10 More Discussions You Might Find Interesting
1. Solaris
Hi
Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies
2. Solaris
I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies
3. Solaris
Hello,
I need some help mirroring my rpool.
I have a 60gb ssd running the rpool alone and want to mirror it for redundancy so I bought a 120gb ssd that I found for a good price. 60gb drives aren't as easy to find at a good price anymore it seems.
I (a bit naively) thought after reading... (9 Replies)
Discussion started by: Zorken
9 Replies
4. Solaris
Hi,
I am unable to understand that, in one of my servers while
df -kh
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 11G 29G 29% /
Even the Root FS filled on 40gb and system becomes unstable.
it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies
5. Solaris
Hi everyone,
I am doing housekeeping of my Solaris 11 for zfs snapshot to reduce the snapshot size. I have already cleared the / file system, however the rpool size still not reduced.
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-2 98G 6.9G ... (2 Replies)
Discussion started by: freshmeat
2 Replies
6. Solaris
Hi,
I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database.
I seek in google and couldn't found it. Does anyone know how to achieve it?
Thanks. (2 Replies)
Discussion started by: mzainal
2 Replies
7. Solaris
Hi guys,
I have a Solaris 10 x86 server with 2 physical disks. It had a ZFS rpool on the first disk c0t0d0s0. The server stopped booting with some error like "Cannot find bootfile".
I booted with Solaris DVD and re-installed the operating system on the second disk with a different pool... (0 Replies)
Discussion started by: ARPcPro
0 Replies
8. Solaris
Hi All;
My server's root partition was encapsulated with VxVM, I try to convert it to ZFS. I successfully de-encapsulated root. Now I try to mirror 2 root disks using ZFS. But I receive following error:
# zpool create rpool mirror c0t0d0s0 c0t1d0s0
invalid vdev specification
use '-f' to... (6 Replies)
Discussion started by: reseki
6 Replies
9. Solaris
I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware.
I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror.
Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies
10. Solaris
Hi,
We have a Sun M5000. I am now trying to boot the second system domain by using the boot disk (a mirrored boot disk actually) of the first domain (if succeed then no OS installation is needed for the second domain). I got the following errors:
SPARC Enterprise M5000 Server, using Domain... (21 Replies)
Discussion started by: aixlover
21 Replies
zdb(1M) System Administration Commands zdb(1M)
NAME
zdb - ZFS debugger
SYNOPSIS
zdb pool
DESCRIPTION
The zdb command is used by support engineers to diagnose failures and gather statistics. Since the ZFS file system is always consistent on
disk and is self-repairing, zdb should only be run under the direction by a support engineer.
If no arguments are specified, zdb, performs basic consistency checks on the pool and associated datasets, and report any problems
detected.
Any options supported by this command are internal to Sun and subject to change at any time.
EXIT STATUS
The following exit values are returned:
0 The pool is consistent.
1 An error was detected.
2 Invalid command line options were specified.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWzfsu |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable |
+-----------------------------+-----------------------------+
SEE ALSO
zfs(1M), zpool(1M), attributes(5)
SunOS 5.11 31 Oct 2005 zdb(1M)
