Login or Register to Ask a Question and Join Our Community


Solaris

grep...? problem

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris grep...? problem
# 1  
Old 02-09-2011
grep...? problem
hi all
i have a problem with utility grep
i have this output :
Code:
Engine Busy Utilization        CPU Busy   I/O Busy       Idle                 
  ------------------------       --------   --------   --------    
    Engine 0                        0.2 %      0.7 %     99.2 %

i want to have this output :

Code:
Engine 0    0.2%    99,2%

how I can it ?
Thanks and regards
Last edited by DukeNuke2; 02-09-2011 at 06:31 AM..
# 2  
Old 02-09-2011
use
Code:
tail +3

or
Code:
tail -n +3

or
Code:
grep e\ 0

Code:
# cat mytst
Engine Busy Utilization        CPU Busy   I/O Busy       Idle
  ------------------------       --------   --------   --------
    Engine 0                        0.2 %      0.7 %     99.2 %
# grep e\ 0 mytst
    Engine 0                        0.2 %      0.7 %     99.2 %
#

or
Code:
grep e\ [0-9]

And if your file is the ouput of an SQL statement, just turn off the header of the columns before running it.
Code:
set head off

Last edited by ctsgnb; 02-09-2011 at 07:02 AM..
# 3  
Old 02-09-2011
Code:
=============================================================================== 
      Sybase Adaptive Server Enterprise System Performance Report
=============================================================================== 
 
Server Version:        Adaptive Server Enterprise/15.0.3/EBF 16549 ESD#1/P/x86_ 
Server Name:           RMS_P15                                                  
Run Date:              Feb 09, 2011                                             
Sampling Started at:   Feb 09, 2011 12:05:02                                    
Sampling Ended at:     Feb 09, 2011 12:08:02                                    
Sample Interval:       00:03:00                                                 
Sample Mode:           No Clear                                                 
Counters Last Cleared: Oct 09, 2010 13:13:20                                    
 
=============================================================================== 
 
Kernel Utilization
------------------
 
  Your Runnable Process Search Count is set to 3                                
  and I/O Polling Process Count is set to 6                                     
 
  Engine Busy Utilization        CPU Busy   I/O Busy       Idle                 
  ------------------------       --------   --------   --------    
    Engine 0                       40.1 %      6.7 %     53.2 %              
    Engine 1                        0.0 %      0.0 %    100.0 %              
    Engine 2                        0.1 %      0.0 %     99.9 %              
    Engine 3                       15.1 %      0.7 %     84.2 %              
    Engine 4                       29.9 %      0.1 %     70.0 %              
    Engine 5                       94.9 %      0.0 %      5.1 %              
    Engine 6                        9.6 %      0.3 %     90.1 %              
    Engine 7                        0.0 %      0.0 %    100.0 %              
    Engine 8                        3.5 %      0.0 %     96.5 %              
    Engine 9                       58.3 %      0.8 %     40.9 %              
    Engine 10                       8.2 %      0.7 %     91.1 %              
    Engine 11                       0.2 %      0.1 %     99.7 %              
    Engine 12                       0.9 %      0.4 %     98.7 %              
    Engine 13                      22.2 %      3.7 %     74.1 %              
    Engine 14                       2.5 %      0.1 %     97.4 %              
  ------------------------       --------   --------   --------    
  Summary           Total         285.5 %     13.4 %   1201.1 %              
                  Average          19.0 %      0.9 %     80.1 %              
 
  CPU Yields by Engine            per sec      per xact       count  % of total
  -------------------------  ------------  ------------  ----------  ---------- 
    Engine 0                        214.6           2.6       38621      14.2 %
    Engine 1                         62.0           0.7       11156       4.1 %
    Engine 2                         61.7           0.7       11107       4.1 %
    Engine 3                         80.9           1.0       14563       5.4 %
    Engine 4                        111.8           1.3       20123       7.4 %
    Engine 5                          0.0           0.0           2       0.0 %
    Engine 6                        100.3           1.2       18061       6.6 %
    Engine 7                         58.9           0.7       10593       3.9 %
    Engine 8                         95.8           1.1       17241       6.3 %
    Engine 9                         37.8           0.5        6812       2.5 %
    Engine 10                        61.9           0.7       11143       4.1 %
    Engine 11                       105.8           1.3       19042       7.0 %
    Engine 12                       123.5           1.5       22236       8.2 %
    Engine 13                       245.9           3.0       44270      16.3 %
    Engine 14                       149.1           1.8       26846       9.9 %
  -------------------------  ------------  ------------  ----------
  Total CPU Yields                 1510.1          18.1      271816             
 
