Login or Register to Ask a Question and Join Our Community


Solaris

prtdiag - Segmentation Fault

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris prtdiag - Segmentation Fault
# 1  
Old 03-30-2009
prtdiag - Segmentation Fault
Hi,

Recently installed a Firmware patch on T5120 (solaris 10,138888-03).

The patch installation was Success and system came up fine as well. My apps are running fine too.

Problem is prtdiag does not work as it used to earlier. the output is very different from other t5120s I have and prtdiag -v gives Segmentation Fault.

Quote:
prtdiag -v
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.29.1 2008/10/29 14:15

IO ASIC revisions:
------------------
Location Path Device Revision
-------------------- --------------------------------------------- ------------------------------ ---------
Segmentation Fault
prtdiag
Quote:
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58

============================ Environmental Status ============================
Fan sensors:
All fan sensors are OK.

Temperature sensors:
All temperature sensors are OK.

Current sensors:
All current sensors are OK.

Voltage sensors:
All voltage sensors are OK.

Voltage indicators:
All voltage indicators are OK.

============================ FRU Status ============================
All FRUs are enabled.

Patch Installed : 136932-09 , SPARC Enterprise T5120 & T5220 Sun System Firmware 7.1.7.h flashprom update

Reason : console from sc /ilom was not working properly.

prtdiag from some other (unpatched firmware) t5120 is below :
Quote:
#prtdiag
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------
0 1167 MHz SUNW,UltraSPARC-T2 on-line
1 1167 MHz SUNW,UltraSPARC-T2 on-line
2 1167 MHz SUNW,UltraSPARC-T2 on-line
3 1167 MHz SUNW,UltraSPARC-T2 on-line
4 1167 MHz SUNW,UltraSPARC-T2 on-line
5 1167 MHz SUNW,UltraSPARC-T2 on-line
6 1167 MHz SUNW,UltraSPARC-T2 on-line
7 1167 MHz SUNW,UltraSPARC-T2 on-line
8 1167 MHz SUNW,UltraSPARC-T2 on-line
9 1167 MHz SUNW,UltraSPARC-T2 on-line
10 1167 MHz SUNW,UltraSPARC-T2 on-line
11 1167 MHz SUNW,UltraSPARC-T2 on-line
12 1167 MHz SUNW,UltraSPARC-T2 on-line
13 1167 MHz SUNW,UltraSPARC-T2 on-line
14 1167 MHz SUNW,UltraSPARC-T2 on-line
15 1167 MHz SUNW,UltraSPARC-T2 on-line
16 1167 MHz SUNW,UltraSPARC-T2 on-line
17 1167 MHz SUNW,UltraSPARC-T2 on-line
18 1167 MHz SUNW,UltraSPARC-T2 on-line
19 1167 MHz SUNW,UltraSPARC-T2 on-line
20 1167 MHz SUNW,UltraSPARC-T2 on-line
21 1167 MHz SUNW,UltraSPARC-T2 on-line
22 1167 MHz SUNW,UltraSPARC-T2 on-line
23 1167 MHz SUNW,UltraSPARC-T2 on-line
24 1167 MHz SUNW,UltraSPARC-T2 on-line
25 1167 MHz SUNW,UltraSPARC-T2 on-line
26 1167 MHz SUNW,UltraSPARC-T2 on-line
27 1167 MHz SUNW,UltraSPARC-T2 on-line
28 1167 MHz SUNW,UltraSPARC-T2 on-line
29 1167 MHz SUNW,UltraSPARC-T2 on-line
30 1167 MHz SUNW,UltraSPARC-T2 on-line
31 1167 MHz SUNW,UltraSPARC-T2 on-line

