10 More Discussions You Might Find Interesting
1. Solaris
Hi
Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies
2. Solaris
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies
3. Solaris
Hello,
I need some help mirroring my rpool.
I have a 60gb ssd running the rpool alone and want to mirror it for redundancy so I bought a 120gb ssd that I found for a good price. 60gb drives aren't as easy to find at a good price anymore it seems.
I (a bit naively) thought after reading... (9 Replies)
Discussion started by: Zorken
9 Replies
4. Solaris
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies
5. Solaris
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies
6. Solaris
Hi,
I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database.
I seek in google and couldn't found it. Does anyone know how to achieve it?
Thanks. (2 Replies)
Discussion started by: mzainal
2 Replies
7. Solaris
Hi guys,
I have a Solaris 10 x86 server with 2 physical disks. It had a ZFS rpool on the first disk c0t0d0s0. The server stopped booting with some error like "Cannot find bootfile".
I booted with Solaris DVD and re-installed the operating system on the second disk with a different pool... (0 Replies)
Discussion started by: ARPcPro
0 Replies
8. Solaris
Hi All;
My server's root partition was encapsulated with VxVM, I try to convert it to ZFS. I successfully de-encapsulated root. Now I try to mirror 2 root disks using ZFS. But I receive following error:
# zpool create rpool mirror c0t0d0s0 c0t1d0s0
invalid vdev specification
use '-f' to... (6 Replies)
Discussion started by: reseki
6 Replies
9. Solaris
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies
10. Solaris
Hi,
We have a Sun M5000. I am now trying to boot the second system domain by using the boot disk (a mirrored boot disk actually) of the first domain (if succeed then no OS installation is needed for the second domain). I got the following errors:
SPARC Enterprise M5000 Server, using Domain... (21 Replies)
Discussion started by: aixlover
21 Replies
ppmtosixel(1) General Commands Manual ppmtosixel(1)
NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS
-raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO
ppm(5)
AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)