  Network Checks
    Non-Blocking                  28218.6         338.7     5079352      94.9 %
    Blocking                       1510.1          18.1      271820       5.1 %
  -------------------------  ------------  ------------  ----------
  Total Network I/O Checks        29728.7         356.8     5351172             
  Avg Net I/Os per Check              n/a           n/a     2.26798       n/a

i want to have a report that the output had written in "bold"
Last edited by Scott; 02-09-2011 at 10:26 AM.. Reason: Please use code tags
# 4  
Old 02-09-2011
Code:
sed '/^Engine 0/,/^Average/!d;/^Average/q' infile

Code:
# cat mytst
===============================================================================
Sybase Adaptive Server Enterprise System Performance Report
===============================================================================

Server Version: Adaptive Server Enterprise/15.0.3/EBF 16549 ESD#1/P/x86_
Server Name: RMS_P15
Run Date: Feb 09, 2011
Sampling Started at: Feb 09, 2011 12:05:02
Sampling Ended at: Feb 09, 2011 12:08:02
Sample Interval: 00:03:00
Sample Mode: No Clear
Counters Last Cleared: Oct 09, 2010 13:13:20

===============================================================================

Kernel Utilization
------------------

Your Runnable Process Search Count is set to 3
and I/O Polling Process Count is set to 6

Engine Busy Utilization CPU Busy I/O Busy Idle
------------------------ -------- -------- --------
Engine 0 40.1 % 6.7 % 53.2 %
Engine 1 0.0 % 0.0 % 100.0 %
Engine 2 0.1 % 0.0 % 99.9 %
Engine 3 15.1 % 0.7 % 84.2 %
Engine 4 29.9 % 0.1 % 70.0 %
Engine 5 94.9 % 0.0 % 5.1 %
Engine 6 9.6 % 0.3 % 90.1 %
Engine 7 0.0 % 0.0 % 100.0 %
Engine 8 3.5 % 0.0 % 96.5 %
Engine 9 58.3 % 0.8 % 40.9 %
Engine 10 8.2 % 0.7 % 91.1 %
Engine 11 0.2 % 0.1 % 99.7 %
Engine 12 0.9 % 0.4 % 98.7 %
Engine 13 22.2 % 3.7 % 74.1 %
Engine 14 2.5 % 0.1 % 97.4 %
------------------------ -------- -------- --------
Summary Total 285.5 % 13.4 % 1201.1 %
Average 19.0 % 0.9 % 80.1 %

CPU Yields by Engine per sec per xact count % of total
------------------------- ------------ ------------ ---------- ----------
Engine 0 214.6 2.6 38621 14.2 %
Engine 1 62.0 0.7 11156 4.1 %
Engine 2 61.7 0.7 11107 4.1 %
Engine 3 80.9 1.0 14563 5.4 %
Engine 4 111.8 1.3 20123 7.4 %
Engine 5 0.0 0.0 2 0.0 %
Engine 6 100.3 1.2 18061 6.6 %
Engine 7 58.9 0.7 10593 3.9 %
Engine 8 95.8 1.1 17241 6.3 %
Engine 9 37.8 0.5 6812 2.5 %
Engine 10 61.9 0.7 11143 4.1 %
Engine 11 105.8 1.3 19042 7.0 %
Engine 12 123.5 1.5 22236 8.2 %
Engine 13 245.9 3.0 44270 16.3 %
Engine 14 149.1 1.8 26846 9.9 %
------------------------- ------------ ------------ ----------
Total CPU Yields 1510.1 18.1 271816

Network Checks
Non-Blocking 28218.6 338.7 5079352 94.9 %
Blocking 1510.1 18.1 271820 5.1 %
------------------------- ------------ ------------ ----------
Total Network I/O Checks 29728.7 356.8 5351172
Avg Net I/Os per Check n/a n/a 2.26798 n/a

Code:
# sed '/^Engine 0/,/^Average/!d;/^Average/q' mytst
Engine 0 40.1 % 6.7 % 53.2 %
Engine 1 0.0 % 0.0 % 100.0 %
Engine 2 0.1 % 0.0 % 99.9 %
Engine 3 15.1 % 0.7 % 84.2 %
Engine 4 29.9 % 0.1 % 70.0 %
Engine 5 94.9 % 0.0 % 5.1 %
Engine 6 9.6 % 0.3 % 90.1 %
Engine 7 0.0 % 0.0 % 100.0 %
Engine 8 3.5 % 0.0 % 96.5 %
Engine 9 58.3 % 0.8 % 40.9 %
Engine 10 8.2 % 0.7 % 91.1 %
Engine 11 0.2 % 0.1 % 99.7 %
Engine 12 0.9 % 0.4 % 98.7 %
Engine 13 22.2 % 3.7 % 74.1 %
Engine 14 2.5 % 0.1 % 97.4 %
------------------------ -------- -------- --------
Summary Total 285.5 % 13.4 % 1201.1 %
Average 19.0 % 0.9 % 80.1 %
#