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58 LSI,1068E


#######prtdiag -v

System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------
0 1167 MHz SUNW,UltraSPARC-T2 on-line
1 1167 MHz SUNW,UltraSPARC-T2 on-line
2 1167 MHz SUNW,UltraSPARC-T2 on-line
3 1167 MHz SUNW,UltraSPARC-T2 on-line
4 1167 MHz SUNW,UltraSPARC-T2 on-line
5 1167 MHz SUNW,UltraSPARC-T2 on-line
6 1167 MHz SUNW,UltraSPARC-T2 on-line
7 1167 MHz SUNW,UltraSPARC-T2 on-line
8 1167 MHz SUNW,UltraSPARC-T2 on-line
9 1167 MHz SUNW,UltraSPARC-T2 on-line
10 1167 MHz SUNW,UltraSPARC-T2 on-line
11 1167 MHz SUNW,UltraSPARC-T2 on-line
12 1167 MHz SUNW,UltraSPARC-T2 on-line
13 1167 MHz SUNW,UltraSPARC-T2 on-line
14 1167 MHz SUNW,UltraSPARC-T2 on-line
15 1167 MHz SUNW,UltraSPARC-T2 on-line
16 1167 MHz SUNW,UltraSPARC-T2 on-line
17 1167 MHz SUNW,UltraSPARC-T2 on-line
18 1167 MHz SUNW,UltraSPARC-T2 on-line
19 1167 MHz SUNW,UltraSPARC-T2 on-line
20 1167 MHz SUNW,UltraSPARC-T2 on-line
21 1167 MHz SUNW,UltraSPARC-T2 on-line
22 1167 MHz SUNW,UltraSPARC-T2 on-line
23 1167 MHz SUNW,UltraSPARC-T2 on-line
24 1167 MHz SUNW,UltraSPARC-T2 on-line
25 1167 MHz SUNW,UltraSPARC-T2 on-line
26 1167 MHz SUNW,UltraSPARC-T2 on-line
27 1167 MHz SUNW,UltraSPARC-T2 on-line
28 1167 MHz SUNW,UltraSPARC-T2 on-line
29 1167 MHz SUNW,UltraSPARC-T2 on-line
30 1167 MHz SUNW,UltraSPARC-T2 on-line
31 1167 MHz SUNW,UltraSPARC-T2 on-line

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58 LSI,1068E

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.27.10 2007/12/07 10:45

IO ASIC revisions:
------------------
Location Path Device Revision
-------------------- --------------------------------------------- ------------------------------ ---------
MB/PCI-SWITCH0 /pci@0/pci@0 pciex10b5,8533.aa 170
MB/PCI-SWITCH2 /pci@0/pci@0/pci@1/pci@0 pciex10b5,8517.ad 173
MB/PCI-SWITCH1 /pci@0/pci@0/pci@8/pci@0 pciex10b5,8533.aa 170
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 pciex8086,105e.108e.105e.6 6
MB/SAS-SATA-HBA /pci@0/pci@0/pci@2/scsi@0 pciex1000,58.1000.1000.2 2
Any ideas ?
# 2  
Old 03-30-2009
Looks like following commands are required to be run :

Quote:
/usr/sbin/svcadm disable svc:/system/picl
/usr/sbin/svcadm enable svc:/system/picl
/usr/sbin/svcadm restart svc:/system/picl
Smilie

