Login or Register to Ask a Question and Join Our Community


Solaris

D1000 Storedge array connection

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris D1000 Storedge array connection
# 1  
Old 11-05-2010
D1000 Storedge array connection
I am trying to connect D1000 storedge with my sun blade 1500 and i am getting the following error when booting the system.

Code:
Oct 13 22:21:56 brampton rpcbind: [ID 564983 daemon.error] rpcbind terminating on signal.
Oct 13 22:22:02 brampton syseventd[374]: [ID 617319 daemon.error] SIGHUP caught - reloading modules
Oct 13 22:22:02 brampton svc.startd[7]: [ID 636263 daemon.warning] svc:/system/sysevent:default: Method "/lib/svc/method/svc-syseventd stop 25" failed due to signal HUP.
Oct 13 22:22:02 brampton vxesd[620]: [ID 477869 daemon.notice] Event source daemon stopped
Oct 13 22:22:03 brampton syseventd[374]: [ID 661968 daemon.error] Daemon restarted
Oct 13 22:22:03 brampton genunix: [ID 723447 kern.warning] WARNING: vmem_destroy('devfsadm_event_channel'): leaked 1 identifiers
Oct 13 22:22:28 brampton genunix: [ID 672855 kern.notice] syncing file systems...
Oct 13 22:22:28 brampton genunix: [ID 904073 kern.notice]  done
Oct 13 22:56:10 brampton genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 Version Generic_142909-17 64-bit
Oct 13 22:56:10 brampton genunix: [ID 877030 kern.notice] Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Oct 13 22:56:10 brampton genunix: [ID 678236 kern.info] Ethernet address = 8:0:20:ad:44:36
Oct 13 22:56:10 brampton unix: [ID 673563 kern.info] NOTICE: Kernel Cage is ENABLED
Oct 13 22:56:10 brampton unix: [ID 389951 kern.info] mem = 1048576K (0x40000000)
Oct 13 22:56:10 brampton unix: [ID 930857 kern.info] avail mem = 1006714880
Oct 13 22:56:10 brampton rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 450MHz)
Oct 13 22:56:10 brampton rootnex: [ID 349649 kern.info] pseudo0 at root
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] pseudo0 is /pseudo
Oct 13 22:56:10 brampton rootnex: [ID 349649 kern.info] scsi_vhci0 at root
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci
Oct 13 22:56:10 brampton rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA 0x1f 0x4000
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] pcipsy0 is /pci@1f,4000
Oct 13 22:56:10 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3 (glm0):
Oct 13 22:56:10 brampton     Rev. 5 Symbios 53c876 found.
Oct 13 22:56:10 brampton pcipsy: [ID 370704 kern.info] PCI-device: scsi@3, glm0
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] glm0 is /pci@1f,4000/scsi@3
Oct 13 22:56:10 brampton scsi: [ID 193665 kern.info] sd4 at glm0: target 0 lun 0
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] sd4 is /pci@1f,4000/scsi@3/sd@0,0
Oct 13 22:56:10 brampton swapgeneric: [ID 308332 kern.info] root on /pci@1f,4000/scsi@3/disk@0,0:a fstype ufs
Oct 13 22:56:10 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@3,1 (glm1):
Oct 13 22:56:10 brampton     Rev. 5 Symbios 53c876 found.
Oct 13 22:56:10 brampton pcipsy: [ID 370704 kern.info] PCI-device: scsi@3,1, glm1
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] glm1 is /pci@1f,4000/scsi@3,1
Oct 13 22:56:10 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:56:10 brampton     Rev. 5 Symbios 53c876 found.
Oct 13 22:56:10 brampton pcipsy: [ID 370704 kern.info] PCI-device: scsi@5, glm2
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] glm2 is /pci@1f,4000/scsi@5
Oct 13 22:56:10 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5,1 (glm3):
Oct 13 22:56:10 brampton     Rev. 5 Symbios 53c876 found.
Oct 13 22:56:10 brampton pcipsy: [ID 370704 kern.info] PCI-device: scsi@5,1, glm3
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] glm3 is /pci@1f,4000/scsi@5,1
Oct 13 22:56:10 brampton scsi: [ID 193665 kern.info] sd0 at glm0: target 1 lun 0
Oct 13 22:56:10 brampton genunix: [ID 936769 kern.info] sd0 is /pci@1f,4000/scsi@3/sd@1,0
Oct 13 22:56:11 brampton scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Oct 13 22:56:11 brampton genunix: [ID 936769 kern.info] sd6 is /pci@1f,4000/scsi@3/sd@6,0
Oct 13 22:56:14 brampton rootnex: [ID 349649 kern.info] iscsi0 at root
Oct 13 22:56:14 brampton genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Oct 13 22:57:20 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton     Cmd (0x30001107d48) dump for Target 0 Lun 0:
Oct 13 22:57:20 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton         cdb=[ 0x12 0x0 0x0 0x0 0x30 0x0 ]
Oct 13 22:57:20 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton     pkt_flags=0x808 pkt_statistics=0x60 pkt_state=0x7
Oct 13 22:57:20 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton     pkt_scbp=0x0 cmd_flags=0x2860
Oct 13 22:57:20 brampton scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton     Connected command timeout for Target 0.0
Oct 13 22:57:20 brampton genunix: [ID 408822 kern.info] NOTICE: glm2: fault detected in device; service still available
Oct 13 22:57:20 brampton genunix: [ID 611667 kern.info] NOTICE: glm2: Connected command timeout for Target 0.0
Oct 13 22:57:20 brampton glm: [ID 280919 kern.warning] WARNING: ID[SUNWpd.glm.cmd_timeout.6017]
Oct 13 22:57:20 brampton scsi: [ID 107833 kern.warning] WARNING: /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:57:20 brampton     got SCSI bus reset
Oct 13 22:57:20 brampton genunix: [ID 408822 kern.info] NOTICE: glm2: fault detected in device; service still available
Oct 13 22:57:20 brampton genunix: [ID 611667 kern.info] NOTICE: glm2: got SCSI bus reset
Oct 13 22:58:31 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:58:31 brampton     Cmd (0x30001107d48) dump for Target 0 Lun 0:
Oct 13 22:58:31 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):
Oct 13 22:58:31 brampton         cdb=[ 0x12 0x0 0x0 0x0 0x30 0x0 ]
Oct 13 22:58:31 brampton scsi: [ID 365881 kern.info] /pci@1f,4000/scsi@5 (glm2):


