09-24-2010
6,
0
Join Date: Sep 2010
Last Activity: 1 October 2010, 2:49 PM EDT
Posts: 6
Thanks Given: 0
Thanked 0 Times in 0 Posts
Greentings all,
Apologies for my delayed response:
May thanks for the replies; much appreciated. I uninstalled the original jumpstart
config I used and installed JET I still get replies from rpcinfo, so I'm kinda happy
that the bootp server is ok...
Apologies for the delayed response:
Kumarmani: Yip it's on the same subnet ( At least I think so!! I can't get to the NIC to set an IP/MASK... but the intention is to have it on the same subnet)
DukeNuke2:
Now that's what I'm not sure of. There are physical devices in the box, although I'm not getting a status when I hook up a cable. I know the cable works because I tested it on domain 0. The other thing is that I'm not sure what MAC to assign it. I did a "banner" from the OBP and used that MAC address. Not sure how to pic up the MAC's from the other NICs as there's nothing running there and I'm not sure hw to pic it up from XSCF>
devalias returns nothing...
Unclefab:
after doing a reset-all, when I got control back, probe-scsi-all yielded nothing
I did a reset-all again and then did a watch-net-all.. also nothing:
{0} ok watch-net-all
{0} ok
Thanks for your suggestions!!