Hi everybody,
I'm facing a little trouble with my system. I have a SPARC M4000 server, which connected to a SAN with 2 Brocade 300 Switches and 1 STK 6140. The M4000 has 2 FC HBA cards, one port per card. Each card connect to one switch as follows...
OK. The problem is when I mapped 2 (logical) volumes from STK 6140 to the M4000 server, I got 6 mapped volumes show in the format's ouput :
Let's forget the label errors.
I have enabled the multipath function on Solaris by using
# stmsboot -D fd -e
I wanna know that what are the 4 volumes marked with SUN-UniversalXport-0715 (LUN 31) ? and how to get rid of them.
I searched and found somebody had same trouble. Someone tried to delete them (the unwanted volumes) and the problem's gone (of course), but I don't want to do that without understanding what they are.
Its ok.
-UniversalXport- what you see here is similar to EMC's what they call "gatekeeper".And if you'ev enabled multipathing, you will see 1 path, if you've disabled multpathing, you will see 2 paths
Hi all,
i'm trying to rsync directories from server A to server B
ssh works perfect without keys, scp also works, but when executing the rsync command i get the following error:
permission denied
unexpected EOF in read_timeout
Command is:
rsync -avzn ${LOCAL_DIR}... (1 Reply)
Dear all
can you give me command to show me last unexpected reboot time the date, month, and the year on solaris 10
i've tried
uptime
who-b
last reboot
but nothing give me the year last reboot only the date , month and time (6 Replies)
Hello Admins..
I am going through solaris volume manager guide for RAID-0 concatenation and stripes, I do not understand the concept of stripe from following example of concatenation.
There is an eample for concatenation:
# metainit d25 1 1 c0t1d0s2
d25: Concat/Stripe is setup
the... (5 Replies)
Hi,
I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies
1)Physical Volume
2)Volume Group
3)Logical Volume
4)Physical Partition
Please help me to understand these concepts. (6 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi Friends,
I have to migrate my raid-1 volume to raid -5 online.
Can anyone please help me, If possible then send me the step by step commands for online migration.
Thanks in advance. (2 Replies)
Hello All,
I have small doubt. It's related to SVM in solaris 10. I have created raid 0 (striping) using 3 slices of 500 MB size (default interlace value as 32KB)
d2: Concat/Stripe ---- Interlace value is 32 KB
Size: 2923830 blocks (1.4 GB)
Stripe 0: (interlace: 64 blocks)
Device Start... (1 Reply)
Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)