9 More Discussions You Might Find Interesting
1. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
2. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
3. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
4. Linux
I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it.
The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically.
I installed Windows first to see if... (2 Replies)
Discussion started by: lorewap3
2 Replies
5. Solaris
Hello everyone,
Background:
I'm having an issue with booting a clone of hard drive with Solaris 8 installation.
For cloning process I have used g4l, running under click'n'clone option. As far as I know the actual operation ran behind g4l's interface was dd, though I do not have any information... (12 Replies)
Discussion started by: johnny994
12 Replies
6. Solaris
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
Discussion started by: vr_mari
7 Replies
7. Solaris
Hello experts..
How can i grow Raid 5 volume in SVM?
Thanks in advance.. (2 Replies)
Discussion started by: younus_syed
2 Replies
8. Solaris
hi
this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network)
i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
Discussion started by: Landser
4 Replies
9. Solaris
I have this setup, i can only find docs to unmirror a raid 1 set, how do you get rid of a raid 5 set? the same way? metadetach and metaclear?
d8: RAID
State: Okay
Interlace: 32 blocks
Size: 142245693 blocks (67 GB)
Original device:
Size: 142247872 blocks (67 GB)
... (2 Replies)
Discussion started by: BG_JrAdmin
2 Replies
lsimega(7D) lsimega(7D)
NAME
lsimega - SCSI HBA driver for LSI MegaRAID 320-2x SCSI RAID Controller
The lsimega SCSI RAID host bus adapter driver is a SCSA-compliant nexus driver that supports LSI MegaRAID 320-2x SCSI RAID devices.
The lsimega driver supports standard functions provided by the SCSA interface, including RAID disk I/O and passthrough I/O to support
SCSI tape and CDROM.
DRIVER CONFIGURATION
The lsimega.conf file contains no user configurable parameters. Please configure your hardware through BIOS.
The LSI MegaRAID 320-2x device can support up to 40 logic drivers. Note that BIOS numbers the logic drives as 1 through 40, however in
Solaris these drives are numbered from 0 to 39.
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability | |
+-----------------------------+-----------------------------+
FILES
/kernel/drv/lsimega
32-bit ELF kernel module.
/kernel/drv/amd64/lsimega
64-bit kernel module ( only).
/kernel/drv/lsimega.conf
Driver configuration file (contains no user-configurable options).
prtconf(1M), attributes(5), amr(7D), scsi_hba_attach(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
20 April 2005 lsimega(7D)