OpenSolaris 2008.05 Meet the MacBook Pro

2 More Discussions You Might Find Interesting

1. OS X (Apple)

4 Pole Audio I/O Connections For Macbook Pro...

Disclaimer:- You take this information and use it ENTIRELY at your own risk. I and this site hold no responsibility for any errors either in this text or with your electronics capabilities... The reason I have given this away is/was because I needed an audio input for a simple MacBook Pro...

2. UNIX for Dummies Questions & Answers

force mounting usb drive on macbook pro

alright, this might seem a dumb question, can't say i'm too familiar with these applications. i have a 250mb zip drive that i just got for my macbook pro (i know it's archaic, i have a drum machine that uses 100mb zip disks) and it is recognized in system profiler as a 250mb iomega drive, but it...

LEARN ABOUT DEBIAN

ex

EX(4)							 BSD/i386 Kernel Interfaces Manual						     EX(4)

NAME

     ex -- Ethernet device driver for the Intel EtherExpress Pro/10 and Pro/10+

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device ex

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   if_ex_load="YES"

DESCRIPTION

     The ex driver provides support for Ethernet adapters based on the Intel i82595 chip.

     On the ISA bus, the card will be searched for in the I/O address range 0x200 - 0x3a0.  The IRQ will be read from the EEPROM on the card.  For
     correct operation Plug-N-Play support should be disabled.

     On the PC Card bus, the card will be automatically recognized and configured.

HARDWARE

     The ex driver supports the following Ethernet adapters:

     o	 Intel EtherExpress Pro/10 ISA
     o	 Intel EtherExpress Pro/10+ ISA
     o	 Olicom OC2220 Ethernet PC Card
     o	 Olicom OC2232 Ethernet/Modem PC Card
     o	 Silicom Ethernet LAN PC Card
     o	 Silicom EtherSerial LAN PC Card

DIAGNOSTICS

     ex%d: Intel EtherExpress Pro/10, address %6D, connector %s  The device probe found an installed card, and was able to correctly install the
     device driver.

     ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d  The device probe detected that the board is configured for a different
     interrupt than the one specified in the kernel configuration file.

     ex%d: invalid IRQ.  The device probe detected an invalid IRQ setting.

SEE ALSO

     arp(4), netintro(4), ng_ether(4), ifconfig(8)

HISTORY

     The ex device driver first appeared in FreeBSD 2.2.

AUTHORS

     The ex device driver was written by Javier Martin Rueda.  The PC Card attachment was written by Mitsuru ISAWAKI and Warner Losh.  This manual
     page was written by David E. O'Brien.

BUGS

     Currently the driver does not support multicast.

     The Silicom EtherSerial card's serial port does not currently work.  The Olicom OC2232 PC Card should work with the ex driver, but is cur-
     rently completely broken.

BSD
								   July 16, 2005							       BSD

Solaris BigAdmin RSS