Mmap with fork : Resource unavaialable temporarily

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Fork: Resource temporarily unavailable

Hi friends, Working on a linux X86-64 bit system, I suddenly started getting this error (mentioned in subject) from various scripts. I googled, found that there are couple of reason which causes this issue. - less memory I am pretty sure, memory seems to be stable on my system and at the...

2. UNIX for Dummies Questions & Answers

Fork resource unavailable error, max # filehandles open?

I wrote a perl program that simultaneously reads in data from 691 tar.gz files using zcat. I can run one instance of the program without any issues and the memory and swap sizes are negligible. However, when I attempt to run more than 1 I start to get fork: resource unavailable messages. Are...

3. Programming

[ERROR:Resource temporarily unavailable!] Serial writing by termios library

Hello, I am using the termios library to write data that I get from a Bluetooth device to a modem via serial. The data arrive from the Bluetooth device correctly every 50ms and I have to bypass them on the serial ttyUSB3 where it is connected to a modem connected to a socket with static IP. The...

4. UNIX for Dummies Questions & Answers

Fork: Resource Temporarily Unavailable

I wrote a script that works most of the time but gave me fork: resource temporarily unavailable some of the time. I restarted my computer and now it runs fine but googling "fork: resource temporarily unavailable" and looking on the forums has not actually helped me figure out what exactly I...

5. UNIX for Advanced & Expert Users

fork: Resource temporarily unavailable , server unexpectedly unavailable network connection

Solaris 10 Server refuse to connect :wall: fork: Resource temporarily unavailable , server unexpectedly unavailable network connection , refuse error, disconnect message, fatal error type2, (protocol error type2) Issue has been resolved after taken few steps :b: First of all need to check...

6. Red Hat

cannot set user id: Resource temporarily unavailable (not open file/open process related)

First post, sorry to be a bother but this one has been dogging me. I have a process user (java application server) that trips a resource limit every couple weeks and need help finding what limit we're hitting. First, this is what's running: This is the error when jobs are run or the...

7. UNIX for Dummies Questions & Answers

Resource temporarily unavailable Error In Socket

Hi, Now I am programming to communicate with some network printer through TCP Socket program.By sending command "\033E 1\r" to printer,causes, check the port for error normally. In my case i used following code bytesSent = send( sockfd, "\033E 1\r",sizeof("\033E 1\r"), 0); ...

8. UNIX for Advanced & Expert Users

Fork:resource unavailable

Hello. I have code which create processes with fork(). I set a limit for processes by typing ulimit -u 20. Then I run my code who should create 100 processes. Unfortunately, I have a mistake there and I forgot to quit all of my forked processes when fork gave me return value -1. So I am trapped in...

9. Solaris

fork: Resource temporarily unavailable - What can I check ?

Hi everybody, I have an Unix box running Solaris and every day for 1 hour or 2 the box is stuck and I can only get this error message when trying to type a command : bash-3.00$ vmstat 5 bash: fork: Resource temporarily unavailable How can I trace what's is going wrong with this box ?...

10. Solaris

sendto failing "resource temporarily unavailable"

Well, I am not even sure if its failing, cause at the other end I have a select call and it wakes up and reads the data I sent fine. Ok here is the issue, I have a UDP socket(non blocking) through which I push some data to another port. At the other end I have select loop, waiting for this data....

LEARN ABOUT CENTOS

sam_mark_failed

SAM_STOP(3)					    Corosync Cluster Engine Programmer's Manual 				       SAM_STOP(3)

NAME

       sam_mark_failed - Mark process failed

SYNOPSIS

       #include <corosync/sam.h>

       cs_error_t sam_mark_failed (void);

DESCRIPTION

       The sam_mark_failed function is used with SAM_RECOVERY_POLICY_CMAP mostly together with SAM_RECOVERY_POLICY_RESTART to mark process failed.
       Process marked failed is killed without sending warn signal and control process will exit as with  SAM_RECOVERY_POLICY_QUIT  policy.  Condb
       key state will be set to failed so corosync watchdog can take required action.

RETURN VALUE

       This call return CS_OK value if successful, otherwise and error is returned.

ERRORS

       CS_ERR_BAD_HANDLE
	      library was not initialized by calling sam_initialize(3) or was already finalized

       CS_ERR_INVALID_PARAM
	      recovery policy doesn't has SAM_RECOVERY_POLICY_CMAP flag set

       CS_ERR_LIBRARY
	      some internal error appeared (communication with parent process)

SEE ALSO

       sam_initialize(3)

       CS_ERR_TRY_AGAIN Resource temporarily unavailable

       CS_ERR_INVALID_PARAM Invalid argument

       CS_ERR_ACCESS Permission denied

       CS_ERR_LIBRARY The connection failed

       CS_ERR_INTERRUPT System call inturrupted by a signal

       CS_ERR_NOT_SUPPORTED The requested protocol/functuality not supported

       CS_ERR_MESSAGE_ERROR Incorrect auth message received

       CS_ERR_NO_MEMORY Not enough memory to completed the requested task

corosync Man Page						    21/05/2010							       SAM_STOP(3)

Solaris