Login or Register to Ask a Question and Join Our Community


Solaris

SUN Netra 240 Boot error

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris SUN Netra 240 Boot error
# 8  
Old 08-10-2010
It probably won't be usefull but this is FYI: the error counters are reseted upon reboot / power off etc ... was your iostat -En ran before or after the fsck?
# 9  
Old 08-11-2010
Quote:
Originally Posted by plmachiavel
It probably won't be usefull but this is FYI: the error counters are reseted upon reboot / power off etc ... was your iostat -En ran before or after the fsck?
Thanks for the info about the error counters Smilie

I ran an fsck but did not run an iostat. It was a few days ago and I can't recall whether I got any errors from the fsck....almost sure I did. I'm trying to boot from the cdrom again but this too is now giving me issues! Smilie I've asked the on-site technician to check the cdrom drive for me and I'm waiting to hear from him

---------- Post updated 08-11-10 at 10:50 AM ---------- Previous update was 08-10-10 at 05:53 PM ----------

This is the result from an iostat -En:

Code:
# iostat -En
c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: SEAGATE  Product: ST373307LSUN72G  Revision: 0707 Serial No: 0503B9Z8RM 
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 Predictive Failure Analysis: 0 
c1t1d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: SEAGATE  Product: ST373307LSUN72G  Revision: 0707 Serial No: 0503B9Z8H8 
Size: 73.40GB <73400057856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 0 Predictive Failure Analysis: 1 
c0t0d0           Soft Errors: 4 Hard Errors: 0 Transport Errors: 1 
Vendor: TEAC     Product: DV-28E-C         Revision: 1.4B Serial No:  
Size: 0.67GB <671088640 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 4 Predictive Failure Analysis: 0 
c2t233100015D068B00d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0 
Vendor: SUN      Product: SE6920           Revision: 0202 Serial No:  
Size: 53.68GB <53678702592 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 
Illegal Request: 1 Predictive Failure Analysis: 0 
rmt/0            Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 
Vendor: HP       Product: Ultrium 3-SCSI   Revision: L63S Serial No:

# 10  
Old 08-13-2010
Just an update..
I just tried an upgrade install again after fixing those disk errors with fsck. Upgrade ran through successfully. System rebooted but came up with the same error :-(
Code:
Upgrade complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
 
 
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
 
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
 
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
 
 
Launching installer. Please Wait...
 
 
 
Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|
 
   Pausing for 30 seconds at the "Summary" screen. The wizard will continue to
   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
   continue. [c] c
 
 
   Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to
   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
   continue. [c] c
 
Creating boot_archive for /a
updating /a/platform/sun4u/boot_archive
15+0 records in
15+0 records out
syncing file systems... done
rebooting...
Probing system devices
Probing memory
ChassisSerialNumber TN10150508 
Probing I/O buses
 
Sun Fire V240, No Keyboard
Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.22.33, 4096 MB memory installed, Serial #xxxx
Ethernet address xxxx, Host ID: xxxx
 
 
 
Rebooting with command: boot                                          
Boot device: disk  File and args: 
Boot load failed.
The file just loaded does not appear to be executable.

Where to now? Do I try it again and specify a different slice to boot from when I do the upgrade? How would I go about breaking the mirror?
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about... (5 Replies)
Discussion started by: solaris_1977
5 Replies

2. Solaris

SUn Netra X4200 M2 Drivers

Hi Guys, Could someone please share the dvd/cd that came with server Netra x4200 M2 since it is not more available in Oracle site? Or do you know where I can get that? Thanks! (4 Replies)
Discussion started by: CristianS
4 Replies

3. Solaris

Fsck: alignment error Solaris 8, SUN Netra AX11505

Hello all, I recently powered on my Netra AX1105 server only to be greeted with the following error message. I am not sure what to do here, I cant fun fsck on OK prompt.. did ok>boot -r and now it keeps booting from net, then I run ok>boot disk then outputs the following message... and keeps... (3 Replies)
Discussion started by: br1an
3 Replies

4. Hardware

POST displays error sparc netra 240

Hi guys, when I power on my sun netra 240 server, it displays these error messages: 1. Notice: cpu 0 has 2048/2048 MB of memory disabled. 2. Error : The following devices are disabled dimm1. Please can anyone be kind enough to explain this for me? Thanks (2 Replies)
Discussion started by: cjashu
2 Replies

5. Solaris

Unable to access serial port from non-global solaris zone on netra 240

I am trying to use a serial communications device that is connected to /dev/ttyb on a netra 240 server. This is a solaris zone configuration using solaris 10 0910. I am able to access /dev/ttyb from the global zone but not throught he non-global zone. I have enabled all of the tty devices in my... (0 Replies)
Discussion started by: disagreeable
0 Replies

6. UNIX for Dummies Questions & Answers

Refurbished Netra 240 servers hangs after POST test

Hello everyone, I'm extremely new when it comes to SUN servers so bear with me and hopefully I can describe the issue I have accurately. At work we just received a refurbished SUN Netra 240 server. I was told to change some of the EEprom settings, and to do that I was to use a... (0 Replies)
Discussion started by: afferbwt
0 Replies

7. Solaris

netra 240 difference

Hi, sunfire v240 and netra 240 are looks similar. system board, memory and processors are similar, then why netra 240 called as telco server? can anyone tell the difference. RJS (1 Reply)
Discussion started by: rajasekg
1 Replies

8. Solaris

sun netra t1

so i've grabbed this sun netra t1 for some small dev work. now obviously i need to install sol10. no problem done it a million times except for the fact that i've never actually done it w/o a term server. so i grab a usb to serial and a serial to rj45 (the one you get in every cisco order.. roll... (24 Replies)
Discussion started by: pupp
24 Replies

9. Solaris

Netra 240 Hard disk are not detected

Hi All, I have new Netra 240 box which is not detecting its harddisk equiped with itse same har disk are detected when I swap with another machine. Same time If I swap hardisk of other machine to this Netra 240 box, also do not work. I have checked chassis, cabling etc and all looks fine. ... (1 Reply)
Discussion started by: xpwistler
1 Replies
Login or Register to Ask a Question