After the initial solaris installation server failed to boot:
So I ve decided to go with:
It was fine with booting like this! I was a little bit short on time So I couldn't fix it permanently and had to go with the workaround.
Later on when I checked the installation logs:
What I understand is, I need to change the boot device or auto-boot.
System is running on a live environment now so I have to fix this without interrupting the server.
So with current conditions server will fail to boot If anything goes wrong and If server needs to restart.
My question is, what should I do to prevent this? and what is the safest way to do it without restarting server?
Hi all,
I've got a Sun ultra 30 workstation. the Nvram battery died so I replaced it. I reprogrammed the mac address using the mlpl command all that so it booted without error. But for some reason I was trying to boot via the network. So I did a STOP A and boot disk1 which is the alias for my SCSI... (2 Replies)
I have a T2000 enterprise SPARC server that's no longer on contract with Oracle. It's on old firmware (6.3.x). After a power-down this weekend, it won't boot normally. Boot snapshot at the bottom of the post.
It can boot to cdrom, and it'll boot to failsafe mode, but it won't do a regular... (9 Replies)
Hi folks,
I was patching Sun server (SunOS suns121 5.10 Generic_144488-17 sun4v sparc SUNW,Sun-Fire-T200) with the lateset bundle. It was completed with no errors. Server was restarted with shutdown command
(/usr/sbin/shutdown -y -i6 -g0) after patching was complete. However, after that,... (3 Replies)
Hi all!
I have a Sun JavaStation-1 which doesn't boot: when I turn on the power switch, the power led becomes lit but the screen remains black (going in power save after about 5 seconds). :eek:
Now my question is: could be this problem due to a dead IDPROM? :confused:
I have this doubt because... (0 Replies)
hello
i have a sun server V890 and it stops booting after adding 2 CPUs modules and gives me the following error message:
Enabling system bus....... Done
Initializing CPUs......... Done
Initializing boot memory..
RAM-Copy CRC failure!Can't start: No image found
FATAL: Can't find/decompress... (0 Replies)
This may be a stupid question, but I don't want to take any chances.
I have a Sun T2000 in production. I want to run the "resetsc" command on the ALOM controller to active an IP address change. Will resetting ALOM affect the running OS?
Thanks (2 Replies)
Newbie question.
I've been running OpenSolaris on an Intel box for some time with great success.
I have just bought an old Sun Blade workstation with a corrupted version of Solaris 5 something on it.
The plan was to install OpenSolaris on it.
However beyond my skills, I see, as no Live CD (or... (10 Replies)
Hi Guyz,
I recently downloaded sol-10-u6-ga1-sparc-dvd.iso from Sun. I burned the disk as cd .iso.
When trying to boot at the ok> boot cdrom
i get the following error:
-----------------------------------------------------------------------
Boot device:... (2 Replies)
Hello everybody,
I installed sun solaris i86 , the programme installation install the
"Mini Root" and after that he doing shutdown.
the camputer coming up and he can't boot.
how i can to resuled this problem ???
Thenk you in advence..... (2 Replies)