I have a problem with my x4270_m2 server. I have a GBE lan built into the back of my server and I have a QGE pci card in slot 2 to be used as a redundant.
My server is not picking up the QGE lan card in slot2. From investigation of the /etc/path_to_inst, which shows:
A collegue has informed me that the file shows that the card is in slot2.
My question is:
1. How can you tell which slot the pci card is inserted into from the above file, and
2. What are the changes I need to make if I needed the card to be in slot 5 (besides physically moving it)?
If anyone can help, I would really appreciate it
/Kerry
Moderator's Comments:
please use code tags
Last edited by DukeNuke2; 02-04-2011 at 06:30 AM..
I've moved the LAN card from Slot2 to the correct spot (Slot5)
and done the touch / reconfigure and devfsadm, however the strange thing that happens is that im able to configure e1000g7 with an ip address (192.168.0.1) but if i plug my laptop (set with static ip address of 192.168.0.10) to the back of the server on port e1000g7 with a straight cable, i am not able to ping that IP address...i get 'unreachable host'
:wall::wall::wall:how to register ISR for PCI slot using callback registery (in c programing)
i am using fedora 10 os.:wall::wall::wall::wall::wall: (0 Replies)
Hi,
I've recently moved my pci LAN card from Slot2 Slot5 on my sun x4270_m2 server (solaris 10).
I've done the touch / reconfigure and devfsadm, however my issue is that im able to configure the e1000g7 port with an ip address (192.168.0.1) but if i plug my laptop (set with static ip... (7 Replies)
I installed PCI Card HP SC44Ge - SAS1068E
on my linux CentOS 5.4
is there a way to find out if the PCI is properly installed and recognized by linux.
lspci is enough?
just to add that PCI card is connected to a tape...
also how can I find out driver and firmware version?
thanks a... (1 Reply)
Hi,
How can I know slot wise info on a sun v480 box. I want to have the details like which slot has which card (slot 1- HBA, slot 2 - quad NIC) ..
I know that sysdef, prtconf or prtdiag outputs will help to get this. But I dont know how to conclude from those outputs. Can anybody help me to... (4 Replies)
I have a US Robotics USR5416 wireless networking card and everytime after hours of inactivity the cardseems to shutdown. I read somewhere the it does not support power management. Is there a way to disable power management to that particular PCI card? (0 Replies)
Hi,
im having a problem installing my pci wireless card. Im using knoppix, but my problem is with the mobo i think. im using an older laptop, toshiba satellite 2540 and when i plug in the card i get lights on sometimes. this means its getting power right. so then to install the card into the... (0 Replies)
Hi everyone, I recently inherited an IBM RS/6000 43P 150, and it appears that the on board ethernet is dead. Can I put in a PCI ethernet card and use that as the default ethernet connection (as opposed to the one on the motherboard)? If so, what type of card can I use and how does one configure... (2 Replies)
hello mates,
do you know a manufactor for rs232 serial pci cards for the sparc architecture? it seems that there is no original product from sun for that purpose. strange, isn't it?
problem is that i have a V250 with only one db9 rs232 serial port, and i need it for a modem connection, but i also... (1 Reply)