/dev/rmt is empty - Trying to make Tape Drive Functional

10 More Discussions You Might Find Interesting

1. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

2. SCO

Tape Drive (/dev/rct0) donot work sometimes

Hi all, I am facing problem with my Tape drive (hp) (/dev/rct0) on SCO Unix version 6.0.0. Sometimes tar works fine but some times it doesnot work and I have to restart the server to get it work. One reboot/shutdown is OK. to solve the problem. Error is "cannot open ...

3. AIX

/dev/rmt devices are missing

Hello, I attached a tape drive to one of my partitions but i cannot find the device. I run the command lsdev|grep rmt but i dont get anything in return. When i run lsslot -c slot i can see the slot number and the device that belongs to the tape drive but i cannot find any rmt files in /dev....

4. Solaris

/dev/rmt/0mn: write protected or reserved

# mt stat HP DDS-4 DAT (Sun) tape drive: sense key(0x0)= No Additional Sense residual= 0 retries= 0 file no= 0 block no= 0 mt -f /dev/rmt/0mn erase /dev/rmt/0mn: write protected or reserved. Getting error while ufsdump .... --- Dumping / to /dev/rmt/0mn --- DUMP: Date...

5. Hardware

/dev/rmt/0mn: write protected or reserved

6. AIX

How to prevent /dev/rmt* re-assignments

Hi all, Sometimes, when I reboot my AIX server, my tape drive /dev/rmt# assignments change. This creates some tedious TSM work prior to and after a reboot of the server. Is there a way to ensure that the /dev/rmt# assignments come up the same every time? Thanks

7. Solaris

Empty /dev/rmt

Hi Guys, I a newbie in Unix environment. I need a help to detect my external SCSI tape drive. I tried with command drvconfig;devlinks;tapes.. but when I go to /dev/rmt/, the directory is still empty. I also tried with add_drv -v st but I'm getting this message # add_drv -v st exit...

8. Solaris

Command to determine Tape Drive model and make

Hi, We have some IBM LTO tape drives connect over SAN. I have the following questions :- 1) Command that can list the tape drive details like who is manufacturer, model number, make etc etc 2) I would like to know what are the key differences between IBM LTO Generation 1 and Generation...

9. Solaris

/dev/rmt empty

hi all , i have just installed solris 9 on a sun 280R ,and i have appleid the recommended patches . after the installation i have found that /dev/rmt/ directory is empty , i thought that was normal , so i attached my DDS4 external tape drive and treid : devfsadm -C devfsadm -v reboot --...

10. UNIX for Dummies Questions & Answers

/dev/rmt/0cn

Following the below info: ---------------------------------------------------------------------------------- # SYNTAX: /dev/rmt/<unit number><density> � Density: l, m, h, u/c (low, medium, high, ultra/compressed, respectively) � BSD behavior: (optional) b � no rewind: (optional) n � For...

LEARN ABOUT ULTRIX

tms

tms(4)							     Kernel Interfaces Manual							    tms(4)

Name
       tms - TMSCP magnetic tape interface

Syntax
       For UNIBUS, Q-bus:
	  controller klesiu0 at uba0
	  controller uq0 at klesiu0 csr 0174500 vector uqintr
	  tape tms0 at uq0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 3

       For VAXBI:
	  controller klesib0 at vaxbi0 node 0
	  controller uq0 at klesib0 vector uqintr
	  tape tms0 at uq0 drive 0

	  controller aie0 at vaxbi? node?
	  controller bvpssp0 at aie0 vector bvpsspintr
	  tape tms0 at bvpssp0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 0

       For VAX CI/HSC:
	  adapter ci0 at nexus?
	  adapter ci0 at vaxbi? node?
	  controller hsc0 at ci0 cinode 6
	  tape tms0 at hsc0 drive 3

Description
       Prior to Version 2.0, this device was referenced by tmscp(4).

       The  TMSCP  driver  provides  a standard tape drive interface, as described in This is a driver for any controller that adheres to the Tape
       Mass Storage Control Protocol (TMSCP).  The TMSCP controllers communicate with the host through a packet-oriented protocol termed the  Tape
       Mass  Storage  Control Protocol.  This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape
       drives).  See for further details.

Tape Support
       TK50, TK70, TF70, TU81, TU81e, TA78, TA79, TA81, RV20, TA90, TA90E, TA91

Diagnostics
       All diagnostic messages are sent to the error logger subsystem.

Files
See Also
       mtio(4), nbuf(4), MAKEDEV(8), uerf(8), tapex(8)
       Guide to the Error Logger

																	    tms(4)

Solaris