prtdiag -v
Quote:
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------
0 1165 MHz SUNW,UltraSPARC-T2 on-line
1 1165 MHz SUNW,UltraSPARC-T2 on-line
2 1165 MHz SUNW,UltraSPARC-T2 on-line
3 1165 MHz SUNW,UltraSPARC-T2 on-line
4 1165 MHz SUNW,UltraSPARC-T2 on-line
5 1165 MHz SUNW,UltraSPARC-T2 on-line
6 1165 MHz SUNW,UltraSPARC-T2 on-line
7 1165 MHz SUNW,UltraSPARC-T2 on-line
8 1165 MHz SUNW,UltraSPARC-T2 on-line
9 1165 MHz SUNW,UltraSPARC-T2 on-line
10 1165 MHz SUNW,UltraSPARC-T2 on-line
11 1165 MHz SUNW,UltraSPARC-T2 on-line
12 1165 MHz SUNW,UltraSPARC-T2 on-line
13 1165 MHz SUNW,UltraSPARC-T2 on-line
14 1165 MHz SUNW,UltraSPARC-T2 on-line
15 1165 MHz SUNW,UltraSPARC-T2 on-line
16 1165 MHz SUNW,UltraSPARC-T2 on-line
17 1165 MHz SUNW,UltraSPARC-T2 on-line
18 1165 MHz SUNW,UltraSPARC-T2 on-line
19 1165 MHz SUNW,UltraSPARC-T2 on-line
20 1165 MHz SUNW,UltraSPARC-T2 on-line
21 1165 MHz SUNW,UltraSPARC-T2 on-line
22 1165 MHz SUNW,UltraSPARC-T2 on-line
23 1165 MHz SUNW,UltraSPARC-T2 on-line
24 1165 MHz SUNW,UltraSPARC-T2 on-line
25 1165 MHz SUNW,UltraSPARC-T2 on-line
26 1165 MHz SUNW,UltraSPARC-T2 on-line
27 1165 MHz SUNW,UltraSPARC-T2 on-line
28 1165 MHz SUNW,UltraSPARC-T2 on-line
29 1165 MHz SUNW,UltraSPARC-T2 on-line
30 1165 MHz SUNW,UltraSPARC-T2 on-line
31 1165 MHz SUNW,UltraSPARC-T2 on-line

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58 LSI,1068E

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.29.1 2008/10/29 14:15

IO ASIC revisions:
------------------
Location Path Device Revision
-------------------- --------------------------------------------- ------------------------------ ---------
MB/PCI-SWITCH0 /pci@0/pci@0 pciex10b5,8533.aa 170
MB/PCI-SWITCH2 /pci@0/pci@0/pci@1/pci@0 pciex10b5,8517.ad 173
MB/PCI-SWITCH1 /pci@0/pci@0/pci@8/pci@0 pciex10b5,8533.aa 170
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 pciex8086,105e.108e.105e.6 6
MB/SAS-SATA-HBA /pci@0/pci@0/pci@2/scsi@0 pciex1000,58.1000.1000.2 2

============================ Environmental Status ============================
Fan sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/FANBD0/FM1/F0 TACH ok
SYS/FANBD0/FM1/F1 TACH ok
SYS/FANBD1/FM0/F0 TACH ok
SYS/FANBD1/FM0/F1 TACH ok
SYS/FANBD1/FM1/F0 TACH ok
SYS/FANBD1/FM1/F1 TACH ok
SYS/FANBD1/FM2/F0 TACH ok
SYS/FANBD1/FM2/F1 TACH ok

Temperature sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/MB T_AMB ok
SYS/MB/CMP0/BR0/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR0/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR1/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR1/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR2/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR2/CH1/D0 T_AMB ok
SYS/MB/CMP0/BR3/CH0/D0 T_AMB ok
SYS/MB/CMP0/BR3/CH1/D0 T_AMB ok
SYS/MB/CMP0 T_TCORE ok
SYS/MB/CMP0 T_BCORE ok

Current sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/PS0 I_IN_MAIN ok
SYS/PS0 I_IN_LIMIT ok
SYS/PS0 I_OUT_MAIN ok
SYS/PS0 I_OUT_LIMIT ok
SYS/PS1 I_IN_MAIN ok
SYS/PS1 I_IN_LIMIT ok
SYS/PS1 I_OUT_MAIN ok
SYS/PS1 I_OUT_LIMIT ok

Voltage sensors:
------------------------------------------------------------
Location Sensor Status
------------------------------------------------------------
SYS/MB V_VMEML ok
SYS/MB V_VMEMR ok
SYS/MB V_+3V3_STBY ok
SYS/MB V_VCORE ok
SYS/MB V_+3V3_MAIN ok
SYS/MB V_VDDIO ok
SYS/MB V_+12V0_MAIN ok
SYS/MB V_VBAT ok
SYS/PS0 V_IN_MAIN ok
SYS/PS0 V_OUT_MAIN ok
SYS/PS1 V_IN_MAIN ok
SYS/PS1 V_OUT_MAIN ok

