I have a services file configured in /etc in there windows clients connect to my server on port 6034-6037
when I do the following
it pulls all the connections active for those ports
so right now I have 10 clients connected but posted only 3
I need to kill only these ESTABLISHED clients that relate to these ports only
I did the following
and
I hoped this would set the interval to send a reset at 800ms or lessen the keep alive but the connections are still there as ESTABLISHED. Am I looking at this the wrong way or what I am trying to do is not what i posted.
Please help to point me in the right direction this is sort of affecting out class
Last edited by deaconf19; 05-06-2009 at 08:21 AM..
I have a services file configured in /etc in there windows clients connect to my server on port 6034-6037
when I do the following
it pulls all the connections active for those ports
It doesn't. You can't have a single name matching a range of ports in /etc/services.
You need to set something like TestService1, TestService2 and so on and grep TestService to achieve what you want.
in /etc my services file has TestService1 TestService2 for what my software is doing it connects to port 6043 for all connections related to TestService1 when you preform a specific action with that software.
I have a command to check the status of hostname and port number,
echo > /dev/tcp/hostname/80
echo $?
0
success case
echo > /dev/tcp/hostname/809999
I got the output
-------------------
connection timed out
It took almost 4 minutes to time out,,, how can I set it to 10 seconds?
my... (2 Replies)
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
I have problem with oracle solaris 10 running on oracle sparc T4-2 server.
Os information: 5.10 Generic_150400-03 sun4v sparc sun4v
Output from tcpstat.d script
TCP bytes: out outRetrans in inDup inUnorder
6833763 7300 98884 0... (2 Replies)
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Following command was set up in startup script on Solaris 8 servers - improved network transfers of files from one server to the another (doubled transfer speed).
ndd -set /dev/tcp tcp_host_param '10.140.20.10 sendspace 279600 recvspace 279600 timestamp 1'
Now they are getting a new server... (15 Replies)
While in SCO Openserver 5.0.7, Sybase listened to /dev/inet/tcp, the same is not working in SCO Openserver 6. The Network card is however active and pinging fine. What can be the reason? What is the way out?
An early response will be appreciated.
Thank you
Regards
TCG (2 Replies)
Hi,
I would like to know whether there is any config file that i can refer to for the result of 'ndd -get /dev/tcp tcp_time_wait_interval'?
When i man 'ndd', there is one statement which is -> Each driver chooses which parameters to make visible using ndd. Does it answering my question above... (3 Replies)
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Hi Guys,
I need help with ndd.
I was going through network FAQ but i have more questions then answers regarding ndd.
#ndd -set /dev/hme instance 0
#ndd -set /dev/hme adv_100fdx_cap 1
#ndd -set /dev/hme adv_100hdx_cap 0
#ndd -set /dev/hme adv_10fdx_cap 0
#ndd -set /dev/hme adv_10hdx_cap 0... (2 Replies)
I am trying to set an interface to 100/Full, but the command I use are getting rejected. I think it is the last argument, but I don't know how to find the correct values.
I am trying to use the following script, but change hme to le .
echo "Setting hme interface 1: 100mb/full-duplex..."
... (2 Replies)