SUN station memory problem

10 More Discussions You Might Find Interesting

1. Hardware

Sun Blade T6320 memory configuration

Can you mix DIMMs in a T6320 (sparc) blade? I have read/heard that the DIMMs in a memory bay must be identical but can you have different size DIMMs installed in the blade? For instance, can you have 1 4GB DIMM in bay 0, 2 2GB DIMMs in bay 1, 4 1 GB DIMMs in bay 2 and 2 2GB DIMMs in bay 3 for a...

2. Solaris

Sun MC, Display memory Statistics Graph

Hi, I can't seem to get Graphs using Report Manager for Memory and Hard Disk. Only CPU is working fine. Following are some screen shots: - Sun Management Center 4.0 http://img689.imageshack.us/img689/7555/smcu.jpg - Performance Report http://img25.imageshack.us/img25/3015/reportdo.jpg By...

3. Solaris

how to get cpu and memory configuration on sun

Hi folks, can you please help to print cpu and memory configuration on sun host.

4. Solaris

Sun Fire v120 memory compatibility

Hi, I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are...

5. Solaris

adding memory to sun blade server ...

Hi, this is my 1st post here, I don't know is it proper or not for the question I have, but I may try ask anyway, since it is question about sun's hw/sw issue... I have my blade 1000 installed additional memory kits, it was originally 2G memory installed on Group0(Bank 0/2) Dimm slots, I got...

6. Solaris

Sun Blade 100 Memory Upgrade

Hi, I've been a member for a while but have never posted. I have a Sun Blade 100 desktop and I just installed Solaris 10 and it is unbearably slow. I only have 128 Meg of RAM and need to upgrade. I have searched and found many online resources that have RAM, but I was wondering if anyone has...

7. Solaris

Memory Check in SUN Solaris

Hi I am facing a problem with memory in SunOS 5.9. I just want to check the memory usage. Can anybody suggest me a command that will help me in this regard.

8. Programming

how to round up a memory address(memory alignment problem)

Hi, I try to marshal a unsigned int and a char * into a buffer, and then unmarshal them later to get them out. I need to put the char * in the front and unsigned int at the end of the buffer. However, my system always give me "BUS ERROR". I am using Sun Sparcs Sloris 2.10. My code to marshal...

9. Solaris

Memory Alignment Problem on Sun Sparcs

10. UNIX for Dummies Questions & Answers

Memory upgrade Sun Blade 150

I would like to upgrade the memory in my Sun Blade 150 workstation. In reading through Sun's Blade 150 DIMM Installation Guide, it indicates that the memory must be "certified by Sun for the Sun Blade 150 system." Does anyone know if any SDRAM, PC133 � CL=2 � Unbuffered � ECC � 133MHz � 3.3V ...

LEARN ABOUT DEBIAN

extend

extend(1)						      General Commands Manual							 extend(1)

NAME

       extend -- produce an extended elevation from a .3d file

SYNOPSIS

       extend [--specfile configuration .espec file]   input .3d file [output .3d file]

Description
	      Note:

	      The extend program can also work on Compass .plt (as can aven and any other Survex program which reads .3d files).

       If  no  specfile  is  given,  extend  starts  with  the highest station marked as an entrance which has at least one underground survey leg
       attached to it.	If there are no such stations, the highest deadend station in the survey (or the highest station if there are no deadends)
       is used.  Extend puts the first station on the left, then folds each leg out individually to the right, breaking loops arbitrarily (usually
       at junctions).

       If the output filename is not specified, extend bases the output filename on the input filename, but  ending  "_extend.3d".   For  example,
       extend deep_pit.3d produces an extended elevation called deep_pit_extend.3d.

       This approach suffices for simple caves or sections of cave, but for more complicated situations human intervention is required.  More com-
       plex sections of cave can be handled with a specfile giving directions to switch the direction of extension  between  left  and	right,	to
       explicitly specify the start station, or to break the extension at particular stations or legs.

       The specfile is in a format similar to cavern's data format:

       ;This is a comment

       ; start the elevation at station entrance.a
       *start entrance.a  ;this is a comment after a command

       ; start extending leftwards from station half-way-down.5
       *eleft half-way-down.5

       ; change direction of extension at further-down.8
       *eswap further-down.8

       ; extend right from further-down.junction, but only for
       ; the leg joining it to very-deep.1, other legs continuing
       ; as before
       *eright further-down.junction  very-deep.1

       ; break the survey at station side-loop.4
       *break side-loop.4

       ; break survey at station side-loop.junction but only
       ; for leg going to complex-loop.2
       *break side-loop.junction complex-loop.2

       This  approach  requires  some  trial  and  error, but gives useful results for many caves.  The most complex systems would benefit from an
       interactive interface to select and view the breaks and switches of direction.

See Also
       3dtopos(1), aven(1), cad3d(1), cavern(1), diffpos(1), sorterr(1), svxedit(1)

																	 extend(1)

Solaris