Login or Register to Ask a Question and Join Our Community


Software Releases - RSS News

Network UPS Tools 2.4.0 (Release branch)

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Special Forums News, Links, Events and Announcements Software Releases - RSS News Network UPS Tools 2.4.0 (Release branch)
# 1  
Old 01-28-2009
Network UPS Tools 2.4.0 (Release branch)
ImageNetwork UPS Tools (also known as NUT) is an extremely powerful and versatile client/server based approach to UPS monitoring. Products from a wide range of vendors (APC, Belkin, Best Power, MGE, Tripp-Lite, etc.) are supported. A shared UPS can be monitored by one host, notifcations being sent to the other hosts via authenticated TCP connections. A Web interface is available, as is a Windows client. License: GNU General Public License (GPL)Changes:
This release includes preliminary support forPower Distribution Units (PDUs), either nativelyor through a binding to the Powerman daemon. Italso includes support for several new devices, anda new "repeater" mode for the dummy-ups driver.Support for tcp-wrappers was added to replaceNUT's non-standard ACL system. NUT also includes anew Python-based client library and GUI.Image

Image

More...
Login or Register to Ask a Question

Previous Thread | Next Thread

1 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

System/Network Administration Tools

Sorry for making this post so generic. I'm trying to see if there are tools that exist that look at local network/system configurations and find problems... for example: - NTP server configured that cannot be reached (can cause the system to drift because nobody is alerted to the fact that the... (0 Replies)
Discussion started by: jjinno
0 Replies
Login or Register to Ask a Question

LEARN ABOUT DEBIAN

tripplite

TRIPPLITE(8)							    NUT Manual							      TRIPPLITE(8)

NAME

       tripplite - Driver for Tripp-Lite SmartPro UPS equipment

NOTE

       This man page only documents the hardware-specific features of the tripplite driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE

       This driver should work on the SmartPro line, including the SMART700 and SMART700SER. It only supports SmartPro models that communicate
       using the serial port.

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       offdelay=num
	   Time to wait before the UPS is turned off after the kill power command is sent. The default value is 64 (in seconds).

       rebootdelay=num
	   Set the timer before the UPS is cycled after the reboot command is sent. The default value is 64 (in seconds).

       startdelay=num
	   Set the time that the UPS waits before it turns itself back on after a reboot command. The default value is 60 (in seconds).

KNOWN ISSUES AND BUGS

       Battery charge information may not be correct for all UPSes. It is tuned to be correct for a SMART700SER. Other models may not provide
       correct information. Information from the manufacturer would be helpful.

AUTHORS

       Rickard E. (Rik) Faith, Nicholas Kain

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Other drivers for Tripp-Lite hardware:
       tripplitesu(8), tripplite_usb(8), usbhid-ups(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012							      TRIPPLITE(8)