Solaris10 x86 - How to find out the CPU model and speed?
Please let me know if there is any way I can find out (either via command line or SMF) the following:
1.CPU model (eg. Pentium 4,Celeron)
2.CPU speed (eg. 1GHz)
for this I could get the output through psrinfo -v, but still is there any other way?
3.Hard disk model (eg. Seagate).
When I type iostat -En it is not giving me any message.
4.Hard disk size.
your path might not be set. btw are you the root user?
Try this :
/usr/platform/`uname -i`/sbin/prtdiag -v
for HDD model, choose inquiry and for HDD size, choose verify under "format" utility
#/usr/sbin/format
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format>
hi, incredible..
Thanks a lot for your response.
1.I operate with root user account.
2.I tried with the full path of prtdiag -v, it gives the same error as I mentioned earlier.
3.I am using Solaris 10 x86. There is no option as inquiry in my format utility.
4. I have another machine Sun Sparc in which all these works..!!
thanks again. Pls let me know if any other alternative..
Hi, I would find out for you. But seems like you're not running your OS on a SUN system? Is it true? If you're running on your IBM,DELL notebook etc, I doubt these will work. Anyway will try to find out. So where is your OS run? H/W model I mean..
Have you gone thru the HCLs, ? http://www.sun.com/bigadmin/hcl/devicelist/
---------- Post updated at 02:59 PM ---------- Previous update was at 02:48 PM ----------
What I can think of for now is to check the H/W specs from the BIOS or see the messages in the dmesg output.
Hi all,
Installed Solaris10(1/13) on a normal Lenovo Thinkcenter desktop. The installation could proceed only in text mode (4).
Install is success, but not able to get the login window after the grub screen. The screen goes blank. (as was the case when selecting desktop mode during... (7 Replies)
I can't mount flash drives and dvd drives on my x86 solaris 10.
The error message appears after login; sd_media_watch_cb: dev gone.
When I issue #mount /usb, it first shows disk is mounted or busy, and
'/dev/dsk/c3t0d0p1 - there is no such device or address' when I repeat
it. But the... (5 Replies)
Dear All
I am using Core2Duo processor on G31 chipset motherboard
with 1 Gb RAM and 20 GB IDE HDD.
I tried to install Solaris 10 from DVD and it installs Successfully without any error. after the first reboot it stop at GRUB prompt.
I tried to many times with different partitions layout,... (9 Replies)
Hi All,
Anyone has configured a Sunix Sata S150 card (AKA Initio Inic-1622) + disk in a Solaris10/x86 05/09 system? I wondered what to do to get it running. The Sunix card does not come with a Solaris driver ;-(
The card is seen by the system as the prtconf -v output shows (see below at the... (0 Replies)
Need to find CPU Speed of zLinux.
The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results.
/usr/bin/cpufreq-info prints the
....
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq... (1 Reply)
Need to find the CPU speed of HP UX for a non root login.
echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users
ERROR: cannot open `/dev/mem', errno = 13, Permission denied (2 Replies)
I have a 1TB hard disk that I had partitioned on a Sun clone and had 7 partitions of 137GB a piece. (Using a USB to SATA adaptor)
I then had loaded a new hard disk on my laptop (T60...Lenova) with Solaris 10 X86. I tried to mount the hard disk but it kept telling me the mount point was busy and I... (2 Replies)
Hi guys.
Am about to install Solaris10 x86 and I was wondering if there are any news as to whether it is possible or not to install the os on an external drive, especially firewire, I suppose I will have to open my tower and put in the drive to install it..the machine I want to put it on,... (0 Replies)