.
But I don't know the XSCF IP of this server.
Is there any way to display XSCF IP from Solaris OS? (2 Replies)
Discussion started by: byrusber
2 Replies
3. Solaris
Hi all,
I understand SP is a separate processor use for management purposes.
I understand XSCF is the management facility (similar to IDRAC, ILOM etc).
I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it.
I am able to use... (4 Replies)
Discussion started by: javanoob
4 Replies
4. Solaris
Hi
We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g.
As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Discussion started by: gregsih
6 Replies
5. Emergency UNIX and Linux Support
Hi All,
I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me
-> show /SP/users/root
/SP/users/root
Targets:
ssh
Properties:
role... (1 Reply)
Discussion started by: solaris_1977
1 Replies
6. Emergency UNIX and Linux Support
we have a SUN M3000 server.
setup as only 1 domain.
disk c0t0d0 and c0t1d0 and setup as SVM mirrors.
a few days ago disk T1 failed.
new we have replaced the disk, but can's see the disk in format.
have done cfgadm and devfsadm.
still can't access the new disk in format.
the output... (6 Replies)
Discussion started by: robsonde
6 Replies
7. Solaris
Hi,
We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions.
RJS (4 Replies)
Discussion started by: rajasekg
4 Replies
8. Solaris
Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help... (1 Reply)
Discussion started by: incredible
1 Replies
9. Solaris
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Discussion started by: fugitive
5 Replies
10. Solaris
is there a way to force an error on an xscf much the same way you can with logger on solaris 10? i would like to test and make sure setarchiving is appropriately configured. however, i do not want to just pull a power source as the system is in production. anyway have any insight? showarchiving... (0 Replies)
Discussion started by: pupp
0 Replies
Graphics::Primitive::Component(3pm) User Contributed Perl Documentation Graphics::Primitive::Component(3pm)
NAME
Graphics::Primitive::Component - Base graphical unit
DESCRIPTION
A Component is an entity with a graphical representation.
SYNOPSIS
my $c = Graphics::Primitive::Component->new({
origin => Geometry::Primitive::Point->new({
x => $x, y => $y
}),
width => 500, height => 350
});
LIFECYCLE
prepare
Most components do the majority of their setup in the prepare. The goal of prepare is to establish it's minimum height and width so
that it can be properly positioned by a layout manager.
$driver->prepare($comp);
layout
This is not a method of Component, but a phase introduced by the use of Layout::Manager. If the component is a container then each of
it's child components (even the containers) will be positioned according to the minimum height and width determined during prepare.
Different layout manager implementations have different rules, so consult the documentation for each for details. After this phase has
completed the origin, height and width should be set for all components.
$lm->do_layout($comp);
finalize
This final phase provides and opportunity for the component to do any final changes to it's internals before being passed to a driver
for drawing. An example might be a component that draws a fleuron at it's extremities. Since the final height and width isn't known
until this phase, it was impossible for it to position these internal components until now. It may even defer creation of this
components until now.
It is not ok to defer all action to the finalize phase. If you do not establish a minimum hieght and width during prepare then the
layout manager may not provide you with enough space to draw.
$driver->finalize($comp);
draw
Handled by Graphics::Primitive::Driver.
$driver->draw($comp);
METHODS
Constructor
new Creates a new Component.
Instance Methods
background_color
Set this component's background color.
border
Set this component's border, which should be an instance of Border.
callback
Optional callback that is fired at the beginning of the "finalize" phase. This allows you to add some sort of custom code that can
modify the component just before it is rendered. The only argument is the component itself.
Note that changing the position or the dimensions of the component will not re-layout the scene. You may have weird results of you
manipulate the component's dimensions here.
class
Set/Get this component's class, which is an abitrary string. Graphics::Primitive has no internal use for this attribute but provides
it for outside use.
color
Set this component's foreground color.
fire_callback
Method to execute this component's "callback".
get_tree
Get a tree for this component. Since components are -- by definiton -- leaf nodes, this tree will only have the one member at it's
root.
has_callback
Predicate that tells if this component has a "callback".
height
Set this component's height.
inside_bounding_box
Returns a Rectangle that defines the edges of the 'inside' box for this component. This box is relative to the origin of the
component.
inside_height
Get the height available in this container after taking away space for padding, margin and borders.
inside_width
Get the width available in this container after taking away space for padding, margin and borders.
margins
Set this component's margins, which should be an instance of Insets. Margins are the space outside the component's bounding box, as in
CSS. The margins should be outside the border.
maximum_height
Set/Get this component's maximum height. Used to inform a layout manager.
maximum_width
Set/Get this component's maximum width. Used to inform a layout manager.
minimum_height
Set/Get this component's minimum height. Used to inform a layout manager.
minimum_inside_height
Get the minimum height available in this container after taking away space for padding, margin and borders.
minimum_inside_width
Get the minimum width available in this container after taking away space for padding, margin and borders.
minimum_width
Set/Get this component's minimum width. Used to inform a layout manager.
name
Set this component's name. This is not required, but may inform consumers of a component. Pay attention to that library's
documentation.
origin
Set/Get the origin point for this component.
outside_height
Get the height consumed by padding, margin and borders.
outside_width
Get the width consumed by padding, margin and borders.
finalize
Method provided to give component one last opportunity to put it's contents into the provided space. Called after prepare.
padding
Set this component's padding, which should be an instance of Insets. Padding is the space inside the component's bounding box, as in
CSS. This padding should be between the border and the component's content.
page
If true then this component represents stand-alone page. This informs the driver that this component (and any children) are to be
renderered on a single surface. This only really makes sense in formats that have pages such as PDF of PostScript.
prepare
Method to prepare this component for drawing. This is an empty sub and is meant to be overridden by a specific implementation.
preferred_height
Set/Get this component's preferred height. Used to inform a layout manager.
preferred_width
Set/Get this component's preferred width. Used to inform a layout manager.
to_string
Get a string representation of this component in the form of:
$name $x,$y ($widthx$height)
visible
Set/Get this component's visible flag.
width
Set/Get this component's width.
AUTHOR
Cory Watson, "<gphat@cpan.org>"
BUGS
Please report any bugs or feature requests to "bug-geometry-primitive at rt.cpan.org", or through the web interface at
http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive>. I
will be notified, and then you'll automatically be notified of progress on your bug as I make changes.
COPYRIGHT & LICENSE
Copyright 2008-2009 by Cory G Watson.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.12.3 2011-06-02 Graphics::Primitive::Component(3pm)