Hi again Kumarmani,
thanks again for your suggestions, have tryed all that you told me without success. Tryed resetting via setenv and eepromm as well.
Here is printout of eeprom, prehaps you could check it and see if you can see anything that maybe stopping me from resetting back to ok prompt.
It reads as follows;
output-device=rsc-console
input-device=rsc-console
load-base=16384
auto-boot?=true
boot-command=boot
diag-file:data not available
diag-device=disk net
boot-file:data not available
boot-device=/pci@8,600000/SUNW,qlc@4...1/SUNW,gfe@3,1 devalias qfeo/pci@8,700000/pci@1/SUNW,qfe@o,1
security-mode=none
security-password:data not available
security-#badlogin=0
diag-out-console=true
#power-cycles=166
diag-script=none
diag-level=max
diag-switch=true
error-reset-recovery=boot
Tryed typing in setenv input-device keyboard and setenv output-device screen.
Typed in reset all and clicked on return and nothing happened.
Did this in eeproom terminal, is this correct?..
Cheers
Arjay