To keep the forums high quality for all users, please take the time to format your posts correctly.
First of all, use Code Tags when you post any code or data samples so others can easily read your code. You can easily do this by highlighting your code and then clicking on the # in the editing menu. (You can also type code tags [code] and [/code] by hand.)
Second, avoid adding color or different fonts and font size to your posts. Selective use of color to highlight a single word or phrase can be useful at times, but using color, in general, makes the forums harder to read, especially bright colors like red.
Third, be careful when you cut-and-paste, edit any odd characters and make sure all links are working property.
Hi. i dont think its related to that volume from zfs.
ex:/
Configure a service exporting tank1/myvol as a virtual disk:
host1# /opt/SUNWldm/bin/ldm add-vdiskserverdevice /dev/zvol/rdsk/tank1/myvol zvol@primary-vds0
Add the exported disk to domain (domain2 in this example):
fugitive, i asked above ..
give much more details about your system and how u configured your LDoms.
otherwise i cant say anything, according to behaviour of startup process, something wong with your configuration, certainly with assignment of devices to LDoms.
Generally, this is what we do:-
On primary, export 2 LUNs (add-vdsdev).
On primary, assign these disks to the ldom in question (add-vdisk).
On ldom, created mirrored zpool from these two disks.
On one server (which is older) we have:-
On primary, create mirrored zpool from the two LUNs.... (4 Replies)
Hi all,
I'm using Solaris 11.3.
HBA port connected to SAN disk 3T.
AVAILABLE DISK SELECTIONS:
0. c0t600A0B800033696A0000214B571938F1d0 <SUN-CSM200_R-0760 cyl 44556 alt 2 hd 255 sec 189>
/scsi_vhci/ssd@g600a0b800033696a0000214b571938f1
1. c2t3C58620E0C565100d0... (1 Reply)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
Apologies if this is the wrong forum..
I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the... (4 Replies)
I have viewed a few previous posts regarding this, but none of them quite described or worked with my issue.
I am out of local disk space on my LDOM Manager but still have plenty of SAN vCPU and Memory available so I am trying to install a new LDOM OS on SAN.
I have exposed the SAN to the... (0 Replies)
Hi, I need to expand a ZFS volume from 500GB to 800GB. I'd like to ask your help to confirm the following procedure:
Can I do it on the fly without bothering the users working on this volume?
Thank you in advance! (6 Replies)
Hello all. I have a perplexing problem
I have an AIX 5.1 system on an EMC SAN.
This system had been on a CX400 SAN for several years. The system was migrated to a CX700 just over a week ago. The migration consisted of utilizing on of the HBAs in the system and connecting to both SANs
... (9 Replies)
Hi,
We have 200GB SAN volume mounted on Redhat EL 5. which is working fine. As my SAN supports dynamic resizing of volumes, i unmounted the volume and resized the SAN Volume to 300 GB successfully. Then i mounted again but it shows 200GB only but data is intact.
Now, my requirement is to let... (3 Replies)
Dear Srs,
I have a Linux server (linux01) booting from SAN with a volume in a Nexsan SATAbeast storage array (san01). The disk/volume has four ext3 partitions, total size is near to 400GB, but only 20-30GB are in use.
I need to move this disk/volume to another Nexsan SATAbeast storage array... (0 Replies)