by mistake I ran unmirror while mirroring was running in the back ground. anyhow the unmirror operation failed with the following
still the mirroring is in process now.
would it have effected the VG in anyway?
Last edited by Yogesh Sawant; 04-14-2011 at 08:04 AM..
Reason: added code tags
Hello Team,
In one of our machine which running in AIX 6.1 we doing the root mirroring. Currently the OS booted from the local disk and we have mirrored that in to the SAN disk. All went well and both are synced but when we making it as a multiboot its throwing the below error. Kindly... (4 Replies)
Hello,
I just build a Solaris 10 server on an x86 box. I forgot to mirror the two disks when I install the OS. Can I get some help with this?
I have this
# zpool list
rpool 278G 5.77G 272G 2% ONLINE -
# zpool status
pool: online
state: ONLINE
scan: none requested
config:
... (12 Replies)
Hello colleagues!
One day I found that a LV was not mirrored properly.
Some manipulations were realized so the mirroring became well.
Please look jpg attached, may be it would be useful for somebody. (4 Replies)
Hi All
i wish to mirror the root disk, but i face the below error.
root@saturn # metainit d11 1 1 c0t0d0s0
metainit: saturn: c0t0d0s0: is mounted on /
kindly assist... (27 Replies)
I'm researching on how to unmirror a set of mirrored drives as this should enable me to do a failsafe patch install. My current install has 2 disk with all LVs mirrored except the sysdump LV.
This is the bit that confuses me as some seem to advise removing the sysdump from both drives (Patch... (2 Replies)
I'm looking for a way to mirror one user to another.
For example:
If I have the user ABC and I want to mirror his:
-Primary group
-Any other groups ABC belongs to
-UID
-Home directory
And create an exact copy over to another server to a user called XYZ. I already have SSH keys set... (1 Reply)
Hi
I have a Sunfire X4100 box with a 4 disk Chassis (although I only have 2 disks in it). I have been asked to add two more disks into the chassis so that I can mirror the original two using SVM .....Ive read through a couple of SVM docs but am finding it a little confusing, and if any of you... (1 Reply)
volmirror(8) System Manager's Manual volmirror(8)NAME
volmirror - Mirrors volumes on a disk or control default mirroring
SYNOPSIS
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] medianame [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no] -a [new_medianame...]
/usr/sbin/volmirror [-g diskgroup] [-d yes|no]
/usr/sbin/volmirror [-g diskgroup] -D
OPTIONS
The volmirror command supports the following options: Limits operation of the command to the given disk group, as specified by disk group
ID or disk group name. The medianame operands will be evaluated relative to the given disk group. If no disk group is supplied to the
volmirror command, rootdg is presumed. Changes the default for subsequent volume creation, depending on the option argument. If the option
argument is yes, all subsequent volumes created using the volassist command will automatically be created as mirrored volumes. If the
option argument supplied is no, mirroring will be turned off for future volumes by default. Displays current default status for mirroring.
Mirrors all existing volumes for the specified disk group.
DESCRIPTION
The volmirror command provides a mechanism to mirror all the contents of a specified disk, to mirror all currently unmirrored volumes in
the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a single plex (mirror
copy), will be mirrored by adding an additional plex.
Volumes containing subdisks that reside on more than one disk will not be mirrored by volmirror.
The volmirror command is generally called from the voldiskadm menus. It is not an interactive command and once called, will continue until
completion of the operation or until a failure is detected.
Note
Due to the nature of generating mirror copies of volumes, this command may take a considerable time to complete.
In the first listed form of the command, the disk media name is supplied on the command line to volmirror. That name is taken to be the
only disk from which volumes should be mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes
are mirrored.
In the first and second listed forms of the command, the new_medianame ... parameter identifies a new disk media name (or set of names).
The mirroring operation being performed will use these names as targets on which to allocate the mirrors. An error will result if the same
disk is specified for both the source and target disk and if no other viable targets are supplied.
EXAMPLES
The following are examples of the use of the volmirror command. The following command mirrors the contents of the disk named disk01 to any
available space on any available disk. Subsequent calls to volassist will cause created volumes to be mirrored by default. volmirror -d
yes disk01 The following command displays the current status of default mirroring. It prints the string yes if mirroring is currently
enabled or no, if not. volmirror -D The following command mirrors any volumes on disk02 onto disk03. volmirror disk02 disk03
FILES
The defaults file for volassist parameters.
SEE ALSO volintro(8), volassist(8), volrootmir(8)volmirror(8)