Login or Register to Ask a Question and Join Our Community


Solaris

cfgadm - is this an error?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris cfgadm - is this an error?
# 1  
Old 06-25-2009
cfgadm - is this an error?
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t2d0 disk connected configured unknown
c1::dsk/c1t3d0 disk connected configured unknown
c2 scsi-bus connected unconfigured unknown
c4 fc-private connected configured unknown
c4::216000c0ff80540a disk connected configured unknown
c4::216000c0ff90540a disk connected configured unknown
c5 fc-private connected configured unknown
c5::266000c0ffe0540a disk connected configured unusable
c5::266000c0fff0540a disk connected configured unknown




NOTE the one listed as unusable...
why is this?
do we have a faulty fiber card?
# 2  
Old 06-25-2009
It looks like a faulty port on a dual port card, or depending on the card type there might be no modulator/ an unseated module in that port. The former is more likely.
# 3  
Old 06-26-2009
Just confirm if the device is in use or not. If it has been removed, then unconfigure the LUNS that were removed from the SAN
# 4  
Old 06-26-2009
we have this setup as an MPXIO system.
about 10 LUN's

we had syslog messages with wording of

Code:
"REPORT LUN to D_ID=0x9d lun=0x0 failed: State:Timeout, Reason:Hardware Error. Giving up"

and

Code:
"mpxio: [ID 669396 kern.info] /scsi_vhci/ssd@g600c0ff00000000000540a5d5eb56309 (ssd26) multipath status: degraded, path /pci@1d,700000/SUNW,qlc@1/fp@0,0 (fp1) to target address: 266000c0ffe0540a,7 is offline. Load balancing: round-robin"

# 5  
Old 06-26-2009
What happens when you try
luxadm -e forcelip /dev/cfg/c5
# 6  
Old 06-26-2009
Quote:
Originally Posted by incredible
What happens when you try
luxadm -e forcelip /dev/cfg/c5
no response on command line.
but we get new logs in /var/adm/messages

Code:
Jun 26 19:14:13 svr_name qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE
Jun 26 19:14:13 svr_name qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop ONLINE

# 7  
Old 06-26-2009
cfgadm status now? Is it still showing as unusable?
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Print Error in Console and both Error & Output in Log file - UNIX

I am writing a shell script with 2 run time arguments. During the execution if i got any error, then it needs to redirected to a error file and in console. Also both error and output to be redirected to a log file. But i am facing the below error. #! /bin/sh errExit () { errMsg=`cat... (1 Reply)
Discussion started by: sarathy_a35
1 Replies

2. Solaris

Rpcinfo: can't contact portmapper: RPC: Authentication error; why = Failed (unspecified error)

I have two servers with a fresh install of Solaris 11, and having problems when doing rpcinfo between them. There is no firewall involved, so everything should theoretically be getting through. Does anyone have any ideas? I did a lot of Google searches, and haven't found a working solution yet. ... (2 Replies)
Discussion started by: christr
2 Replies

3. Solaris

Hot swapping disks on V240 - blue light not lit after cfgadm -c unconfigure

Hot swapping a drive on V240. So, I do cfgadm -c unconfigure <disk>. Then cfgadm -al reports disk as unconfigured as expected. format then tells me there is no disk. BUT, blue light does not come on. Done the exact same command on my V440 and blue light does come on. V240 Server Admin... (0 Replies)
Discussion started by: psychocandy
0 Replies

4. UNIX for Dummies Questions & Answers

> 5 ")syntax error: operand expected (error token is " error

im kinda new to shell scripting so i need some help i try to run this script and get the error code > 5 ")syntax error: operand expected (error token is " the code for the script is #!/bin/sh # # script to see if the given value is correct # # Define errors ER_AF=86 # Var is... (4 Replies)
Discussion started by: metal005
4 Replies

5. Solaris

Remove old subpaths from vxvm/format/cfgadm

Hi, I`m having a server, that was initially having 2 HBA`s, and dmpnodes were creates with 2 subpaths: # vxdisk -o alldgs list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:none - - online invalid c0t1d0s2 auto:none - ... (5 Replies)
Discussion started by: masloff
5 Replies

6. Solaris

Issue with cfgadm

I have an issue with on T3-Lun where Veritas dont like it anymore and OS-system have issues with it too. So I thought to unconfigure it but even that does not work cfgadm -al | grep c17 c17::50020f230000eae0 disk connected unconfigured unkown then I tried a cfgadm -c unconfigure... (2 Replies)
Discussion started by: manni2
2 Replies

7. Solaris

unconfigure using cfgadm

Hi, One of 2 local disks on V480 running solaris 10 and SVM failed. Now after running metadettach for submirrors on that disk, I want to unconfigure the FAULTY disk using cfgadm -c uncofigure command..and then put new one and configure that. but surprisingly I don't see local dsk in cfgadm... (17 Replies)
Discussion started by: upengan78
17 Replies

8. AIX

nim mksysb error :/usr/bin/savevg[33]: 1016,07: syntax error

-------------------------------------------------------------------------------- Hello, help me please. I am trying to create a mksysb bakup using nim. I am geting this error, how to correct it ? : Command : failed stdout: yes stderr: no... (9 Replies)
Discussion started by: astjen
9 Replies

9. UNIX for Dummies Questions & Answers

awk Shell Script error : "Syntax Error : `Split' unexpected

hi there i write one awk script file in shell programing the code is related to dd/mm/yy to month, day year format but i get an error please can anybody help me out in this problem ?????? i give my code here including error awk ` # date-month -- convert mm/dd/yy to month day,... (2 Replies)
Discussion started by: Herry
2 Replies

10. UNIX for Dummies Questions & Answers

Error: Internal system error: Unable to initialize standard output file

Hey guys, need some help. Running AIX Version 5.2 and one of our cron jobs is writing errors to a log file. Any ideas on the following error message. Error: Internal system error: Unable to initialize standard output file I'm guessing more info might be needed, so let me know. Thanks (2 Replies)
Discussion started by: firkus
2 Replies
Login or Register to Ask a Question