System hangs


 
Thread Tools Search this Thread
Operating Systems Solaris System hangs
# 1  
Old 10-06-2010
System hangs

Hi,

today when i started the OS Sun Solaris 10 it hangs on initialization. Following was shown in the end of the screen

Initializing system
Please wait....




*

Please help?
# 2  
Old 10-06-2010
What is the hardware of the system and can you paste both the command and output you got when starting the OS.

Regards,
Vishal
# 3  
Old 10-06-2010
Quote:
Originally Posted by vishalaswani
What is the hardware of the system and can you paste both the command and output you got when starting the OS.

Regards,
Vishal
Solaris is installed on my local system. it worked fine and also today. but it remain idle for 1 hour so when i tried to ping it. it was not available. so restart the system. but while autobooting it stucked on the following screem

HTML Code:
SunOS Secondary boot version 4.02
                          Solaris Booting System
 
Running Configuration Assistant
Autobooting from bootpath: /pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0:a
 
 
If the system hardware has changed, or to boot from a different 
device, interrupt the autoboot process by pressing ESC.
 
 
Initializing system
Please wait....
 
 
*
in regular running it showed in the end of the screen
Initializing system
Please wait....
Use is subject to license terms
# 4  
Old 10-07-2010
You mentioned that before you rebooted it you couldn't ping it.

As it is now stuck during boot I would look to its network connectivity.

Modern systems take ages to boot if they cannot "see" the network.

So start with the network cable and then check the NIC and the switch port.

If it is easy to replace the network cable, do so.

Regards
Neil
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Xt timer call, XtAppAddTimeout, hangs on system clock jump backwards

Hi, I've got an issue which I've been 'google-fu'ing without much luck. We have a legacy program which has been plagued by an issue for a long time and I've been tasked to investigate/fix. The program uses XMotif2.1 (required due to dependency on an old GUI designer) and runs on a RHEL7... (4 Replies)
Discussion started by: altrefrain
4 Replies

2. AIX

Cloning a system via mksysb backup from one system and restore to new system

Hello All, I am trying to clone an entire AIX virtual machine to a new virtual machine including all partitions and OS.Can anyone help me on the procedure to follow? I am not really sure on how it can be done.Thanks in advance. Please use CODE tags for sample input, sample output, and for code... (4 Replies)
Discussion started by: gull05
4 Replies

3. Red Hat

system freezes / hangs

Hi, We're using - openldap-2.3.43-12.el5_6.5 nss_ldap-253-25.el5 on RHEL-5.5 Intermittently the entire system hangs, no message is present in any of the log files, login to the system fails, ssh fails, ping fails, the only way to recover is to hard-boot the system. We consulted... (3 Replies)
Discussion started by: TheRock
3 Replies

4. Solaris

Solaris 10 system hangs

Solaris 10 (Sun V210) System hangs every couple of months. Have to go into ALOM to reset. I did a consolehistory report and seen this in it. Failed to exec inetd_start method of instance svc:/network/bootps/udp:default: I/O error WARNING: /pci@1c,600000/scsi@2 (glm0): Resetting... (3 Replies)
Discussion started by: Joeentech
3 Replies

5. Red Hat

Linux system hangs giving ntp errors

Hi folks, I am facing issue of my system (host1) getting hanged after throwing following ntpd messages. I am not able to ssh to the server there after. only option is to restart the host: Dec 29 02:58:51 host1 ntpd: time reset -0.207907 s Dec 29 02:58:51 host1 ntpd: synchronisation lost Dec 29... (0 Replies)
Discussion started by: SiddhV
0 Replies

6. Solaris

System hangs (freezes) on system bell/beep

I am running OpenIndiana development version oi_148 32-bit on a seven-year-old Dell Inspiron 8600. Seems to be running fine except for one particular annoyance: It freezes whenever a system bell/beep plays. I have mitigated this by turning the system bell off in gnome-terminal, which I use... (3 Replies)
Discussion started by: DeadBadger
3 Replies

7. AIX

telnet hangs

Hi All, When I tried to telnet to lparB from lparA, it hangs at "Escape character is..". I've tried; - killed -15 - re-started it - edit netsvc.conf, hosts=local,bind and hosts=local,bind4 - checked /etc/hosts for 127.0.0.1 loopback localhost - copy original inetd.conf ... (3 Replies)
Discussion started by: fara_aris
3 Replies

8. UNIX for Advanced & Expert Users

system hangs in case of driver

hi, i am working on device drivers in linux kernel-2.6.11. Distribution is Mandrake-10.2. Basically i have to port the driver from kernel-2.4 to kernel-2.6.11. My system hangs,when ever an application calls select. Basically the kernel code for select, contains only 2 apis void poll_wait... (0 Replies)
Discussion started by: sriram.ec
0 Replies

9. Filesystems, Disks and Memory

Pulling a drive on RAID1 hangs system

I'm setting up a server with software RAID1, and everything is working perfectly, except that when I pull either of the drives, the system completely hangs and has to be rebooted. The computer is a Tyan Transport GX28, which is alleged to have hot-swappable SATA. I can fail a drive and the system... (1 Reply)
Discussion started by: vertigo23
1 Replies

10. SCO

System hangs on data compression

Hi, We are having an automated system installed on SCO unixware, which runs a End Of Day routine during midnight. Since few days system is hanging at data backup, I have checked the log, system hangs exactly on data compression, any idea or help that why system is hanging only on compression....... (10 Replies)
Discussion started by: tayyabq8
10 Replies
Login or Register to Ask a Question