Here is the available disk & partition table information ,
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0d0 <drive type unknown>
/pci@0,0/pci-ide@1f,1/ide@0/cmdk@0,0
1. c0d1 <DEFAULT cyl 1273 alt 2 hd 255 sec 63>
/pci@0,0/pci-ide@1f,1/ide@0/cmdk@1,0
Specify disk (enter its number): 1
selecting c0d1
Controller working list found
[disk formatted, defect list found]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0d1s0 is currently mounted on /. Please see umount(1M).
Total disk size is 19457 cylinders
Total disk size is 19457 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris2 1 1275 1275 7
2 EXT LBA 1653 2927 1275 7
3 Ext Win95 2928 4325 1398 7
partition> print
Current partition table (original):
Total disk cylinders available: 1273 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 361 - 1272 6.99GB (912/0/0) 14651280
1 swap wu 3 - 68 517.72MB (66/0/0) 1060290
2 backup wm 0 - 1272 9.75GB (1273/0/0) 20450745
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 home wm 69 - 360 2.24GB (292/0/0) 4690980
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wu 1 - 2 15.69MB (2/0/0) 32130
So this is what my solaris disk strucure is,so i i need to utilize the
c0d1 hard disk (120gb).Is it possible to do it?
Regards,
jayaprakash