Login or Register to Ask a Question and Join Our Community


Solaris

errors on Netra-440: "IPC Warning: ipc: tcp_protocol: bad magic number"

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris errors on Netra-440: "IPC Warning: ipc: tcp_protocol: bad magic number"
# 1  
Old 03-25-2010
MySQL errors on Netra-440: "IPC Warning: ipc: tcp_protocol: bad magic number"
I was asked to look into a problem with a Sun Netra 440 in another department. On the server in question, the relevant 'uname -a' information is, "SunOS host1 5.9 Generic_118558-16 sun4u sparc SUNW,Netra-440". That information aside, while the other admin is logged into the ALOM, these errors are scrolling steadily across the console:

IPC Warning: ipc: tcp_protocol: bad magic number
IPC Warning: ipc: tcp_protocol: bad magic number
IPC Warning: ipc: tcp_protocol: bad magic number
IPC Warning: ipc: tcp_protocol: bad magic number
IPC Warning: ipc: tcp_protocol: bad magic number
IPC Warning: ipc: tcp_protocol: bad magic number


I have not seen "bad magic number" messages associated with "ipc: tcp_protocol" before. Has anyone encountered and/or fixed such errors before or can anyone direct me to documentation describing IPC Warning messages on the ALOM level?

Thanks in advance for any assistance with this.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Bash script - Print an ascii file using specific font "Latin Modern Mono 12" "regular" "9"

Hello. System : opensuse leap 42.3 I have a bash script that build a text file. I would like the last command doing : print_cmd -o page-left=43 -o page-right=22 -o page-top=28 -o page-bottom=43 -o font=LatinModernMono12:regular:9 some_file.txt where : print_cmd ::= some printing... (1 Reply)
Discussion started by: jcdole
1 Replies

2. AIX

How to Load a CICS IPC Kernel Extension in a versioned "rootvg" WPAR ?

Anyone running CICS TX in a WPAR ? In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue). Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
Discussion started by: The Doctor
4 Replies

3. Solaris

Netra X1 LOM: Unable to change any variable via the "set" command

I'm posting here as it didn't seem quite right in the hardware section (as it's LOM commands). My apologies if I have that wrong though :) I've finally gotten round to configuring the LOM on my Netra X1, but I can't get it to change the hostname via the "set" command: lom>show hostname... (2 Replies)
Discussion started by: Smiling Dragon
2 Replies

4. Shell Programming and Scripting

awk command to replace ";" with "|" and ""|" at diferent places in line of file

Hi, I have line in input file as below: 3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL My expected output for line in the file must be : "1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL" Can someone... (7 Replies)
Discussion started by: shis100
7 Replies

5. Solaris

part number for netra 440 dvd w

Hi i am accessing the server remotly. i want to replace bad dvd writer. how do i know the part number of the dvd drive for raising a spare. thanks (3 Replies)
Discussion started by: sunnybee
3 Replies

6. AIX

"too big" and "not enough memory" errors in shell script

Hi, This is odd, however here goes. There are several shell scripts that run in our production environment AIX 595 LPAR m/c, which has sufficient memory 14GB (physical memory) and horsepower 5CPUs. However from time to time we get the following errors in these shell scripts. The time when these... (11 Replies)
Discussion started by: jerardfjay
11 Replies

7. Shell Programming and Scripting

read -p "prompt text" foo say "read: bad option(s)" in Bourne-Shell

Hallo, i need a Prompting read in my script: read -p "Enter your command: " command But i always get this Error: -p: is not an identifier When I run these in c-shell i get this error /usr/bin/read: read: bad option(s) How can I use a Prompt in the read command? (9 Replies)
Discussion started by: wiseguy
9 Replies

8. Filesystems, Disks and Memory

Bad Magic Number

Dear All, i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Discussion started by: wesweshahaha
0 Replies

9. Shell Programming and Scripting

"bad number" message

Hi, running a script fine , i get twice the following message and whether i put "set -x" , i don't see what's going wrong : /users/notes01/scripts/sad/util/verif_boot_notes.ksh: Ma: bad number any ideas ? regards Christian (4 Replies)
Discussion started by: Nicol
4 Replies

10. Solaris

Big UH-OH "Bad magic number in disk label"

I tried rebooting my Sun server just a few minutes ago and I got the following at boot: -- Sun Fire 280R (UltraSPARC-III+) , No Keyboard Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx Ethernet address... (6 Replies)
Discussion started by: deckard
6 Replies
Login or Register to Ask a Question

LEARN ABOUT OPENSOLARIS

ctsmc

ctsmc(7D)							      Devices								 ctsmc(7D)

NAME

       ctsmc - System Management  Controller driver

DESCRIPTION

       The  ctsmc  system  management controller driver is a multithreaded, loadable, clonable STREAMS hardware driver that supports communication
       with the system management controller device on SUNW,NetraCT-410, SUNW,NetraCT-810 and SUNW,Netra-CP2300 platforms.

       The smc device provides a Keyboard Controller  Style (KCS) interface as described in the Intelligent  Platform Management Interface  (IPMI)
       Version 1.5 specification. The ctsmc driver enables user-land and  kernel-land clients to access services provided by smc hardware.

FILES

       /dev/ctsmc

	   ctsmc special character device

       /platform/sun4u/kernel/drv/sparcv9/ctsmc

	   64 bit ELF kernel driver

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |SPARC			   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcar.u 		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       attributes(5)

       STREAMS Programmers Guide

       Writing Device Drivers

       Intelligent Platform Management Interface (IPMI). Version 1.5 - PICMIG, February, 2001

SunOS 5.11							    7 Dec 2003								 ctsmc(7D)