10 More Discussions You Might Find Interesting
1. Fedora
Well, I followed the steps in the Debian wiki here to install the drivers for the following video card:
$ lspci | grep VGA
03:00.0 VGA compatible controller: NVIDIA Corporation GF104 (rev a1)I confirmed the correct driver is installed. As you probably see I've tried this a few times and a few... (1 Reply)
Discussion started by: Azrael
1 Replies
2. Linux
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)
Discussion started by: gacanepa
0 Replies
3. UNIX for Advanced & Expert Users
I'd like to install cpufreq modules on my server .
I tried
sudo modprobe acpi-cpufreq
but got the error
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.18-238.12.1.el5xen/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device
cat /proc/cpuinfo gives this
... (11 Replies)
Discussion started by: vishwamitra
11 Replies
4. SCO
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies
5. Shell Programming and Scripting
Hi,
I have a strange issue in my script.
When script is run from command prompt it runs fine,but when run from cron it exist with error message.
I narrowed down the issue and found that " use Mail::Sender;" is the culprit.
If I comment the statment the code runs fine in both command and... (9 Replies)
Discussion started by: coolbhai
9 Replies
6. Linux
Hi masters,
I am new to linux and unix forum and this is my first forum. So please excuse if
I am not giving sufficient information. I will give them on request.
I have created a bandwidth manager module. I am using a 2.6.9 kernel and in Red Hat 3.4.3 distribution. But when i run make... (1 Reply)
Discussion started by: iamjayanth
1 Replies
7. Linux
Hi all,
I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/.
I need to know if I can... (0 Replies)
Discussion started by: anitemp
0 Replies
8. SuSE
Hi All,
Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff.
Cheers,
Brendan (4 Replies)
Discussion started by: Brendan Kennedy
4 Replies
9. Solaris
When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error.
cannot find mis/krtld
boot error loading... (0 Replies)
Discussion started by: johncy_j
0 Replies
10. Programming
Hi there:
Thanks for clicking in first. I have a question here. I have a module that needs to be dynamically loaded when another piece of code needs it at runtime. I know that I will have to make a soname file before I can use it dynamically. My question is what commad I should use to make... (2 Replies)
Discussion started by: yanhu
2 Replies
MODULES-LOAD.D(5) modules-load.d MODULES-LOAD.D(5)
NAME
modules-load.d - Configure kernel modules to load at boot
SYNOPSIS
/etc/modules-load.d/*.conf
/run/modules-load.d/*.conf
/usr/lib/modules-load.d/*.conf
DESCRIPTION
systemd uses files from the above directories to configure kernel modules to load during boot in a static list. Each configuration file is
named in the style of /etc/modules-load.d/<program>.conf. Note that it is usually a better idea to use the automatic module loading by PCI
ID, by DMI ID or similar triggers configured in the kernel modules themselves instead of relying on static configuration like this.
CONFIGURATION FORMAT
The configuration files should simply contain a list of kernel module names to load, separated by newlines. Empty lines and lines whose
first non-whitespace character is # or ; are ignored.
Each configuration file is named in the style of <program>.conf. Files in /etc/ overwrite files with the same name in /usr/lib/. Files in
/run overwrite files with the same name in /etc/ and /usr/lib/. Packages should install their configuration files in /usr/lib/, files in
/etc/ are reserved for the local administration, which possibly decides to overwrite the configurations installed from packages. All files
are sorted by filename in alphabetical order, regardless in which of the directories they reside, to ensure that a specific configuration
file takes precedence over another file with an alphabetically later name.
EXAMPLE
Example 1. /etc/modules-load.d/virtio-net.conf example:
# Load virtio-net.ko at boot
virtio-net
SEE ALSO
systemd(1), modprobe(8)
AUTHOR
Lennart Poettering <lennart@poettering.net>
Developer
systemd 10/07/2013 MODULES-LOAD.D(5)