Type of RAID


 
Thread Tools Search this Thread
Operating Systems Solaris Type of RAID
# 8  
Old 04-16-2009
SVM- you will see /dev/md/dsk/dx in your vfstab file etc.
VxVM - you will see /dev/vx/dsk/somedg/testfs etc...
H/W raid - you can check using "raidctl" commands
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies

2. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

3. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

5. Linux

how to identify the raid type on Linux?

Hi any idea on why I am getting this? /sbin/mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. thanks. (2 Replies)
Discussion started by: melanie_pfefer
2 Replies

6. AIX

how to identify the raid type on aix

hi how to identify the raid type on aix? thx (1 Reply)
Discussion started by: melanie_pfefer
1 Replies

7. Solaris

raid type

how to get the raid type of a mount if I am using solaris disksuite? thanks (1 Reply)
Discussion started by: melanie_pfefer
1 Replies

8. Programming

array type has incomplete element type

Dear colleagues, One of my friend have a problem with c code. While compiling a c program it displays a message like "array type has incomplete element type". Any body can provide a solution for it. Jaganadh.G (1 Reply)
Discussion started by: jaganadh
1 Replies
Login or Register to Ask a Question
vxr5check(1M)															     vxr5check(1M)

NAME
vxr5check - verify RAID-5 volume parity SYNOPSIS
/etc/vx/bin/vxr5check [-i | -v] [-g diskgroup] volume DESCRIPTION
The vxr5check utility compares the parity of each stripe of a RAID-5 volume specified by volume. vxr5check reads the data for each stripe, generates the parity for this stripe, and compares this parity with the existing parity. vxr5check can be run against the entire RAID-5 volume, or incrementally on RAID-5 stripe boundaries, by specifying the -i option. OPTIONS
-g diskgroup Specifies the Veritas Volume Manager (VxVM) disk group name for the RAID-5 volume name for verification. If this option is not specified, the default disk group is determined using the rules given in the vxdg(1M) manual page. -i Verifies the RAID-5 volume incrementally per stripes. If a parity mismatch is found, that stripe location is displayed. -v Verbose output for the incremental vxr5check verification. The verbose option outputs each stripe number that is being verified. OUTPUT FORMAT
In verbose mode and incremental mode, summary reports for each stripe of the RAID-5 volume are printed in output records. If an error is returned for a stripe, then an error message and stripe number are displayed. In non-verbose mode, if an error is returned, an error mes- sage is displayed. If a parity mismatch error is determined on a stripe, vxr5check exits on that stripe and does not continue for the remaining stripes in the RAID-5 volume. FILES
/usr/lib/vxvm/bin/vxr5vrfy The utility that vxr5check calls to perform RAID-5 parity verification operations for the specified RAID-5 volume. EXIT CODES
The vxr5check utility exits with a non-zero status if the attempted operation fails. A non-zero exit code is not a complete indicator of the problems encountered, but rather denotes the first condition that prevented further execution of the utility. See vxintro(1M) for a list of standard exit codes. NOTES
Do not run vxr5check on a volume that is in degraded mode. SEE ALSO
vxevac(1M), vxintro(1M), vxmend(1M), vxvol(1M) VxVM 5.0.31.1 24 Mar 2008 vxr5check(1M)