Diskless RedHat from a SPARC server


 
Thread Tools Search this Thread
Operating Systems Solaris Diskless RedHat from a SPARC server
# 1  
Old 04-06-2011
Diskless RedHat from a SPARC server

Hi all

having a problem getting the redhat image to actually start loding and i receive a TFTP:Access Denied error after the redhat diskless machine grabs an IP from the solaris server which has a small scope set up on it.

Here is what I did: used 2 redhat machines and rsync'd a to a directory on one of them to get a good image. Then i tar'd that image up and dumped it to the export/diskless/rh directory on my solaris machine. Made the appropriate changes in the dfstab to share that directory out. Also, pointed the kernel appropriately in /tftpboot and went ahead and made the /etc/ethers entry even though i shouldnt need it. Tried with and without ethers file with the same result.

To me, it seems like it grabs the IP, but wont do the bootparams and then load the OS like on a solaris diskless installation.

I know, the simple answer is just use a redhat server or make the diskless x86 clients solaris...but thats not feasible to management. Anyone know if there is a setting in svccfg for tftp to allow this?

thanks for the help in advance
# 2  
Old 04-07-2011
tftp is functioning, as i can tftp files from the tftpboot directory to another machine. All permissions are a least 755 on the files in /tftpboot

im not really sure what the problem is
# 3  
Old 04-13-2011
figured out the problem. dhcpmgr's boot file was pointed to /tftpboot/bootfile whereas i should have pointed it at the root directory. I figured this out because no matter what file i threw at it i would get the same result. So we created a tftpboot inside the tftpboot and sure enough it boots now.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

OVM Server for SPARC ... Need Your Help Guys !

I have two SPARC T4-2 servers: - Oracle Solaris 11.1 Installed. - Oracle VM Server for SPARC 3.0 software Installed. - Shared LUN provisioned to both servers from Clariion CX4 storage box (shared LUN to be used for the Live Migration of the VMs). - Oracle VM Agent 3.2.1 for SPARC installed. ... (14 Replies)
Discussion started by: Mack1982
14 Replies

2. UNIX for Dummies Questions & Answers

enable all operations to use a proxy server , redhat server

Hi, i would like to enable all operations/connections to use a proxy server in a redhat server , witch file should i config to get this for all conections .... Thanks (0 Replies)
Discussion started by: prpkrk
0 Replies

3. Solaris

SPARC Enterprise T5440 Server, can not power off

SPARC Enterprise T5440 Server, can not power off I connect to Service Processor via serial port and submit the following to boot the system, it boots fine but can not power off the system. Can someone help? The following takes me to unix login -> start /SYS -> start /SP/console... (6 Replies)
Discussion started by: paulk93
6 Replies

4. Hardware

sun sparc server hdd sled

does anyone know where to look for that piece of metal attached to hard drive that inserts it into server (fire v125)? I've tried ebay, with no luck. (seller requires verified paypal address which is unpossible here) (0 Replies)
Discussion started by: orange47
0 Replies

5. Solaris

Sparc 20 Server and Drum Scanner...

I am looking for a free low overhead software to do basic TIFF-16 levels and to jpeg conversion. I know very little about the Solaris OS so any pointers in what 7.0 already provides and what free software is already out there for imaging and easy ftp is appreciated. We also want to do web... (0 Replies)
Discussion started by: aleatory
0 Replies

6. UNIX for Advanced & Expert Users

PXE diskless boot fails

Hi, I am trying to setup a server for a diskless boot of a computer class (with ubuntu) I followed the guidelines in https://help.ubuntu.com/community/DisklessUbuntuHowto I have two computers: one is the server I installed and the other is my macbook on which I run a virtual machine... (8 Replies)
Discussion started by: yotamhc
8 Replies

7. Solaris

SUNWsmbau patches and diskless clients

Hello i have set up a diskless client to boot off my server, however when i try to add the service using smosservice, i get the error that SUNWsmbau (Samba service) is on a revision past what is on the installation media. What i did to get to this point: clean install on V880 with Solaris... (3 Replies)
Discussion started by: caddyjoe77
3 Replies

8. Filesystems, Disks and Memory

How To setup a Diskless Swap System.

This is a guide for setting up your computer with a fast swap system using usb memory sticks. A detailed study of the theories behind this setup can be found here. While this How-To does not include the CFLRU replacement algorithm, it does show the performance benefits of using NAND flash memory... (2 Replies)
Discussion started by: Johnny_Thumbs
2 Replies

9. UNIX for Dummies Questions & Answers

setup a DNS server for my redhat server

Using Redhat Linux Enterprise AS 4 can someone teach me how to setup a dns server for my webserver? i've registered a domainname at mydomain.com but when i type in the domain i register i cannot enter to my webserver. someone told me that it is related with the DNS setting on my server. i've... (2 Replies)
Discussion started by: kaixiang88
2 Replies

10. Solaris

sparc server 20

I am having a sparc server 20 machine. can i use normal svga monitor and normal(ps2)keyboard with it. pls any body help me out (1 Reply)
Discussion started by: ajay234
1 Replies
Login or Register to Ask a Question