io utilization (average) on AIX

10 More Discussions You Might Find Interesting

1. AIX

Need help on memory utilization.

I have run the utility nmon in aix 6.1, and found memory utilization is 99.9% in physical. and pressed h key and then t , in that it is not showing single process which is consuming memory resources. please help me how to find out actual memory utilization. wheather 99% is real memory...

2. Red Hat

CPU Utilization and Memory Utilization of Services and Applications

Hi, i am new to linux/RHEL 6.0 and i have two questions. 1) How to get the CPU utilization and Memory Utilization of all Services running currently? 2) How to get the CPU utilization and Memory Utilization of all Applications running currently? Please help me to find the script. ...

3. AIX

What happened if CPU utilization is near to 100 % in AIX 6.1?

Hi all, We have a setup where our application is running on 2 AIX servers ( AIX 6.1 , 16 CPU, P5 570 boxes). These boxes works as disaster recovery server for each other i.e. in case of 1 box failure, whole load will run out of other box. Average CPU utilization on each box is between 30-40 %...

4. Shell Programming and Scripting

Cpu utilization by a process has to be mailed if more than 5% on AIX

i am using the below command in order to find the cpu utilization by a user..now i want to mail if the cpu utilization goes beyond 5%....can someone please help me ? ps auxw | sort -r +2 | awk '{ print $3,$1 }' | head -6 | egrep "USER|#anonymous#" %CPU USER 2.0 anonymous Regards,...

5. AIX

Regarding AIX Memory Utilization usage calculation

Hello, Am working on small program that used to calculate the memory usage of AIX servers. Am using svmon -G command to get the memory usage. For example, consider the following output. $ svmon -G size inuse free pin virtual mmode memory ...

6. AIX

How to calculate AIX CPU utilization using lparstat command

Could you please explain about calculate CPU utilization of aix server using lparstat command? Here below i have provided example output from aix test server. System configuration: type=Shared mode=Uncapped smt=On lcpu=4 mem=4096 psize=63 ent=0.50 %user %sys %wait %idle physc %entc ...

7. Red Hat

FS Utilization Issue

Hi, I have inherited a server that is experiencing a FS utilization issue. The /home (below) is being utilized by the other mounted FS even though they belong to 2 different vg's. /dev/mapper/VolGroup00-home_vol 3.9G 3.7G 0 100% /home /dev/mapper/vg01-lvol0 394G 306G 68G 82%...

8. AIX

Find Memory Utilization in AIX Server

How to find the memory utilization of AIX server using svmon -G output. Sample output for svmon -G command from my AIX test server, size inuse free pin virtual memory 4014080 3995443 18637 575916 1876393 pg space 1179648 ...

9. AIX

AIX 6.1 Power6 - Sys CPU utilization twice that of User

Hello, We just purchased two new 4-way (one active one failover) 5Ghz Power6 Servers (failover) with 64GB RAM (32GB per node) runing AIX 6.1 with two LPARs per node connected to our SAN with two 4GB HBAs. The PROD LPAR has 2 dedicated CPUs (4 virtual) and the TEST LPAR has 2 dedicated CPUs. ...

10. Solaris

Low average cpu utilization.

Hi to all, i have an app on solaris 5.8 writed in C++ (3.2.1) that use multi threading. Hardware has 8 cpu. When i run my app i note that the average of cpu go at least at 40%, and the performance are not so higher.. There is a cpu limitation on solaris, that dedicate only a part of cpu...

LEARN ABOUT HPUX

ruptime

ruptime(1)						      General Commands Manual							ruptime(1)

NAME

       ruptime - show status of local machines

SYNOPSIS

DESCRIPTION

       outputs	a  status  line  for each machine on the local network that is running the daemon.  status lines are formed from packets broadcast
       once every 3 minutes between daemons (see rwhod(1M)) on each host on the network.  Each status line  has  a  field  for	the  name  of  the
       machine, the status of the machine (up or down), how long the machine has been up or down, the number of users logged into the machine, and
       the 1-, 5- and 15-minute load averages for the machine when the packet was sent.

       The status of the machine is reported as ``up'' unless no report has been received from the machine for 11 minutes or more.

       The length of time that the machine has been up is shown as:

       Load averages are the average number of jobs in the run queue over the last 1-, 5- and 15-minute intervals when the packet was sent.

       An example status line output by might be:

       The above status line would be interpreted as follows:

       is presently ``up'' and has been up for 1 day, 5 hours and 15 minutes.  It currently has 7 users logged in.  Over the last 1-minute  inter-
       val,  an average of 1.47 jobs were in the run queue.  Over the last 5-minute interval, an average of 1.16 jobs were in the run queue.  Over
       the last 15-minute interval, an average of 0.80 jobs were in the run queue.

       If a user has not used the system for an hour or more, the user is considered idle.  Idle users are not shown unless the option	is  speci-
       fied.

   Options
       If no options are specified, the listing is sorted by host name.  Options change sorting order as follows:

	      Sort by load average.

	      Sort by up time.

	      Sort by the number of users.

	      Reverse the sort order.

DIAGNOSTICS

       No status report files in
	    Ask the system administrator to check whether the daemon is running.

AUTHOR

       was developed by the University of California, Berkeley.

FILES

       Data files

SEE ALSO

       rwho(1), rwhod(1M).

																	ruptime(1)

Shell Programming and Scripting