Problem by cloning boot disk.

10 More Discussions You Might Find Interesting

1. Solaris

Use 'dd' to copy boot disk to larger target disk

Hi, I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ...

2. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk...

3. Linux

Disk cloning ?

Dear All I needed to clone my disk to another hard drive . I did it as the following : #dd if=/dev/sdb of=/dev/sdc But after a while, the procedure ended with the "writing to /dev/sdc input/output error" message. Can you please let me know how can I overcome this as the fdisk now returns as "...

4. Ubuntu

dd cloning of whole disk

I am using 'dd' to clone an entire hard drive which only has Ubuntu 11.10 and some data with no special options. The disks are both 1Tb, However, I did re-partition the target disk with gparted successfully. The new partions are not the same size as the source disk. When starting 'dd' no partitions...

5. Solaris

vxvm root disk booting problem - solved with boot -a. How?

Hi All, We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear: WARNING: Error writing ufs log state WARNING: ufs log for / changed state to Error WARNING: Please umount(1M) / and run...

6. Filesystems, Disks and Memory

Automated disk cloning

Hi, I'm running Ubuntu on my laptop. To keep my data safe and easy disaster recovery as well I bought similar HDD to one installed in my laptop with higher capacity and using USB box I'm doing disk clone to it. So at any time I can replace disk and carry on with my work as before. I'm trying...

7. Solaris

Disk cloning using ufsrestore

I am using ufsdump and ufsrestore to clone the root disk on one of my servers. I would like to automate this as much as possible, but have run into a problem where it prompts for changing the owner/mode when it is complete. Any ideas for running this in the background and not being prompted? ...

8. HP-UX

Hpux Disk Cloning

hello, Anybody that has already running script or command that can disk clone the hpux machine thanks

9. AIX

Problem cloning system

Hi everyone, I want to clone a AIX 5.2 system from a machine to another one. So i modified bosinst.data and image.data files (according to future platform) before making mksysb on old platform. After booting on CD and restoring system using mksysb tape, the installation is launched but ever...

10. SCO

Disk cloning

Hello everybody, :confused: I have to change the system disk on an old PC running SCO 5.0.5. The disk is up and running, this is a preventive action. My experience on UNIX is very limited and I look for the easyest solution to clone this unit. Is it possible with commands or through a clone...

LEARN ABOUT XFREE86

installgrub

installgrub(1M) 														   installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

	   Suppresses interaction when overwriting the master boot sector.

       -m

	   Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

	   The name of the GRUB stage 1 file.

       stage2

	   The name of the GRUB stage 2 file.

       raw-device

	   The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
	   devices,  specify  the  slice  where  the  GRUB  menu  file	is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
	   /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
		/boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

	   Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

								    24 May 2005 						   installgrub(1M)

Solaris