Voltage indicators:
------------------------------------------------------------
Location Indicator Condition
------------------------------------------------------------
SYS/MB VCORE_POK ok
SYS/MB VMEML_POK ok
SYS/MB VMEMR_POK ok
SYS/MB I_USB0 ok
SYS/MB I_USB1 ok
SYS/PS0 AC_POK ok
SYS/PS0 DC_POK ok
SYS/PS0 CUR_FAULT ok
SYS/PS0 VOLT_FAULT ok
SYS/PS0 FAN_FAULT ok
SYS/PS0 TEMP_FAULT ok
SYS/PS1 AC_POK ok
SYS/PS1 DC_POK ok
SYS/PS1 CUR_FAULT ok
SYS/PS1 VOLT_FAULT ok
SYS/PS1 FAN_FAULT ok
SYS/PS1 TEMP_FAULT ok

LEDs:
------------------------------------------------------------
Location LED State
------------------------------------------------------------
SYS SERVICE off
SYS LOCATE off
SYS ACT steady
SYS PS_FAULT off
SYS TEMP_FAULT off
SYS FAN_FAULT off
SYS/MB/CMP0/BR0/CH0/D0 SERVICE off
SYS/MB/CMP0/BR0/CH1/D0 SERVICE off
SYS/MB/CMP0/BR1/CH0/D0 SERVICE off
SYS/MB/CMP0/BR1/CH1/D0 SERVICE off
SYS/MB/CMP0/BR2/CH0/D0 SERVICE off
SYS/MB/CMP0/BR2/CH1/D0 SERVICE off
SYS/MB/CMP0/BR3/CH0/D0 SERVICE off
SYS/MB/CMP0/BR3/CH1/D0 SERVICE off
SYS/HDD0 SERVICE off
SYS/HDD0 OK2RM off
SYS/HDD1 SERVICE off
SYS/HDD1 OK2RM off
SYS/HDD2 SERVICE off
SYS/HDD2 OK2RM off
SYS/HDD3 SERVICE off
SYS/HDD3 OK2RM off
SYS/FANBD0/FM1 SERVICE off
SYS/FANBD1/FM0 SERVICE off
SYS/FANBD1/FM1 SERVICE off
SYS/FANBD1/FM2 SERVICE off

============================ FRU Status ============================
Location Name Status
------------------------------------------------------
SYS MB enabled
SYS/MB RISER0 enabled
SYS/MB RISER1 enabled
SYS/MB RISER2 enabled
SYS/MB SCC_NVRAM enabled
SYS/MB/CMP0/BR0/CH0 D0 enabled
SYS/MB/CMP0/BR0/CH1 D0 enabled
SYS/MB/CMP0/BR1/CH0 D0 enabled
SYS/MB/CMP0/BR1/CH1 D0 enabled
SYS/MB/CMP0/BR2/CH0 D0 enabled
SYS/MB/CMP0/BR2/CH1 D0 enabled
SYS/MB/CMP0/BR3/CH0 D0 enabled
SYS/MB/CMP0/BR3/CH1 D0 enabled
SYS HDD0 enabled
SYS HDD1 enabled
SYS HDD2 enabled
SYS HDD3 enabled
SYS PDB enabled
SYS SASBP enabled
SYS DVD enabled
SYS USBBD enabled
SYS FANBD0 enabled
SYS/FANBD0 FM1 enabled
SYS FANBD1 enabled
SYS/FANBD1 FM0 enabled
SYS/FANBD1 FM1 enabled
SYS/FANBD1 FM2 enabled
SYS PS0 enabled
SYS PS1 enabled

============================ FW Version ============================
Version
------------------------------------------------------------
Sun System Firmware 7.1.7.h 2009/02/13 11:42


====================== System PROM revisions =======================
Version
------------------------------------------------------------
OBP 4.29.1 2008/10/29 14:15

Chassis Serial Number
---------------------
<NUmber>
I hope this output is expected Smilie Other system shows very small output ( one with out firmware patch)
prtdiag -v
Quote:
System Configuration: Sun Microsystems sun4v SPARC Enterprise T5120
Memory size: 8064 Megabytes

