Mirror DSL is a simple DSL layer to make JavaReflection easier.License: The Apache License 2.0Changes:
The main change to this release of Mirror wasadding ReflectionProviders, a set of interfaces toallow the user to use her own reflection code.Besides that, the documentation was translated toBrazilian Portuguese, Javadoc was added, and somebugs were fixed (like not running under Java 5).
I have a dual boot computer with Windows 7 Pro 64 on one drive and SCO OpenServer 5.0.7 on another drive. The DSL modem works perfectly on the Windows side; I can input the gateway and DNS address 192.168.1.1 in Windows network configuration.
On the UNIX side, I created the /etc/resolv.conf... (8 Replies)
Hi ,
I am new to SVM .when i try to learn RAID 1 , first they are creating two RAID 0 strips through
metainit d51 1 1 c0t0d0s2
metainit d52 1 1 c1t0d0s2
In the next step
metainit d50 -m d51
d50: Mirror is setup
next step is
metaattach d50 d52
d50 : submirror d52 is... (7 Replies)
I'm trying to instal dsl to hd ,but cfdisk comand returns an error.
dmesg | grep hda returns :
Optarac DVD RW AD-7530B, ATAPI CD/DVD-rom drive
attached ide-scsi driver
So i figure that is the problem.Right?
What should i do? (1 Reply)
I've looked a little but haven't found a solid answer, assuming there is one.
What's better, hardware mirroring or ZFS mirroring? Common practice for us was to use the raid controllers on the Sun x86 servers. Now we've been using ZFS mirroring since U6. Any performance difference? Any other... (3 Replies)
ive been playing around in dsl (damn small linux) live for some time and i love the simplicity of it. but when i go into cfdisk to partition my hard drive, it says like
"Fatal Error:Does not have permission"
i am trying out Xandros desktop os 2.0 right now on my laptop. Can some one help me... (4 Replies)
i have 5 computers on a network behind a firewall, once in a while my DSL service will get knocked out and will come back in like 20 minutes or so, but during those 20 minutes, i will be able to view my website, but i will not be able to retrieve my mail, nor will be able to ftp or telnet into my... (12 Replies)
PPPOE-SNIFF(8) System Manager's Manual PPPOE-SNIFF(8)NAME
pppoe-sniff - examine network for non-standard PPPoE frames
SYNOPSIS
pppoe-sniff [options]
DESCRIPTION
pppoe-sniff listens for likely-looking PPPoE PADR and session frames and deduces extra options required for pppoe(8) to work.
Some DSL providers seem to use non-standard frame types for PPPoE frames, and/or require a certain value in the Service-Name field. It is
often easier to sniff those values from a machine which can successfully connect rather than try to pry them out of the DSL provider.
To use pppoe-sniff, you need two computers, a DSL modem and an Ethernet hub (not an Ethernet switch.)
If the DSL modem normally connects directly to your computer's Ethernet card, connect it to the "uplink" port on the Ethernet hub. Plug
two computers into normal ports on the hub. On one computer, run whatever software the DSL provider gave you on whatever operating system
the DSL provider supports. On the other computer, run Linux and log in as root.
On the Linux machine, put the Ethernet interface into promiscuous mode and start pppoe-sniff. If the ethernet interface is eth0, for exam-
ple, type these commands:
ifconfig eth0 promisc
pppoe-sniff -I eth0
On the other machine, start your DSL connection as usual. After a short time, pppoe-sniff should print recommendations for the value of
PPPOE_EXTRA. Set this value in /etc/ppp/pppoe.conf. If pppoe-sniff indicates that something special is required in PPPOE_EXTRA, please e-
mail this to pppoe@roaringpenguin.com along with the name of your ISP and the manufacturer and model number of your DSL modem. This infor-
mation will be collated and provided on the PPPoE web page for users who do not have two computers.
After pppoe-sniff finishes (or you stop it if it seems hung), remember to turn off promiscuous mode:
ifconfig eth0 -promisc
OPTIONS -I interface
The -I option specifies the Ethernet interface to use. Under Linux, it is typically eth0 or eth1. The interface should be "up" and
in promiscuous mode before you start pppoe-sniff.
-V The -V option causes pppoe-sniff to print its version number and exit.
BUGS
pppoe-sniff only works on Linux.
AUTHORS
pppoe-sniff was written by David F. Skoll <dfs@roaringpenguin.com>.
The pppoe home page is http://www.roaringpenguin.com/pppoe/.
SEE ALSO adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), pppoe(8), adsl-setup(8), adsl-status(8), pppoe-server(8), pppoe-
relay(8)4th Berkeley Distribution 3 July 2000 PPPOE-SNIFF(8)