zone transfer - free site

10 More Discussions You Might Find Interesting

1. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ...

2. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that...

3. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1"

4. Solaris

DNS zone transfer Problem.

Hi All , I have 2 DNS servers (BIND 9.6.1 -Solaris 10) .Its configured as master ,slave serves .Now i am recieving error messages related to zone transfer in both the servers as mentioned below . Primar Server named: client x.x.x.x#40825: transfer of './IN': sending zone data: ran...

5. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I...

6. Solaris

Memory usage, free and used, using sar, top and vmstat in Solaris zone/container

Hi all, I have a server running an Oracle database that is part of a Solaris M5000 container. Presumably this is referred to as a zone within a cluster, not sure if I get the terminology right. Anyway, a third-party manages the zone and unfortunately is not "helpful/friendly" to assist me on...

7. Solaris

How to obtain DNS Zone transfer settings on Sun OS 5.7

I have an old Sun SparcStation 5 that is running Sun OS 5.7, I'm not sure which commands would allow me to obtain the DNS zone transfer settings? 1.) I'm needing to know if the zone transfers are enabled. 2.) If it is enabled, does it transfer to specific servers 3.) If so, how do I go about...

8. Solaris

Bind zone transfer recategorises zone file?

Hi, I have a primary/slave Bind 9 setup running on a Solaris 10 platform. Everything is hunky dorey, except for when I make a zone file change and up the serial the file that is transferred to the slave looses all its comments, and the entries are place in alphabetical order. I administer many...

9. Windows & DOS: Issues & Discussions

I need a free firewall besides zone alarm for XP PRO

Please help. Reply and tell me if you find one. Lots of thanks! Computek

10. IP Networking

bind zone transfer?

Hi all, How to deny any zone transfer out of my host??? bind 8.2.3 Thank you all, Regards :D

LEARN ABOUT FREEBSD

nsd-xfer

nsd-xfer(8)							    nsd 3.2.12							       nsd-xfer(8)

NAME

       nsd-xfer - AXFR client to transfer zones from a name server

SYNOPSIS

       nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers

DESCRIPTION

       Nsd-xfer is program to transfer zones from a name server using AXFR.  NSD is a complete implementation of an authoritative DNS nameserver.

OPTIONS

       -4     Only send to IPv4 addresses.

       -6     Only send to IPv6 addresses.

       -a address[@port]
	      Specify the source address (and port) to send from.

       -f file
	      The file to store the zone in.

       -p port
	      Specify the port to send to.

       -s serial
	      Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.

       -T tsiginfo
	      Use  TSIG  to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
	      reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).

       -v     Be more verbose.

       -z zone
	      Specify the zone to receive.

       servers
	      List of nameservers to try.

EXAMPLES

       To run this program the standard way type:

       # nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4

SEE ALSO

       nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)

AUTHORS

       NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.

NLnet Labs							   jul 19, 2012 						       nsd-xfer(8)

Shell Programming and Scripting