We have an application which runs on Windows 2000 that responds to prrint requests by anyone using RFC1179 protocol
on port 515.
We are getting an error message when submitting print requests
from Sun Solaris 9.
"Windows 2000 LPD Server Error: Specified printer does not exist"
The printer was set up using the lpsystem -t bsd remotehost
command, followed by lpadmin -p printername remotehost
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Hello friends,
i have a perl script as below ...
for (0 ..$#values)
{
##want to print some message here in Report.txt file
print `find /abc/xyz/pqr/$values" -type f -ls` >> Report.txt
}
I am able to get output of print `find /abc/xyz/pqr/$values" -type f -ls` >> Report.txt
in... (2 Replies)
We are using Red Hat. We have a issue like this: We want to print from Linux, to a printer attached to a Windows machine. What we want to print is a PDF. It prints, but the printing starts from the middle of the page. In the report, there is no space at the top but still printing starts from the... (5 Replies)
Dear all,
I use perror in order to print an error message to the standar error. For example
if a C program is called without its two necessary command line parameters
then :
if (argc != 3)
{
perror("use: ./myProgram <source file> <target file>\n");
return 1;
}
Now the... (2 Replies)
AUSCOPE(1) General Commands Manual AUSCOPE(1)NAME
auscope - Network Audio System Protocol Filter
SYNOPSIS
auscope [ option ] ...
DESCRIPTION
auscope is an audio protocol filter that can be used to view the network packets being sent between an audio application and an audio
server.
auscope is written in Perl, so you must have Perl installed on your machine in order to run auscope. If your Perl executable is not
installed as /usr/local/bin/perl, you should modify the first line of the auscope script to reflect the Perl executable's location. Or,
you can invoke auscope as
perl auscope [ option ] ...
assuming the Perl executable is in your path.
To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop machine on which the audio
server is running and the port to use to connect to the audio server. Both the output port (server) and input port (client) are automati-
cally biased by 8000. The output port defaults to 0 and the input port defaults to 1.
ARGUMENTS
-i<input-port>
Specify the port that auscope will use to take requests from clients.
-o<output-port>
Determines the port that auscope will use to connect to the audio server.
-h<audio server name>
Determines the desktop machine name that auscope will use to find the audio server.
-v<print-level>
Determines the level of printing which auscope will provide. The print-level can be 0 or 1. The larger numbers provide greater
output detail.
EXAMPLES
In the following example, mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
host tcphost. auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001 and connect
to the audio server on port 8000.
Ports (file descriptors) on the network host are used to read and write the audio protocol. The audio client auplay will connect to the
audio server via the TCP/IP network host tcphost and port 8001:
auscope -i1 -o0 -hmcxterm
auplay -audio tcp/tcphost:8001 dial.snd
In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the audio server via the
network host tcphost, while displaying its graphical interface on another server labmcx:
auscope -i1 -o0 -hmcxterm -v1
autool -audio tcp/tcphost:8001 -display labmcx:0.0
SEE ALSO nas(1), perl(1)COPYRIGHT
Copyright 1994 Network Computing Devices, Inc.
AUTHOR
Greg Renda, Network Computing Devices, Inc.
1.9.3 AUSCOPE(1)