Login or Register to Ask a Question and Join Our Community


Solaris

Solaris 10 SCSI card question

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Solaris 10 SCSI card question
# 1  
Old 11-24-2009
Solaris 10 SCSI card question
I have 2 solaris boxes and trying to connect to D1000 to do clustering. I put the U cable to see the disks from both side, but I can't see any of the disks when I use format command. How can I verify that differential card is installed and configured correctly? Thanks in advance.
# 2  
Old 11-24-2009
have you done a "reconfigure" boot or a "devfsadm" after pluging in the array?
# 3  
Old 11-24-2009
yes, it didn't bring any output. When I run format command system freeze after 30 second. How can I confirm that controller is working? I mean differential card is configured.
# 4  
Old 11-24-2009
try:

drvconfig
disks
devlinks
ucblinks
then run format command.
# 5  
Old 11-24-2009
WHats your OS? Solaris 8 , 9 , 10? whatever.. as long you do a reconfig boot, you can see
# 6  
Old 11-24-2009
is the scsi bus terminated correctly? for your scsi card have a look at the output of "prtdiag -v".
# 7  
Old 11-24-2009
Thank you guys. I'm new to this. How do I confirm that scsci card is terminated correctly. I just wanted to use for clustering purpose to see all the disks from both side.

Thanks a lot guys.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. AIX

A question about scsi termination

http://ep.yimg.com/ay/iercomputer/ibm-39j5022-ultra320-scsi-adapter-dual-channel-pci-x-fc5736-3.gif I have bought this controller. Simple and fast question: I will put on this controller a external LTO tape,which is terminated with a terminator. I have to put another terminator on PCI-controller... (1 Reply)
Discussion started by: Linusolaradm1
1 Replies

2. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

3. Solaris

Solaris, SCSI M.O Drive on x86

Hi, i'm trying to install a MO Disk Drive Sony model: SMO-f541, to read a 2.6gb Magneto Optical Disk, I install Solaris 10 in a x86 machine with these specifications: Desktop Board Intel*D946GZIS Intel core 2 duo 4300, 80ghz Ram 2038 hard disk 250 gb I have a PCI SCSI card AHA-2940UW, At the... (0 Replies)
Discussion started by: Jevivre
0 Replies

4. Solaris

Clone scsi disc solaris 8

I have a SunOS 5.8 Generic_108528-29 sun4u sparc SUNW,UltraAX-i2, i have 2 scsi disk, the first with the S.O. and the second free. I read many in the forum about this: with single user, miniroot, dd, flarcreate, ufsdump and ufsrestore. Which is the best metod? If i clone the disk with... (6 Replies)
Discussion started by: tirher
6 Replies

5. Solaris

Clonar disco solaris 8 SCSI

Hola gente, Tengo un solaris 8 instalado en una sun (sparc) v120, tengo 2 discos scsi, uno donde esta instalado el s.o. y otro libre. He leido en el foro varias formas: bootear mono usuario, con miniroot, con dd, flarcreate, ufsdump y ufsrestore. Cual es el mejor modo que... (1 Reply)
Discussion started by: tirher
1 Replies

6. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system... (2 Replies)
Discussion started by: RicardoM
2 Replies

7. UNIX for Dummies Questions & Answers

installing scsi card

i hava bought scsi card for taking backup in a 12/24 DAT DRIVE -scounix5.05 i am havaing the cd of the same contain driver files how should i install it. can anybody help me. (0 Replies)
Discussion started by: tatacoffee
0 Replies

8. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120... (3 Replies)
Discussion started by: hafizurr
3 Replies

9. UNIX for Advanced & Expert Users

SCSI Card in Solaris 8

HI, I am trying to install Symbios SCSI PCI adapter in Ultra10 but unable to configure it. Getting following errors genunix: NOTICE: glm0: fault detected in device; service still unavailable genunix: NOTICE: glm0: Symbios PCI device (1000,3) not supported. Anyone has an idea, how to resolve... (1 Reply)
Discussion started by: s_aamir
1 Replies

10. UNIX for Advanced & Expert Users

Ultra 3 scsi card

Ok guys I need all the help I can get right now. I have a Ultra 60 sun server and I can't get a ultra 3 scsi card to work in it . When I install the card the system will not boot correctly and I come up with errors that say: pcipsy0: This is block Can someone please help me. I trying to hook... (2 Replies)
Discussion started by: aojmoj
2 Replies
Login or Register to Ask a Question