SUN station memory problem

10 More Discussions You Might Find Interesting

1. Hardware

Sun Blade T6320 memory configuration

Can you mix DIMMs in a T6320 (sparc) blade? I have read/heard that the DIMMs in a memory bay must be identical but can you have different size DIMMs installed in the blade? For instance, can you have 1 4GB DIMM in bay 0, 2 2GB DIMMs in bay 1, 4 1 GB DIMMs in bay 2 and 2 2GB DIMMs in bay 3 for a...

2. Solaris

Sun MC, Display memory Statistics Graph

Hi, I can't seem to get Graphs using Report Manager for Memory and Hard Disk. Only CPU is working fine. Following are some screen shots: - Sun Management Center 4.0 http://img689.imageshack.us/img689/7555/smcu.jpg - Performance Report http://img25.imageshack.us/img25/3015/reportdo.jpg By...

3. Solaris

how to get cpu and memory configuration on sun

Hi folks, can you please help to print cpu and memory configuration on sun host.

4. Solaris

Sun Fire v120 memory compatibility

Hi, I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are...

5. Solaris

adding memory to sun blade server ...

Hi, this is my 1st post here, I don't know is it proper or not for the question I have, but I may try ask anyway, since it is question about sun's hw/sw issue... I have my blade 1000 installed additional memory kits, it was originally 2G memory installed on Group0(Bank 0/2) Dimm slots, I got...

6. Solaris

Sun Blade 100 Memory Upgrade

Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has...

7. Solaris

Memory Check in SUN Solaris

Hi I am facing a problem with memory in SunOS 5.9. I just want to check the memory usage. Can anybody suggest me a command that will help me in this regard.

8. Programming

how to round up a memory address(memory alignment problem)

Hi, I try to marshal a unsigned int and a char * into a buffer, and then unmarshal them later to get them out. I need to put the char * in the front and unsigned int at the end of the buffer. However, my system always give me "BUS ERROR". I am using Sun Sparcs Sloris 2.10. My code to marshal...

9. Solaris

Memory Alignment Problem on Sun Sparcs

10. UNIX for Dummies Questions & Answers

Memory upgrade Sun Blade 150

I would like to upgrade the memory in my Sun Blade 150 workstation. In reading through Sun's Blade 150 DIMM Installation Guide, it indicates that the memory must be "certified by Sun for the Sun Blade 150 system." Does anyone know if any SDRAM, PC133 � CL=2 � Unbuffered � ECC � 133MHz � 3.3V ...

LEARN ABOUT HPUX

aserver

aserver(1M)															       aserver(1M)

NAME

       Aserver - start the audio server

SYNOPSIS

DESCRIPTION

       The command starts the HP-UX Audio server, which can run on a system with audio hardware.  See Audio(5) for information about which systems
       have audio hardware.  The option forces the starting of the Audio server; this option is only needed if the Aserver has problems starting.

   The Audio Server
       Before using any audio tools such as the the system or X station must be running two audio server processes, called On a  Series  700,  the
       Remote Procedure Call daemon must also be running.

       Normally,  the  Aserver	processes and start automatically when the system is booted.  If problems occur on an ENTRIA or ENVIZEX X station,
       see the X station owner's manual.  On a Series 700 Audio hardware, first check if is running. Type the following:

       If it is running, you see a line similar to the following.

       If it is not running, see HP 9000/DCE documentation for information on restarting it.  If is running, verify that the Aserver  is  running.
       Type:

       If the Aserver is running you will see lines similar to the following, which indicate the presence of the two Aserver processes:

       If it is not running, become root and restart it as follows:

       If it fails to start, reissue the command with the option:

   Using Audio over the Network
       From  a	workstation,  you can also use the Audio Editor and Control Panel over the network. However, the remote system is where the actual
       playback and recording occur.

       The local workstation (or audio client) can be any Series 700 system.  The remote system (or audio server) can be a Series 700 or an X sta-
       tion  with  audio  hardware  and  must  have the Aserver processes running.  If the server is a workstation, it must also allow access from
       remote clients (see asecure(1M)) and must have running.

       To make the system an audio client, set the variable by modifying the file as follows:

	      Korn and POSIX Shells:

	      C Shell:

       For system_name, identify the workstation or X Station running the Aserver.

       If the variable is not set, the Audio Library attempts to use to the Aserver on the system defined by the variable.  If neither nor is set,
       the Aserver on the local machine is used.

DEPENDENCIES

       The Audio Server must run on a system that has audio hardware.  Note that HP-UX for the 8MB 705 System does not include audio software.

AUTHOR

       The Audio Server was developed by HP.

SEE ALSO

       audio(5), asecure(1M), attributes(1), convert(1), send_sound(1).

																       aserver(1M)

Solaris