Sun Fire X4540 Server as Backup Server for Zmanda's Amanda Enterprise 2.6 Software

3 More Discussions You Might Find Interesting

1. Solaris

Solaris 10 1/13 & Sun Fire V490 Server

Hi Solaris/Unix Experts, I've installed Oracle Solaris 10 1/13 on a Sun Fire V490 Server via its external Serial Port using a Cisco Console Cable connected to my Laptop PC running SecureCRT terminal emulation software emulating VT100 Terminal. The Sun Fire V490 server has two on-board...

2. Solaris

Help with Solaris 8 10/00 Installation on Sun Fire V490 Server

cat note Hi Sun Solaris Experts, When I try to install Solaris 8 10/00 OS via the Solaris 8 Installation Disk on our Sun Fire V490 Server using the command , I get: boot: cannot open kernel/sparcv9/unix which means it can't find the unix kernel file on the installation disk . By the way, I...

3. Solaris

Sun Fire X4540 in a reboot cycle

So I have a lot of equipment in San Diego racks and there was a recent county-wide black out. Our data racks are supposedly on diesel generators. Most everything made it through the outage just fine without any issue. But for whatever reason, one of our X4540's developed a quirky habit of...

LEARN ABOUT DEBIAN

amcheckdump

AMCHECKDUMP(8)						  System Administration Commands					    AMCHECKDUMP(8)

NAME

       amcheckdump - check the results of an Amanda dump

SYNOPSIS

       amcheckdump [--timestamp|-t timestamp] [--verbose] [-o configoption...] config

DESCRIPTION

       Amcheckdump verifies Amanda dump images by reading them from storage volume(s) and verifying that the images can be parsed by the
       appropriate application (if available). For example, a GNUTAR image is passed to GNU Tar for parsing, and any errors (e.g., corrupt or
       missing data) are noted.

       The application runs on the most recent dump or, if --timestamp is specified, on the most recent dump with that timestamp. Note that the
       verification is local to the Amanda server; if the dump application is not available, or is configured differently on the server than on
       the client, then the verification will most likely fail.

       If a changer is available, it is used to load the required tapes. Otherwise, the application interactively requests the tapes.

       See the "CONFIGURATION OVERRIDE" section in amanda(8) for information on the -o option.

EXAMPLE

       # check the most recent dump
       amcheckdump MYCONFIG

       # check a specific dump from back in '78
       amcheckdump MYCONFIG --timestamp 19780615

SEE ALSO

       amanda(8), amcheck(8)

       The Amanda Wiki: : http://wiki.zmanda.com/

AUTHOR

       Ian Turner <ian@zmanda.com>
	   Zmanda, Inc. (http://www.zmanda.com)

Amanda 3.3.1							    02/21/2012							    AMCHECKDUMP(8)

Solaris BigAdmin RSS