Login or Register to Ask a Question and Join Our Community


Solaris

Problems including route on Sun Solaris

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Problems including route on Sun Solaris
# 1  
Old 06-28-2010
Problems including route on Sun Solaris
Hey Guys.

I am trying include a route on the Sun Solaris 10 System an get the follow respond:

Network is unreachable.

Let me show the command.

Code:
 root@ColectorDMSCNT # route add 200.44.46.0/27 161.196.84.193 1
add net 200.44.46.0/27: gateway 161.196.84.193: Network is unreachable

I can make a ping to the Default Gateway and I am in the correct /27 network.

Code:
root@ColectorDMSCNT # ping 161.196.84.193
161.196.84.193 is alive
root@ColectorDMSCNT # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.119.64.6 netmask ffffff00 broadcast 10.119.64.255
        ether 0:14:4f:e4:3:18
e1000g1: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
        inet 161.196.84.196 netmask ffffffc0 broadcast 161.196.84.255
        ether 0:14:4f:e4:3:19

Could Someone know the expansive mean of this system message?

Thank in Advanced.

ANGGAD.
# 2  
Old 06-28-2010
I would say e1000g1 is unplugged as it is missing the RUNNING state.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Couldn't add route on Solaris 10

Hi Solaris Experts, I am trying to add a routing table entry on our 5.1 Generic_144488-12 sun4v sparc Solaris 10 SUNW,SPARC-Enterprise-T5220 so that it is possible to ping 10.56.9.34 node # netstat -rnv IRE Table: IPv4 Destination Mask Gateway Device Mxfrg Rtt Ref Flg Out In/Fwd ... (2 Replies)
Discussion started by: gjackson123
2 Replies

2. Solaris

Add route to solaris 10

I need to add a new route on solaris10 machine. I want that all traffic on the 23 port (telnet) use 192.168.200.1 gateway. How I do ? Thank you in advance. (1 Reply)
Discussion started by: arfry
1 Replies

3. Solaris

Route new network interface Solaris 8

Hi there, I'm trying to configure an additional network interface on Solaris 8 (eri0). The interface has been activated, but all the frames are still routed to the current default interface (ce0) I've tried following command (with various syntaxes...) unsuccessfully so far: # route add... (2 Replies)
Discussion started by: sreiniche
2 Replies

4. Solaris

solaris 10 u5 what happens if no default route configured

Hi, I am new to solaris 10. What is the procedure the os takes if a default route is not configured? I am using a multihomed server with 4 interfaces. It looked strange to me this morning, because i had not defined a default route it defaulted to making one up, with the ip address of another... (9 Replies)
Discussion started by: borderblaster
9 Replies

5. Solaris

Solaris Route configuraion

Hi, Any one can help me in this below mentioned issue I am facing in my solaris server? here the scenario goes.... i have multiple segments in my LAN like remote csr, database, production etc. and all the segments are configured in Windows/CISCo network. from my all system in remote... (1 Reply)
Discussion started by: Praan
1 Replies

6. Solaris

SOLARIS does not route

hi, i installed solaris 9 on an SPARC server with two network interfaces. behind each interface is a small lan. i can reach every computer in every lan using one of the other interface when i am logged in the solaris. but if a computer from one lan has to connect to a computer on the other lan,... (4 Replies)
Discussion started by: bong02
4 Replies

7. Solaris

emulation problems printing from sun solaris

Genicom LG05 printer with LG emulation. Due to problems with printer a replacement printer was installed with LP+ emulation only. Does the queue on UNIX have to be modified or told about the change in emulation for it to print from sun solaris unix. What's the command? (0 Replies)
Discussion started by: ITBT
0 Replies

8. IP Networking

add route to a subnet - Solaris 2.6

WE are running Unix - Solaris 2.6, we create a subnet. In the windows enviroment we are able to add a static route by using route add -p 172.16.10.0 mask 255.255.255.0 172.16.17.224, but when we add the route in Solaris as route add -net 172.16.10.0 255.255.255.0 172.16.17.224, we receive an... (5 Replies)
Discussion started by: cassy
5 Replies

9. Solaris

setting a route in Solaris

I am having problems getting this to work, though it seems like it would be simple. I have a host with 2 interfaces, hme0 (192.168.0.132) for the primary interface, and hme1 (192.168.0.16) for backups. I want it to talk to the backup host, which is 192.168.0.21, across the hme1 interface. Thanks (2 Replies)
Discussion started by: 98_1LE
2 Replies

10. UNIX for Advanced & Expert Users

Route for Solaris 8

Hello Dear Friends, I'm here again I need to know where is the permanent file for gateway configuration. I did the following command route add -net 0.0.0.0 5.0.0.3 ( My Gateway), but when i restart my computer i have to do it again. What the file can i set the permanent configuration for my... (1 Reply)
Discussion started by: themask
1 Replies
Login or Register to Ask a Question