10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
2. Solaris
Hi,
I have a SUN Fire V440 server running Solaris 8. One of the 4 disks do not appear when issued the format command. The "ready to remove" LED is not on either.
Metastat command warns that this disk "Needs maintenace". Can I just shutdown and power off the machine and then insert an... (5 Replies)
Discussion started by: Echo68
5 Replies
3. Solaris
Hi,
I have Sun Fire V440. Boot disks are mirrored. system crashed and it's not coming up. Error message is
Insufficient metadevice database replicas located. Use Metadb to delete databases which are broken.
Boot disks are mirrored and other disks are ZFS configuration. Please... (2 Replies)
Discussion started by: samnyc
2 Replies
4. Solaris
I have bought from eBay a second hand Sun Fire V210 server and I'm really stumped at the lack of complete instructions on how to connect to it.
I don't have a Windows machine, I've only got Ubuntu and OS X computers. None of them have an old RS-232 port on them either.
In saying that, I have... (12 Replies)
Discussion started by: danijeljames
12 Replies
5. Solaris
Dear Team,
I need some expert advice to my problem.
We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
Discussion started by: sudhansu
5 Replies
6. Solaris
Hi:
I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Discussion started by: mguazzardo
1 Replies
7. Solaris
Hello,
I am seeing error messages in V440 (OS = solaris 8). I have copied here :
The system does not reboot constantly and it is up for last 67 days. One more interesting thing I found, I see errors start appearing at 4:52AM last until 6am and again start at 16:52am on same day..
I... (5 Replies)
Discussion started by: upengan78
5 Replies
8. Solaris
First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:
>@(#) Sun Fire V440,Netra... (14 Replies)
Discussion started by: Alisher
14 Replies
9. Solaris
Hello,
I hope you can help me. I am new to Sun servers and we have a Sun Fire v440 server in which one power supply failed, we are waiting for new one. But now our server is shutting down constantly. Is there any setting with which we can prevent this behaviour? (1 Reply)
Discussion started by: Tibor
1 Replies
10. Solaris
Got an curious issue.
I applied 109147-39 to, oh 15 or so various systems all running Jumpstarted Solaris 8. When I hit the first two V440s, they both failed with Return code 139. All non shell commands segfaulted from then on.
The patch modified mainly the linker libraries and commands.
... (2 Replies)
Discussion started by: BOFH
2 Replies
VDEQ(1) General Commands Manual VDEQ(1)
NAME
vdeq - Virtual Distributed Ethernet wrapper for QEMU/KVM virtual machines
SYNOPSIS
vdeq qemu [ --mod octalmode ] QEMU_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] QEMU_OPTIONS
vdeq kvm [ --mod octalmode ] KVM_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] KVM_OPTIONS
vde{qemu_name} [ --mod octalmode ] QEMU_OPTIONS -net vde[,vlan=n][,sock=socketpath][,port=n] QEMU_OPTIONS
OLD SYNOPSIS
vdeq qemu [ --mod octalmode ] [ -sock socketpath [ ,socketpath [ ,... ] ] ] [ qemu_args ]
vde{qemu_name} [ -sock socketpath [ ,socketpath [ ,... ] ] ] [ qemu_args ]
DESCRIPTION
vdeq is a wrapper to start a QEMU/KVM virtual machine connected to a VDE network. It uses the qemu/kvm -tun-fd parameter to set up the
connection with a vde_switch.
The command
vdeq qemu -b c -hda=sampledisk
starts a qemu machine which boots from the sampledisk image and has a ne2000 ethernet interface connected to the standard vde_switch. The
command
vdeq kvm -b c -hda=sampledisk
starts a kvm machine which boots from the sampledisk image and has a ne2000 ethernet interface connected to the standard vde_switch.
It is also possible to create symbolic links to the vdeq executable to have a simpler command. If the link has a name that begins with vde
the remaining part of the name is taken as the qemu command. For example if vdeq is linked to vdeqemu:
vdeqemu -b c -hda=sampledisk
starts qemu as above. If vdeq is linked to vdekvm:
vdekvm -b c -hda=sampledisk
starts kvm with the same parameters.
The new syntax is consistent with the new Qemu 0.8.0 network parameters. Using vdeq is possible to specify a vde interface in the same way
as user,tap or socket interfaces. The sock= parameter can be used to use a specific socket. Please note that what qemu names as vlan is
not related to the 802.1q VLAN managed by the vde_switch. port= can be used to specify the port of the switch, otherwise the first allo-
catable port is assigned. The following command run a qemu VM with two ethernet interface connected to the standard switch and to the
switch with local socket "/tmp/my.ctl", port 10, respectively
vde qemu -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10
vdeqemu -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10
The following command run a kvm VM with two ethernet interface connected to the standard switch and to the switch with local socket
"/tmp/my.ctl", port 10, respectively
vde kvm -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10
vdekvm -net nic,vlan=0 -net nic,vlan=1 -net vde,vlan=0 -net vde,vlan=1,sock=/tmp/my.ctl,port=10
The old syntax can be used with Qemu 0.8.0 but all the vde interfaces are assigned to vlan 0.
vdeq qemu -sock /tmp/vde.ctl,/tmp/my.ctl -b c -hda=sampledisk
vdeqemu -sock /tmp/vde.ctl,/tmp/my.ctl -b c -hda=sampledisk
both start qemu with one ethernet interface connected both to the standard switch and to the switch with local socket "/tmp/my.ctl".
OPTIONS
--mod octalmode, specify the mode for comm socket.
-sock socketpath, specify the UNIX socket to be used by local programs for joining the VDE. The default value is "/tmp/vde.ctl" It is
also possible to indicate several socketpath (comma separated, no blanks): in this case several interfaces are defined. The first
socketpath is connected to the first ne2k interface and so on.
-h, -help, --help
print a Usage help.
NOTE
Qemu has changed its syntax for networking (cvs Nov.15 2005). As a temporary solution use vdeoq and vdeoqemu instead of vdeq and vdeqemu
if you are running a qemu with the old syntax.
By default qemu uses the same MAC address for every virtual machine, so if you plan to use several instances of qemu be sure to explicitly
set a different MAC address for each virtual machine. While generating your address beware to not use broadcast/multicast reserved MACs,
ethernet rules say: the multicast bit is the low-order bit of the first byte, which is "the first bit on the wire". For example
34:12:de:ad:be:ef is an unicast address, 35:12:de:ad:be:ef is a multicast address (see ETHERNET MULTICAST ADDRESSES section in
http://www.iana.org/assignments/ethernet-numbers for more informations).
NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik"
i.e. the German "Association for Electrical, Electronic & Information Technologies").
SEE ALSO
vde_switch(1), vde_plug(1), vde_plug2tap(1), dpipe(1).
AUTHOR
VDE is a project by Renzo Davoli <renzo@cs.unibo.it>
Virtual Distributed Ethernet December 6, 2006 VDEQ(1)