|
|
Hosts3D: 0.96 Released
01-07-2009
|
|
ip6_setup(8) System Manager's Manual ip6_setup(8) NAME
ip6_setup - IPv6 configuration program SYNOPSIS
/usr/sbin/ip6_setup DESCRIPTION
The ip6_setup utility allows you to configure the IPv6 networking software on your system. To run ip6_setup, enter the following command and then answer the questions: # ip6_setup You must know your Internet Protocol Version 6 (IPv6) address. If your network uses subnet routing, you must know the subnet mask for your network. The network manager should be able to provide you with the information that you need. After the ip6_setup command completes, the network services on the system can be restarted manually with the following command: # /usr/sbin/rcinet restart Before you restart the network services with the preceding command, warn the users that the network services on the system are being removed. File systems that were not mounted using the /etc/fstab file or the automount command must be unmounted with the unmount command. You must remount these file systems using the mount command after the network is started on your system. Alternatively, you can reboot the system with the following command: # /usr/sbin/shutdown -r now FILES
Specifies the host name file. Specifies the environment variables that define the network configuration on your system. Specifies the trusted hosts file. Specifies the network name file. Specifies Internet routing information. Specifies Internet routing information. SEE ALSO
Commands: mount(8), rcinet(8) Files: gateways(4), hosts(4), hosts.equiv(4), networks(4), routes(4). Network Administration ip6_setup(8)