How to rebuild root disk - 280R

10 More Discussions You Might Find Interesting

1. Solaris

Mirror root disk - V490

Got a V490 with one existing root disk. Other disk slot was never populated. Want to ensure we've got disk mirroring. Currently vfstab mounts the physical disk - no mirroring set up. Whats best way to achieve this without losing current disk?

2. Solaris

Lost Root Password on VXVM Encapsulated Root Disk

Hi All Hope it's okay to post on this sub-forum, couldn't find a better place I've got a 480R running solaris 8 with veritas volume manager managing all filesystems, including an encapsulated root disk (I believe the root disk is encapsulated as one of the root mirror disks has an entry under...

3. Solaris

Mirror the root disk

Hi all I wish to mirror for the root disk, but last time i do, make the server cannot boot up. :p So this time, hope you guys can assist me on it. =) At the last code, is the step i wish to do. Please help to check and correct me if got any wrong. root@leo # format </dev/null Searching for...

4. Solaris

replacing root disk SunFire 280R

Hi, We had a disk go bad in this SunFire 280R, running Solaris 8 - Generic_117350-46. We replaced the disk and partitioned it. We metadetached all the metadevices but for some reason the new disk is showing up in the metadb as Concat/Stripe and it won't let us re-sync the mirror. We are not...

5. UNIX for Dummies Questions & Answers

How to mount disk for non-root accounts?

I have a USB disk on a little NAS controller (NSLU2 running unslung 6.8) that I can access nicely with root with mount -t cifs \\\\10.134.23.23\\DISK\ 2 /mnt/LKGD7F73A However, when I run emacs from an user mode xterm prompt, emacs cannot read and write the files on /mnt/LKGD7F73A. Emacs can...

6. Solaris

Veritas root disk mirroring

Hi there, My task is to replace the two 73 G disks with two 143 G disks , which has vxvm 4.1 running on it. I would like to know whether the steps iam following are correct. 1. Break the sub-disks, plexes of the root mirror. 2. Remove the sub-disks,plexes of the root mirror. 3. Remove one of...

7. HP-UX

How to rebuild a new disk

Hi.... I newbee to this and wanted help on hpux11 system. Disk is being replaced and need to rebuild and what r the commands I need to perform after the disk is swapped :confused: Thanks!

8. HP-UX

Rebuild disk or drive?

I thought I would post it again..once a bad drive is replaced need to rebuild it right?? Is disk and drive same? So what command need when the disk gets replaces. When i did diskinfo...and found out the bad disk...and need to replace that.. Thanks if someone could answer this question i have.

9. Solaris

LaCie Big Disk configuration on SUN 280R

hi , i am trying to configure LaCie Big Disk on solaris 9 running on a 280R server . i am trying to use the USB prot to connect to the external disk . please i need help on this as i have no clue on how and from where to start . thanks for ur help . cheers

10. Solaris

Solaris mirroring / non-root disk

Hi Guys, Need to add 2 disks into a JBOD array (3310). Does anyone see anything wrong with my Procedure / Doco below? 1> Logon to system, check system logs for abnormal entries. 2> Make backups of related system files: A>cp -p /etc/system /etc/system.backup.081505 B>cp -p /etc/vfstab...

LEARN ABOUT OSF1

volunroot

volunroot(8)						      System Manager's Manual						      volunroot(8)

NAME

       volunroot - Remove Logical Storage Manager hooks for rootable volumes

SYNOPSIS

       /usr/sbin/volunroot [-a	| -A]

OPTIONS

       Specifies  that	all  volumes on the system disk be converted back to UNIX disk partitions, not just the root and swap volumes, rootvol and
       swapvol.  Forces removal of the private region unless it is the last one in the system.

DESCRIPTION

       The volunroot script can be used to restore the accessibility of the root, swap, and other file systems on the boot disk  directly  through
       disk  partitions  instead  of  through volume devices. The script also removes other changes that were made to enable booting of the system
       from the root volume, so that the system will boot with no dependency on the Logical Storage Manager.

       When used with no options, volunroot affects only the root and swap volumes, rootvol and swapvol.

       For volunroot to work properly, only one plex must exist for each of the affected volumes. This plex must be the one created by	volrootmir
       or the original plex created when the root disk was encapsulated. This ensures that the underlying subdisks will have equivalent partitions
       defined for them on the disk.

       If these conditions are not met, the volunroot operation fails and none of the volumes are converted to disk partitions.

       The unwanted plexes can be removed using either voledit or volplex.

SEE ALSO

       volencap(8), voldiskadm(8), voledit(8), volintro(8), volplex(8), volrootmir(8)

																      volunroot(8)

Solaris