# 5  
Old 02-09-2011
Or:

Code:
sed -n '/^Engine Busy/,/^Average/ p' abc092.txt | tail +3

# 6  
Old 02-09-2011
i done your instruction but don't show nobody output , i write on a prompt
this :
Code:
sed '/^Engine 0/,/^Average/!d;/^Average/q' pippo.out

where pippo.out it's my report file .

my o.s is : SunOS 5.10
Thanks.
Last edited by Scott; 02-09-2011 at 10:27 AM.. Reason: Code tags
# 7  
Old 02-09-2011
Remove all the ^ and make another try.

Code:
sed '/Engine 0/,/Average/!d;/Average/q' pippo.out

This should work

If it still doesn't work, please upload your pippo.out file
Last edited by ctsgnb; 02-09-2011 at 01:04 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

sed Or Grep Problem OR Terminal Problem?

I don't know if you guys get this problem sometimes at Terminal but I had been having this problem since yesterday :( Maybe I overdid the Terminal. Even the codes that used to work doesn't work anymore. Here is what 's happening: * I wanted to remove lines containing digits so I used this... (25 Replies)
Discussion started by: Nexeu
25 Replies

2. Shell Programming and Scripting

Grep problem

Hello. I'm learning shell scripting right now and I'm trying simple scripts. I have a problem with the one below. The idea is to found the number of files containing asd in their name. Here's the code: #!/bin/sh pattern=asd total=0 for f in * do && continue if grep $pattern $f >... (3 Replies)
Discussion started by: EmZvr
3 Replies

3. Shell Programming and Scripting

grep problem

Hi everyone i am facing a strange problem in grep below is the code RC=0 grep $ERROR_MASK $LOG_FILE 2>&1 > /dev/null && RC=1 || RC=0 what does the above statment do i mean it search for error mask into log file and redirect the error to console null then what's the meaning of RC=1 ||... (2 Replies)
Discussion started by: aishsimplesweet
2 Replies

4. UNIX for Dummies Questions & Answers

problem with grep

Hi I am trying to grep a string in a directory which is having 5000 files. PA>> grep -iH 'linc.unisure_pr13n' * bash: /usr/bin/grep: Arg list too long I am getting the error. i also tried PA>> ls -ltr | grep -iH 'linc.unisure_pr13n' * but still i am getting the error Please Advice... (4 Replies)
Discussion started by: subhotech
4 Replies

5. Shell Programming and Scripting

problem with grep |

Hi, When i try this it is not executing either result or total, pls can any one help me in this. max=month_134.log grep result|total $max > log.txt In month_134.log, it should contain either result or total and then send it to log.txt.It should execute result or total in log.txt ... (3 Replies)
Discussion started by: NehaKrish
3 Replies

6. Homework & Coursework Questions

Grep problem

Changed Problem its a sed actually... Use and complete the template provided. The entire template must be completed. If you don't, your post may be deleted! 1. The problem statement, all variables and given/known data: Use a sed command to create an output file from the input file. The input... (2 Replies)
Discussion started by: skalidindi
2 Replies

7. Shell Programming and Scripting

GREP problem

I have a problem. Suppose I have a log named transport.log >> tp finished with return code: 203 meaning: wrong syntax in tp call .... tp finished with return code: 0 meaning: Everything ok. << What i want to do is to get the return code of the 1st one. So I would probably do:... (2 Replies)
Discussion started by: kdyzsa
2 Replies

8. UNIX for Dummies Questions & Answers

Grep problem

Hi there, this is a very simple question. When I do grep -c "PWD" filename, I get 5. This means the filename contains 5 lines of "PWD" occurence. I tried to assign to a variable. int= grep -c "PWD" filename When I typed echo $int The output: 5 I get an empty line space. Now I... (1 Reply)
Discussion started by: felixwhoals
1 Replies

9. Shell Programming and Scripting

Grep Problem

I have a large file that I am grepping to find a certain string. grep 'C:\Data\Directory\Test.txt' test.txt It can not find it even though I know it is in there . I know that there is a problem with the backslashes but I can't get it to work. I tried grep... (2 Replies)
Discussion started by: lesstjm
2 Replies

10. UNIX for Dummies Questions & Answers

grep problem

Hi I would like to know wheather there is anyway to pass a variable to grep argument like this grep "$myvar" $myfile i would put this in a function and then call this function by setting different values to myvar and myfile. is this possible at all. regards Hrishy (4 Replies)
Discussion started by: xiamin
4 Replies
Login or Register to Ask a Question