Please help.

I am not sure how the configuration option and box id works.
Last edited by pludi; 11-05-2010 at 03:16 AM.. Reason: code tags, please...
# 2  
Old 11-05-2010
how do you connect the box to your blade? please discribe in detail... which scsi card do you use and so on...
# 3  
Old 11-05-2010
I have two nodes connected to this array via SCSI cables.
SCSI initiator id is set 6 on one node and 7 on other node. its dual scsi connection.
# 4  
Old 11-05-2010
Don't know whether if it is your prob,but maybe check: disks ID should be within the range of what is specified in the drivers.
# 5  
Old 11-05-2010
Quote:
Originally Posted by mnathan
I have two nodes connected to this array via SCSI cables.
SCSI initiator id is set 6 on one node and 7 on other node. its dual scsi connection.
again, what kind of SCSI HBA do you use?
# 6  
Old 11-07-2010
what is the box id on the back of the array ?

what is used for?
# 7  
Old 11-07-2010
Sun StorEdge A1000 and D1000 Installation, Operations, and Service Manual - Sun Microsystems
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 10 ftp connection problem (connection refused, connection timed out)

Hi everyone, I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
Discussion started by: labdakos
4 Replies

2. Solaris

What is STOREDGE In SOLARIS?

Hi, My question is What is StorEdge in Solairs? What are A1000 AND D1000? (3 Replies)
Discussion started by: aparna66
3 Replies

3. Solaris

connection problem with Storedge D1000

Hi, Recently i was trying to connect Sun Storedge D1000 Array to E420 R (Practice servers). I connected the SCSI cable between array and server. I tried the following : #devfsadm (nothing showed up) #format (no new disk is shown here) i tried this process again after putting ON the... (2 Replies)
Discussion started by: bluegold86
2 Replies

4. Solaris

Storedge IP

Hi Community, could you provide me a procedure or solaris 10 tool/command or Veritas command to check ths Storedge IP? Thank you!!! (4 Replies)
Discussion started by: Sunb3
4 Replies

5. Solaris

Storedge Configuration

Hi Community, I'm working on Solaris 10 installation with 1 Sun Server V490 and 1 StoredgeTek 3510 (Standalone configuration). I connected the Server to the Storedge with 1 fiber cables and I created 3 LUNs with RAID1 Configuration. Today I've a problem, infact I have to connect a second... (3 Replies)
Discussion started by: Sunb3
3 Replies

6. Solaris

Storedge D1000 sharing disks between two boxes

Hello, I have a d1000, it's connected to two servers, I want both servers to see all disks in the array. i.e. i have 6 disks, 3 in each side, I want both servers to see all 6 disks. It appears to be setup in a split bus mode now, ive looked thru the manuals and have become confused! So,... (2 Replies)
Discussion started by: BG_JrAdmin
2 Replies

7. UNIX for Advanced & Expert Users

d1000 or minipac with six disk slot

Hi All, Is there anyway two nodes can share D1000 or minipack with 6 disk slots. Right now I have minipacks and I am connecting to Sunblade 100 and Sunbladew 150 separately. I would like to connect two systems to one minipack and able see the all the disks on both systems. I do have D1000... (0 Replies)
Discussion started by: sriny
0 Replies

8. Solaris

storEDGE A5000 disk Array

Do you know how do I make my solaris 8 detect the storEDGE A5000?. I have problem making it recognise, without that I cannot install VxVM. Any ideas? (7 Replies)
Discussion started by: calsum
7 Replies

9. Solaris

Using Enterprise 4500 with storedge D100 and storedge A5200

Sorry if this seems trivial. i have been given a task at work to configure a sun processing server "enterprise 4500" so it can work with the a storage server "storedge A5200" and "storedge D1000" the truth is i have never worked on a sun server before. i need a guideline (step by step) as to... (5 Replies)
Discussion started by: lawalidowu
5 Replies

10. Solaris

probe-scsi-all hangs probing D1000

Hi folks, I´m having a problem with a Ultra60 box with diff scsi pci card conected to one D1000. The conection are correct because a checked the D1000 guide. When a do probe-scsi-all in the OBP, the D1000 blink all disks one time then the led of one of the disks powers off and then nothing... (2 Replies)
Discussion started by: spacewalker
2 Replies
Login or Register to Ask a Question