rpool issue


 
Thread Tools Search this Thread
Operating Systems Solaris rpool issue
# 1  
Old 07-05-2010
rpool issue

My system is showing following .. how can i remove this rpool .. ?

Code:
 

zpool status -v rpool
  pool: rpool
 state: UNAVAIL
status: One or more devices could not be opened.  There are insufficient
        replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
   see: http://www.sun.com/msg/ZFS-8000-3C
 scrub: none requested
config:

        NAME          STATE     READ WRITE CKSUM
        rpool         UNAVAIL      0     0     0  insufficient replicas
          mirror      UNAVAIL      0     0     0  corrupted data
            c1t0d0s0  ONLINE       0     0     0
            c1t5d0s0  UNAVAIL      0     0     0  cannot open



I removed the /etc/zfs/zpool.cache and then did zpool import -f and the rpool didn't show up again .. :-)

Last edited by fugitive; 07-05-2010 at 02:33 PM.. Reason: Problem resolved
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

How to increase the size of rpool in Solaris 11?

Hi Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies

2. Solaris

Trying to create ZFS slice on rpool

I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies

3. Solaris

Help with mirroring rpool

Hello, I need some help mirroring my rpool. I have a 60gb ssd running the rpool alone and want to mirror it for redundancy so I bought a 120gb ssd that I found for a good price. 60gb drives aren't as easy to find at a good price anymore it seems. I (a bit naively) thought after reading... (9 Replies)
Discussion started by: Zorken
9 Replies

4. Solaris

Need help to understand zfs rpool space allocation

Hi, I am unable to understand that, in one of my servers while df -kh Filesystem Size Used Available Capacity Mounted on rpool/ROOT/solaris-2 98G 11G 29G 29% / Even the Root FS filled on 40gb and system becomes unstable. it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies

5. Solaris

Zfs rpool size

Hi everyone, I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced. Filesystem Size Used Available Capacity Mounted on rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies

6. Solaris

Resize rpool

Hi, I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database. I seek in google and couldn't found it. Does anyone know how to achieve it? Thanks. (2 Replies)
Discussion started by: mzainal
2 Replies

7. Solaris

How to access content of problematic rpool ?

Hi guys, I have a Solaris 10 x86 server with 2 physical disks. It had a ZFS rpool on the first disk c0t0d0s0. The server stopped booting with some error like "Cannot find bootfile". I booted with Solaris DVD and re-installed the operating system on the second disk with a different pool... (0 Replies)
Discussion started by: ARPcPro
0 Replies

8. Solaris

Create rpool manually

Hi All; My server's root partition was encapsulated with VxVM, I try to convert it to ZFS. I successfully de-encapsulated root. Now I try to mirror 2 root disks using ZFS. But I receive following error: # zpool create rpool mirror c0t0d0s0 c0t1d0s0 invalid vdev specification use '-f' to... (6 Replies)
Discussion started by: reseki
6 Replies

9. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies

10. Solaris

How to change hostid saved in rpool?

Hi, We have a Sun M5000. I am now trying to boot the second system domain by using the boot disk (a mirrored boot disk actually) of the first domain (if succeed then no OS installation is needed for the second domain). I got the following errors: SPARC Enterprise M5000 Server, using Domain... (21 Replies)
Discussion started by: aixlover
21 Replies
Login or Register to Ask a Question
EMPTY-PAGE(1)							 ExactImage Manual						     EMPTY-PAGE(1)

NAME
empty-page - empty page detector of the ExactImage toolkit SYNOPSIS
empty-page [option...] {-i | --input} input-file empty-page {-h | --help} DESCRIPTION
ExactImage is a fast C++ image processing library. Unlike many other library frameworks it allows operation in several color spaces and bit depths natively, resulting in low memory and computational requirements. empty-page counts dark pixels of a black and white image and decides with a threshold whether the page is most probably empty, and thus can be removed from the image processing stream. OPTIONS
-i file, --input file Read image from the specified file. -m n, --margin n Set width of border margin to skip. For speed reasons, the margin has to be a multiple of 8. The default is 16. -p x, --percentage x Set fraction of permissible dark pixels. The default is 0.05 (5%). -h, --help Display help text and exit. EXAMPLES
$ empty-page -i test.tif The image has 75461 dark pixels from a total of 1060992 (7.11231%). non-empty EXIT STATUS
The exit status is 0 if the image is mostly white, 1 otherwise. SEE ALSO
exactimage(7) AUTHORS
Jakub Wilk <jwilk@debian.org> Wrote this manual page for the Debian system. http://www.exactcode.de/site/open_source/exactimage/ This manual page incorporates texts found on the ExactImage homepage. COPYRIGHT
This manual page was written for the Debian system (and may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 or (at your option) any later version published by the Free Software Foundation. On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL-2. empty-page 09/09/2013 EMPTY-PAGE(1)