================================ Virtual CPUs ================================


CPU ID Frequency Implementation Status
------ --------- ---------------------- -------
0 1167 MHz SUNW,UltraSPARC-T2 on-line
1 1167 MHz SUNW,UltraSPARC-T2 on-line
2 1167 MHz SUNW,UltraSPARC-T2 on-line
3 1167 MHz SUNW,UltraSPARC-T2 on-line
4 1167 MHz SUNW,UltraSPARC-T2 on-line
5 1167 MHz SUNW,UltraSPARC-T2 on-line
6 1167 MHz SUNW,UltraSPARC-T2 on-line
7 1167 MHz SUNW,UltraSPARC-T2 on-line
8 1167 MHz SUNW,UltraSPARC-T2 on-line
9 1167 MHz SUNW,UltraSPARC-T2 on-line
10 1167 MHz SUNW,UltraSPARC-T2 on-line
11 1167 MHz SUNW,UltraSPARC-T2 on-line
12 1167 MHz SUNW,UltraSPARC-T2 on-line
13 1167 MHz SUNW,UltraSPARC-T2 on-line
14 1167 MHz SUNW,UltraSPARC-T2 on-line
15 1167 MHz SUNW,UltraSPARC-T2 on-line
16 1167 MHz SUNW,UltraSPARC-T2 on-line
17 1167 MHz SUNW,UltraSPARC-T2 on-line
18 1167 MHz SUNW,UltraSPARC-T2 on-line
19 1167 MHz SUNW,UltraSPARC-T2 on-line
20 1167 MHz SUNW,UltraSPARC-T2 on-line
21 1167 MHz SUNW,UltraSPARC-T2 on-line
22 1167 MHz SUNW,UltraSPARC-T2 on-line
23 1167 MHz SUNW,UltraSPARC-T2 on-line
24 1167 MHz SUNW,UltraSPARC-T2 on-line
25 1167 MHz SUNW,UltraSPARC-T2 on-line
26 1167 MHz SUNW,UltraSPARC-T2 on-line
27 1167 MHz SUNW,UltraSPARC-T2 on-line
28 1167 MHz SUNW,UltraSPARC-T2 on-line
29 1167 MHz SUNW,UltraSPARC-T2 on-line
30 1167 MHz SUNW,UltraSPARC-T2 on-line
31 1167 MHz SUNW,UltraSPARC-T2 on-line

======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 8 GB 4 2 GB MB/CMP0/BR0/CH0/D0
MB/CMP0/BR0/CH1/D0
2 GB MB/CMP0/BR1/CH0/D0
MB/CMP0/BR1/CH1/D0
2 GB MB/CMP0/BR2/CH0/D0
MB/CMP0/BR2/CH1/D0
2 GB MB/CMP0/BR3/CH0/D0
MB/CMP0/BR3/CH1/D0


========================= IO Configuration =========================

IO
Location Type Slot Path Name Model
----------- ----- ---- --------------------------------------------- ------------------------- ---------
MB/PCIE PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0 pci-pciexclass,060400
MB/NET0 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 network-pciex8086,105e
MB/NET1 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 network-pciex8086,105e
MB/NET2 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 network-pciex8086,105e
MB/NET3 PCIE MB /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 network-pciex8086,105e
MB/PCIE PCIE MB /pci@0/pci@0/pci@2/scsi@0 scsi-pciex1000,58 LSI,1068E

========================= HW Revisions =======================================

System PROM revisions:
----------------------
OBP 4.27.10 2007/12/07 10:45

IO ASIC revisions:
------------------
Location Path Device Revision
-------------------- --------------------------------------------- ------------------------------ ---------
MB/PCI-SWITCH0 /pci@0/pci@0 pciex10b5,8533.aa 170
MB/PCI-SWITCH2 /pci@0/pci@0/pci@1/pci@0 pciex10b5,8517.ad 173
MB/PCI-SWITCH1 /pci@0/pci@0/pci@8/pci@0 pciex10b5,8533.aa 170
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE0 /pci@0/pci@0/pci@1/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0 pciex8086,105e.108e.105e.6 6
MB/GBE1 /pci@0/pci@0/pci@1/pci@0/pci@3/network@0,1 pciex8086,105e.108e.105e.6 6
MB/SAS-SATA-HBA /pci@0/pci@0/pci@2/scsi@0 pciex1000,58.1000.1000.2 2
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Programming

