Making the ZFS snapshot service run faster

8 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Making script run faster

Can someone help me edit the below script to make it run faster? Shell: bash OS: Linux Red Hat The point of the script is to grab entire chunks of information that concerns the service "MEMORY_CHECK". For each chunk, the beginning starts with "service {", and ends with "}". I should...

2. Solaris

How do I mount a ZFS snapshot?

I created a zpool and in it there is a zfs volume. I used that to backup data on another server using ISCSI. Now I have the data and want to take a snapshot so that I can view it on another machine that is not in production. Here is what I have done # zfs snapshot mat/vol_1@snap1 # zfs list -t...

3. Solaris

zfs - get the name of the last snapshot

I have installed Solaris 11 Express on my server and want to set up automatic backuping using zfs snapshots. In the backup script I need to find out the name of the last snapshot of the given filesystem (in order to refer to it as the startpoint of an incremental backup). What is the best way to do...

4. Solaris

ZFS snapshot query

I saved one of my zfs snapshot on the remote machine with following command. And now i want to restore the same snapshot to original server how can i receive it on the original server from backup server. #zfs send rpool/ROOT/sol10_patched@preConfig | ssh x.x.x.x zfs receive...

5. Solaris

ZFS snapshot issue.

I 've a weired situation .. my system has zfs root as its file system and now root file system is full at 100% # zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 134G 65.2M 94K /rpool rpool/ROOT ...

6. Solaris

Need to take snapshot in solaris (using ZFS or ....)

Hi, I am working on Network Management Software product. This is supported both windows and solaris platform. I need to take the snapshot of the solaris server ( which installed our product), like vmware in windows. I think using ZFS files system, we can take the snapshot in solaris 10 but...

7. UNIX for Advanced & Expert Users

Need to take snapshot in solaris (using ZFS or ....)

8. UNIX for Advanced & Expert Users

Making things run faster

I am processing some terabytes of information on a computer having 8 processors (each with 4 cores) with a 16GB RAM and 5TB hard drive implemented as a RAID. The processing doesn't seem to be blazingly fast perhaps because of the IO limitation. I am basically running a perl script to read some...

LEARN ABOUT FREEBSD

zfsboot

ZFSBOOT(8)						    BSD System Manager's Manual 						ZFSBOOT(8)

NAME

     zfsboot -- bootcode for ZFS on BIOS-based computers

DESCRIPTION

     zfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool.  zfsboot is installed in two parts on a disk or a partition
     used by a ZFS pool.  The first part, a single-sector starter boot block, is installed at the beginning of the disk or partition.  The second
     part, a main boot block, is installed at a special offset within the disk or partition.  Both areas are reserved by the ZFS on-disk specifi-
     cation for boot use.  If zfsboot is installed in a partition, then that partition should be made bootable using appropriate configuration and
     boot blocks described in boot(8).

BOOTING

     The zfsboot boot process is very similar to that of gptzfsboot(8).  One significant difference is that zfsboot does not currently support the
     GPT partitioning scheme.  Thus only whole disks and MBR partitions, traditionally referred to as slices, are probed for ZFS disk labels.  See
     the BUGS section in gptzfsboot(8) for some limitations of the MBR scheme support.

USAGE

     zfsboot supports all the same prompt and configuration file arguments as gptzfsboot(8).

FILES

     /boot/zfsboot  boot code binary
     /boot.config   parameters for the boot block (optional)
     /boot/config   alternative parameters for the boot block (optional)

EXAMPLES

     zfsboot is typically installed using dd(1).  To install zfsboot on the ada0 drive:

	   dd if=/boot/zfsboot of=/dev/ada0 count=1
	   dd if=/boot/zfsboot of=/dev/ada0 iseek=1 oseek=1024

     If the drive is currently in use, the GEOM safety will prevent writes and must be disabled before running the above commands:

	   sysctl kern.geom.debugflags=0x10

     zfsboot can also be installed in an MBR slice:

	   gpart create -s mbr ada0
	   gpart add -t freebsd ada0
	   gpart create -s BSD ada0s1
	   gpart bootcode -b /boot/boot0 ada0
	   gpart set -a active -i 1 ada0
	   dd if=/boot/zfsboot of=/dev/ada0s1 count=1
	   dd if=/boot/zfsboot of=/dev/ada0s1 iseek=1 oseek=1024

     Note that commands to create and populate a pool are not shown in the example above.

SEE ALSO

     dd(1), boot.config(5), boot(8), gptzfsboot(8), loader(8), zfsloader(8), zpool(8)

HISTORY

     zfsboot appeared in FreeBSD 7.3.

AUTHORS

     This manual page was written by Andriy Gapon <avg@FreeBSD.org>.

BUGS

     Installing zfsboot with dd(1) is a hack.  ZFS needs a command to properly install zfsboot onto a ZFS-controlled disk or partition.

BSD
								September 15, 2014							       BSD

Solaris BigAdmin RSS