Migrating non DID device in a metaset to DID device

5 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Command to see the logical volume path, device mapper path and its corresponding dm device path

Currently I am using this laborious command lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}' Would like to know if there is any shorter method to get this mapping of...

2. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

3. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

4. Boot Loaders

Reboot and Select Proper Boot device or insert Boot media in select Boot device and press a key

Hello, I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error " reboot and select proper Boot device or insert Boot media in select Boot device and press a key " I have tried CD and...

5. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

LEARN ABOUT DEBIAN

mkqdisk

mkqdisk(8)						      Quorum Disk Management							mkqdisk(8)

NAME

       mkqdisk - Cluster Quorum Disk Utility

WARNING

       Use of this command can cause the cluster to malfunction.

SYNOPSIS

       mkqdisk [-?|-h] | [-L] | [-f label] [-c device  -l label] [-d [-d ...]]

DESCRIPTION

       The mkqdisk command is used to create a new quorum disk or display existing quorum disks accessible from a given cluster node.

OPTIONS

       -c device -l label
	      Initialize  a new cluster quorum disk.  This will destroy all data on the given device.  If a cluster is currently using that device
	      as a quorum disk, the entire cluster will malfunction.  Do not run this on an active cluster  when  qdiskd  is  running.	 Only  one
	      device  on  the  SAN should ever have the given label; using multiple different devices is currently not supported (it is expected a
	      RAID array is used for quorum disk redundancy).  The label can be any textual string up to 127 characters - and is therefore  enough
	      space to hold a UUID created with uuidgen(1).

       -f label
	      Find the cluster quorum disk with the given label and display information about it.

       -L     Display information on all accessible cluster quorum disks.

       -d     Increase debugging level.  Specify multiple times for more information.  Currently, specifying more than twice has no effect.

SEE ALSO

       qdisk(5), qdiskd(8), uuidgen(1)

								     July 2006								mkqdisk(8)

Solaris