Hi Gurus,
I have difficulty in configuring removable hard disk in Solaris 8.
I have connected hard disk to machine but I do not know how to configure it.
Kindly tell me, how should I configure it .. so that I can create a mount point on this and write files to them.
I am connecting this via USB port.
I tried below.
1) I tried killing vold process with -HUP signal.
2) Stopped /etc/init.d/volmgt
3) Now I am unable to start it.
When I execute /etc/init.d/volmgt start
It shows nothing failure, but when I grepped for vold deamon, I am not able to find it.
I tried starting service even after removing that thoshiba disk also. But no difference...
That is ... now I am unable to start volmgt now.
4) I executed "devfsadm" command. But no difference I found.
All the difference I can see is ..... Just in "prtconf -v" command output ...
I can see below message in prtdiag out put,when disk is connected.
Last edited by DukeNuke2; 11-09-2010 at 05:04 AM..
Hi,
How can i use a old window 200Gb IDE harddisk on Solaris8.
At the Solaris 8 install utility, it could only detect 50Mb for space !
Is the format wrong ?
Do i need to re-do the partition ?
I am using a Sunblade150 with solaris8
Thank u for the help... (1 Reply)
Dear all,
I have a Sol 10 server.
When I put df -h , it is showing the mount points of all file systems,
but when I format the server it is showing the below output
bash-3.00# format
Searching for disks...done
No disks found!
Pl let me know what is the problem for this.
... (5 Replies)
Dear All,
I have a task of resizing the Solaris Partitions.
This server contains SVM. Kindly let me know the steps in resizing the partitions and precautions.
Regards
Rj (3 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Hi Peeps,
Trying to run analyze and verify on a disk, it won't as it's telling me the disk is write protected. Anyone got any ideas on how to remove the write protection????
Didn't even know you could write protect hard disks.
Thanks for any advice
Marty (2 Replies)
I am looking for some tips or suggestions in how to do the following.
1) From a Solaris server, I run the command iostat -En and receive output that is similiar to the following which shows your disks along with the cdrom/dvdrom:
c0t2d0 Soft Errors: 0 Hard Errors: 0 Transport... (1 Reply)
Hi,
am a newbie at solaris. Need advice and help on this.
1) How do I break the mirror between 2 hard disks. (wish to keep 1 good hard disk as backup)
2) After remove 1 hard disk and put in new hard disk, how do I initialise or fomat the new hard disk?
3) How do I put back the backup... (3 Replies)
Hi Friends !
How long does it take to format a hard disk under Solaris ?
Once the format starts, what data will be cleared or deleted first ? i.e whether the OS is cleared or all the data other than OS is cleared first ?
Then, if the format starts and the power goes off, can i retrieve data?... (1 Reply)
Hello
I am trying to read from a small disk , 256 MB , removable sandisk.I am not able to access the device. The system does not recognise my disk to copy file s from the disk.
Please post your solution in this issue.
Thanks (2 Replies)
Hello there !!!
I am going to install solaris 8 on brand new hard disk, which i just attatched with computer.
Hard disk is already formated or do i have to use some kind of fdisk prior to install solaris ?
OR solaris automatically format this new hard disk ?
How does this work with... (2 Replies)