C. To segmentation fault or not to segmentation fault, that is the question.

Oddities with gcc, 2.95.3 for the AMIGA and 4.2.1 for MY current OSX 10.14.1... I am creating a basic calculator for the AMIGA ADE *NIX emulator in C as it does not have one. Below are two very condensed snippets of which I have added the results inside the each code section. IMPORTANT!... (11 Replies)
Discussion started by: wisecracker
11 Replies

2. Homework & Coursework Questions

Segmentation Fault

this is a network programming code to run a rock paper scissors in a client and server. I completed it and it was working without any error. After I added the findWinner function to the server code it starts giving me segmentation fault. -the segmentation fault is fixed Current problem -Also... (3 Replies)
Discussion started by: femchi
3 Replies

3. Programming

Using gdb, ignore beginning segmentation fault until reproduce environment segmentation fault

I use a binary name (ie polo) it gets some parameter , so for debugging normally i do this : i wrote script for watchdog my app (polo) and check every second if it's not running then start it , the problem is , if my app , remain in state of segmentation fault for a while (ie 15 ... (6 Replies)
Discussion started by: pooyair
6 Replies

4. UNIX for Dummies Questions & Answers

Segmentation fault

#include<stdio.h> #include<malloc.h> #include<unistd.h> #include<stdlib.h> void *start_1(void *argv) { printf("thread 0x%x\n",(unsigned int)pthread_self()); pthread_exit((void*)1); } void *start_2(void *argv) { printf("thread 0x%x\n",(unsigned int)pthread_self()); return (void*)2; }... (2 Replies)
Discussion started by: vincent__tse
2 Replies

5. UNIX for Advanced & Expert Users

segmentation fault with ps

What does this mean and why is this happening? $ ps -ef | grep ocular Segmentation fault (core dumped) $ ps -ef | grep ocular Segmentation fault (core dumped) $ ps aux | grep ocular Segmentation fault (core dumped) $ ps Segmentation fault (core dumped) $ pkill okular $ ps... (1 Reply)
Discussion started by: cokedude
1 Replies

6. Programming

segmentation fault

Hi, I am having this segmentation fault not in the following program, bt. in my lab program . My lab program is horrible long so cannot post it here bt. I am using the following logic in my program which is giving the segmentation fault. Bt. if I run this sample program as it is it dosen't give... (3 Replies)
Discussion started by: mind@work
3 Replies

7. UNIX for Dummies Questions & Answers

Segmentation Fault

Hi, While comparing primary key data of two tables thr bteq script I am getting this Error. This script is a shell script. *** Error: The following error was encountered on the output file. Script.sh: 3043492 Segmentation fault(coredump) Please let me know how to get through it. ... (5 Replies)
Discussion started by: monika
5 Replies

8. Programming

Why not a segmentation fault??

Hi, Why I don't receive a segmentation fault in the following sample. int main(void) { char buff; sprintf(buff,"Hello world"); printf("%s\n",buff); } If I define a buffer of 10 elements and I'm trying to put inside it twelve elements, Should I receive a sigsev... (22 Replies)
Discussion started by: lagigliaivan
22 Replies

9. Programming

Hi! segmentation fault

I have written a program which takes a directory as command line arguments and displays all the dir and files in it. I don't know why I have a problem with the /etc directory.It displays all the directories and files untill it reaches a sub directory called peers which is in /etc/ppp/peers.the... (4 Replies)
Discussion started by: vijlak
4 Replies

10. UNIX for Dummies Questions & Answers

Segmentation Fault

hello all, I tried a program on an array to intialise array elements from the standard input device.it is an integer array of 5 elements.but after entering the 4th element it throws a message called "Segmentation Fault" and returns to the command prompt without asking for the 5th element. ... (3 Replies)
Discussion started by: compbug
3 Replies
Login or Register to Ask a Question