10 More Discussions You Might Find Interesting
1. Hardware
Can you mix DIMMs in a T6320 (sparc) blade? I have read/heard that the DIMMs in a memory bay must be identical but can you have different size DIMMs installed in the blade?
For instance, can you have 1 4GB DIMM in bay 0, 2 2GB DIMMs in bay 1, 4 1 GB DIMMs in bay 2 and 2 2GB DIMMs in bay 3 for a... (0 Replies)
Discussion started by: bluescreen
0 Replies
2. Solaris
Hi, I can't seem to get Graphs using Report Manager for Memory and Hard Disk. Only CPU is working fine. Following are some screen shots:
- Sun Management Center 4.0
http://img689.imageshack.us/img689/7555/smcu.jpg
- Performance Report
http://img25.imageshack.us/img25/3015/reportdo.jpg
By... (2 Replies)
Discussion started by: Mack1982
2 Replies
3. Solaris
Hi folks, can you please help to print cpu and memory configuration on sun host. (4 Replies)
Discussion started by: ggolub
4 Replies
4. Solaris
Hi,
I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are... (3 Replies)
Discussion started by: skinyana
3 Replies
5. Solaris
Hi, this is my 1st post here, I don't know is it proper or not for the question I have, but I may try ask anyway, since it is question about sun's hw/sw issue...
I have my blade 1000 installed additional memory kits, it was originally 2G memory installed on Group0(Bank 0/2) Dimm slots, I got... (5 Replies)
Discussion started by: netshu
5 Replies
6. Solaris
Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has... (12 Replies)
Discussion started by: BrewDudeBob
12 Replies
7. Solaris
Hi
I am facing a problem with memory in SunOS 5.9. I just want to check the memory usage. Can anybody suggest me a command that will help me in this regard. (4 Replies)
Discussion started by: rajarsi.ghosh
4 Replies
8. Programming
Hi, I try to marshal a unsigned int and a char * into a buffer, and then unmarshal them later to get them out. I need to put the char * in the front and unsigned int at the end of the buffer. However, my system always give me "BUS ERROR". I am using Sun Sparcs Sloris 2.10.
My code to marshal... (6 Replies)
Discussion started by: nj302
6 Replies
9. Solaris
Hi, I try to marshal a unsigned int and a char * into a buffer, and then unmarshal them later to get them out. I need to put the char * in the front and unsigned int at the end of the buffer. However, my system always give me "BUS ERROR". I am using Sun Sparcs Sloris 2.10.
My code to marshal the... (1 Reply)
Discussion started by: nj302
1 Replies
10. UNIX for Dummies Questions & Answers
I would like to upgrade the memory in my Sun Blade 150 workstation. In reading through Sun's Blade 150 DIMM Installation Guide, it indicates that the memory must be "certified by Sun for the Sun Blade 150 system."
Does anyone know if any SDRAM, PC133 • CL=2 • Unbuffered • ECC • 133MHz • 3.3V ... (2 Replies)
Discussion started by: here2learn
2 Replies
STRUCT
STATION_PARAM(9) Actions and configuration STRUCT STATION_PARAM(9)
NAME
struct_station_parameters - station parameters
SYNOPSIS
struct station_parameters {
const u8 * supported_rates;
struct net_device * vlan;
u32 sta_flags_mask;
u32 sta_flags_set;
u32 sta_modify_mask;
int listen_interval;
u16 aid;
u8 supported_rates_len;
u8 plink_action;
u8 plink_state;
const struct ieee80211_ht_cap * ht_capa;
const struct ieee80211_vht_cap * vht_capa;
u8 uapsd_queues;
u8 max_sp;
enum nl80211_mesh_power_mode local_pm;
u16 capability;
const u8 * ext_capab;
u8 ext_capab_len;
};
MEMBERS
supported_rates
supported rates in IEEE 802.11 format (or NULL for no change)
vlan
vlan interface station should belong to
sta_flags_mask
station flags that changed (bitmask of BIT(NL80211_STA_FLAG_...))
sta_flags_set
station flags values (bitmask of BIT(NL80211_STA_FLAG_...))
sta_modify_mask
bitmap indicating which parameters changed (for those that don't have a natural "no change" value), see enum
station_parameters_apply_mask
listen_interval
listen interval or -1 for no change
aid
AID or zero for no change
supported_rates_len
number of supported rates
plink_action
plink action to take
plink_state
set the peer link state for a station
ht_capa
HT capabilities of station
vht_capa
VHT capabilities of station
uapsd_queues
bitmap of queues configured for uapsd. same format as the AC bitmap in the QoS info field
max_sp
max Service Period. same format as the MAX_SP in the QoS info field (but already shifted down)
local_pm
local link-specific mesh power save mode (no change when set to unknown)
capability
station capability
ext_capab
extended capabilities of the station
ext_capab_len
number of extended capabilities
DESCRIPTION
Used to change and create a new station.
AUTHOR
Johannes Berg <johannes@sipsolutions.net>
Author.
COPYRIGHT
Kernel Hackers Manual 3.10 June 2014 STRUCT STATION_PARAM(9)