Thanks for ur time n reply...
it means my HDD is not detected by system..?
i have changed my HDD to for this reason already....
will check another HDD again,as u suggested..
thanks...
plz check if any other solution is available or not..?
Check is cdrom is set to any device or not with the help of devalias. What you can do in this case for test is run probe-ide or probe-scsi and sees if you can. Other thing you can do is instead of writing “boot cdrom -s” may be you can replace the “cdrom” with full physical path.
i tried solaris 8 n 9 CD too for this thing..
still having same issue ..
i am not getting..?
**************************
Bad Magic number in disk label
**************************
what it tries to detect CD ROM or Disk? as i have changed my HDD too..which is detected by system too....
curios....as i have tried boot cdrom -s option tooo..but failed...
small thing have stopped me from my SUN practice with SPARC arch..
This is first time post...found this forum when looking for possible solution to fix my sun pc. Just one day can't boot it already showing the following:
Boot device: disk File args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot
Can't open boot device... (40 Replies)
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
Hi,
i got the following error while unpacking the archive file.
cpio -icvd < as_sun_x86_101202_disk2.cpio
Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles/wwdoc.jar
Disk2/stage/Components/oracle.webdb.wwdoc/10.1.2.0.1/1/DataFiles... (2 Replies)
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)