m2vmp2cut is frame accurate (currently PAL) MPEG2 video (M2V file) with accompanied MP2 audio cutter. Frame accuracy is achieved by re-encoding video around cutpoints. Audio is cut from a separate MP2 file at positions that keep A/V sync as good as possible (maximum sync difference is around 10-15 milliseconds compared to the source). License: GNU General Public License (GPL) Changes:
This release adds a GUI client for cutpoint selection. It adds m2vtoyuv for frame decoding in place of transcode(1). Now GOPs are closed just after encoded frames. A CLI frontend has been added to run demuxer, cutter, and m2vmp2cut.pl. There are many other small changes.
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
ESMERGE(1) User Commands ESMERGE(1)NAME
esmerge - merge audio and video ES into a TS
DESCRIPTION
Usage:
esmerge [switches] <video-file> <audio-file> <output-file>
TS tools version 1.11, esmerge built Nov 11 2008 17:15:46
Merge the contents of two Elementary Stream (ES) files, one containing video data, and the other audio, to produce an output file
containing Transport Stream (TS).
Files:
<video-file>
is the ES file containing video.
<audio-file>
is the ES file containing audio.
<output-file> is the resultant TS file.
Switches:
-quiet, -q
Only output error messages.
-verbose, -v
Output information about each audio/video frame.
-x Output diagnostic information.
-h264 The video stream is H.264 (the default)
-avs The video stream is AVS
-vidrate <hz>
Video frame rate in Hz - defaults to 25Hz.
-rate <hz>
Audio sample rate in Hertz - defaults to 44100, i.e., 44.1KHz.
-cd Equivalent to -rate 44100 (CD rate), the default.
-dat Equivalent to -rate 48000 (DAT rate).
-adts The audio stream is ADTS (the default)
-l2 The audio stream is MPEG layer 2 audio
-mp2adts
The audio stream is MPEG-2 style ADTS regardless of ID bit
-mp4adts
The audio stream is MPEG-4 style ADTS regardless of ID bit
-ac3 The audio stream is Dolby AC-3 in ATSC
-patpmtfreq <f>
PAT and PMT will be inserted every <f> video frames. by default, f = 0 and PAT/PMT are inserted only at the start of the output
stream.
Limitations =========== For the moment, the video input must be H.264 or AVS, and the audio input ADTS, AC-3 ATSC or MPEG layer 2. Also,
the audio is assumed to have a constant number of samples per frame.
esmerge <video-file> <audio-file> <output-file>
TS tools version 1.11, esmerge built Nov 11 2008 17:15:46
Merge the contents of two Elementary Stream (ES) files, one containing video data, and the other audio, to produce an output file
containing Transport Stream (TS).
Files:
<video-file>
is the ES file containing video.
<audio-file>
is the ES file containing audio.
<output-file> is the resultant TS file.
Switches:
-quiet, -q
Only output error messages.
-verbose, -v
Output information about each audio/video frame.
-x Output diagnostic information.
-h264 The video stream is H.264 (the default)
-avs The video stream is AVS
-vidrate <hz>
Video frame rate in Hz - defaults to 25Hz.
-rate <hz>
Audio sample rate in Hertz - defaults to 44100, i.e., 44.1KHz.
-cd Equivalent to -rate 44100 (CD rate), the default.
-dat Equivalent to -rate 48000 (DAT rate).
-adts The audio stream is ADTS (the default)
-l2 The audio stream is MPEG layer 2 audio
-mp2adts
The audio stream is MPEG-2 style ADTS regardless of ID bit
-mp4adts
The audio stream is MPEG-4 style ADTS regardless of ID bit
-ac3 The audio stream is Dolby AC-3 in ATSC
-patpmtfreq <f>
PAT and PMT will be inserted every <f> video frames. by default, f = 0 and PAT/PMT are inserted only at the start of the output
stream.
Limitations =========== For the moment, the video input must be H.264 or AVS, and the audio input ADTS, AC-3 ATSC or MPEG layer 2. Also,
the audio is assumed to have a constant number of samples per frame.
SEE ALSO
The full documentation for esmerge is maintained as a Texinfo manual. If the info and esmerge programs are properly installed at your
site, the command
info esmerge
should give you access to the complete manual.
esmerge 1.11 November 2008 ESMERGE(1)