Hi all.
This may be a stupid question but here goes:
I lost a disk on my Sun-Fire 480-r and want to replace it. I don't care about the data, I just need to get a new disk in.
Can anyone supply me with step by step procedure please. I am not an expert by any means and it is a dev box so I figured I would try before calling in SUN.
system info:
Code:
# uname -a
SunOS rcworarpt 5.9 Generic_112233-07 sun4u sparc SUNW,Sun-Fire-480R
We are using mirroring.
metastat output is as follows:
Code:
# metastat
d4: Mirror
Submirror 0: d14
State: Needs maintenance
Submirror 1: d24
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 286169472 blocks (136 GB)
d14: Submirror of d4
State: Needs maintenance
Invoke: metareplace d4 c2t11d0s6 <new device>
Size: 286169472 blocks (136 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c2t11d0s6 0 No Maintenance Yes
d24: Submirror of d4
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace d4 c3t11d0s6 <new device>
Size: 286169472 blocks (136 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c3t11d0s6 0 No Last Erred Yes
d3: Mirror
Submirror 0: d13
State: Needs maintenance
Submirror 1: d23
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 430017408 blocks (205 GB)
d13: Submirror of d3
State: Needs maintenance
Invoke: metareplace d3 c2t8d0s0 <new device>
Size: 430017408 blocks (205 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase State Reloc Hot Spare
c2t8d0s0 0 No Maintenance Yes
c2t9d0s0 10176 No Maintenance Yes
c2t10d0s0 10176 No Maintenance Yes
d23: Submirror of d3
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace d3 c3t8d0s0 <new device>
Size: 430017408 blocks (205 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase State Reloc Hot Spare
c3t8d0s0 0 No Last Erred Yes
c3t13d0s0 10176 No Last Erred Yes
c3t10d0s0 10176 No Last Erred Yes
Device Relocation Information:
Device Reloc Device ID
c3t11d0 Yes id1,sd@SFUJITSU_MAW3147NCSUN146G000704C0ANVR____DAC0P710ANVR
c2t11d0 Yes id1,sd@SFUJITSU_MAW3147NCSUN146G000703C0ALDG____DAC0P710ALDG
c3t8d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ68F2S00007416TZS2
c3t13d0 Yes id1,sd@SFUJITSU_MAW3073NCSUN72G_000806B0PRAS____DAN0P820PRAS
c3t10d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ10FP200007337K0ES
c2t8d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ1279H000073384J6U
c2t9d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ101B100007337JKGR
c2t10d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ10FEG000073386DB6
Here is what was reported from /var/adm/messages at the time we lost the disk:
Code:
Jan 23 14:19:52 rcworarpt scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@5/sd@a,0 (sd25):
Jan 23 14:19:52 rcworarpt SCSI transport failed: reason 'incomplete': retrying command
Jan 23 14:19:53 rcworarpt scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@5/sd@a,0 (sd25):
Jan 23 14:19:53 rcworarpt disk not responding to selection
Jan 23 14:19:53 rcworarpt md_stripe: [ID 641072 kern.warning] WARNING: md: d23: write error on /dev/dsk/c3t10d0s0
Jan 23 14:19:55 rcworarpt scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/pci@1/scsi@5/sd@a,0 (sd25):
Jan 23 14:19:55 rcworarpt disk not responding to selection
FYI,
I'm slowly removing a lot of the bold font-styles from titles of discussions, forum titles, etc
I'm not removing bold for the entire site because we do need bold from time to time, especially in posts and sometimes in other places.
However, the original forum style had way too much... (3 Replies)
Hi Guys,
does anyone know of a step by step guide on how configure apache2 web server in solaris 10?
I will really appreciate it.
Thanks a lot (1 Reply)
Thank all of you.
May you explain step by step where and how I will add pseudo code
Note : I have Linux 2.6.24-26-server on x86_64
dears kindly help me (3 Replies)
Hello all
i was searching the net for simple but effective tutorial to show me how debug c++ in emacs with not much luck.
im not new to unix but new to emacs , i looking for tutorial that
shows how to debug ( if possible ) c++ programs .
LIike IDE suppose to , break points step in/out variable... (0 Replies)
Hi all,
The following script is fine when I work via command line
m=1
c=0
while
do
echo $m
gnokii --getsms IN $m > out.txt;
m=`expr $m + 1`;
cat out.txt >> message_log;
############
read first crap< <(sed -n '/Text:/{n;p;}' out.txt);
read message< <(sed -n '/Text:/{n;p;}'... (2 Replies)
I am new to unix and server at my job crashed due to hardware problem. I'm now opted to install sco unix on a new server - could anybody help me with the steps I need to take (pretty old machine)
Thanks & Regards
Nancy :( (0 Replies)
HI
I am new to unix and need to install sco unix on a new server - could anybody help me with the steps I need to take - the hd is a 9gb scsi drive (pretty old machine)
Thanks (1 Reply)