zone transfer - free site

10 More Discussions You Might Find Interesting

1. IP Networking

IPSec Openswan Site to Site VPN - Big Pain

Hi @all, I try to connect 2 LANs with IPSec/Openswan LAN 1: 192.168.0.0/24 LAN 2: 192.168.1.0/24 This is my Config: conn HomeVPN # # Left security gateway, subnet behind it, nexthop toward right. left=192.168.1.29 ...

2. IP Networking

Does cisco 1921 router support site to site VPNs using IPSec?

Q: "Does Cisco 1921 router support,, act as an endpoint for, site to site VPNs using IPSec? If so, how many? " A: If you get the Cisco 1921/k9 with the security services bundle then it will have built in security features. Cisco, typically includes IP Sec tunnels I believe as part of that...

3. IP Networking

How to establish site to site vpn - Linux machine and cisco asa?

Hi, I am trying to establish vpn between my linux server and cisco asa at client side. I installed openswan on my cent os. Linux Server eth0 - 182.2.29.10 Gateway - 182.2.29.1 eth1 - 192.9.200.75 I have simple IPtables Like WAN="eth0" LAN="eth1"

4. Solaris

DNS zone transfer Problem.

Hi All , I have 2 DNS servers (BIND 9.6.1 -Solaris 10) .Its configured as master ,slave serves .Now i am recieving error messages related to zone transfer in both the servers as mentioned below . Primar Server named: client x.x.x.x#40825: transfer of './IN': sending zone data: ran...

5. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I...

6. Solaris

Memory usage, free and used, using sar, top and vmstat in Solaris zone/container

Hi all, I have a server running an Oracle database that is part of a Solaris M5000 container. Presumably this is referred to as a zone within a cluster, not sure if I get the terminology right. Anyway, a third-party manages the zone and unfortunately is not "helpful/friendly" to assist me on...

7. Solaris

How to obtain DNS Zone transfer settings on Sun OS 5.7

I have an old Sun SparcStation 5 that is running Sun OS 5.7, I'm not sure which commands would allow me to obtain the DNS zone transfer settings? 1.) I'm needing to know if the zone transfers are enabled. 2.) If it is enabled, does it transfer to specific servers 3.) If so, how do I go about...

8. Solaris

Bind zone transfer recategorises zone file?

Hi, I have a primary/slave Bind 9 setup running on a Solaris 10 platform. Everything is hunky dorey, except for when I make a zone file change and up the serial the file that is transferred to the slave looses all its comments, and the entries are place in alphabetical order. I administer many...

9. Windows & DOS: Issues & Discussions

I need a free firewall besides zone alarm for XP PRO

Please help. Reply and tell me if you find one. Lots of thanks! Computek

10. IP Networking

bind zone transfer?

Hi all, How to deny any zone transfer out of my host??? bind 8.2.3 Thank you all, Regards :D

LEARN ABOUT CENTOS

ldns-notify

ldns-notify(1)						      General Commands Manual						    ldns-notify(1)

NAME

       ldns-notify - notify DNS servers that updates are available

SYNOPSIS

       ldns-notify [options] -z zone servers

DESCRIPTION

       ldns-notify  sends a NOTIFY message to DNS servers. This tells them that an updated zone is available at the master servers. It can perform
       TSIG signatures and it can add a SOA serial number of the updated zone.	If a server already has that serial number it will  disregard  the
       message.

OPTIONS

       -z zone
	      The zone that is updated.

       -h     Show usage and exit

       -v     Show the version and exit

       -s serial
	      Append a SOA record indicating the serial number of the updated zone.

       -p port
	      Use port as destination port (default the DNS port 53) for the UDP packets.

       -y key:data
	      Use the given TSIG key and base64-data to sign the NOTIFY. Uses the hmac-md5 algorithm.

       -d     Print verbose debug information. The query that is sent and the query that is received.

       -r num Specify the maximum number of retries before notify gives up trying to send the UDP packet.

EXIT CODE

       The program exits with a 0 exit code if all servers replied an acknowledgement to the notify message, and a failure exit code otherwise.

AUTHOR

       Written by the ldns team as an example for ldns usage.

REPORTING BUGS

       Report bugs to <ldns-team@nlnetlabs.nl>.

COPYRIGHT

       Copyright  (C)  2005 NLnet Labs. This is free software. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

								    9 Jan 2007							    ldns-notify(1)

Shell Programming and Scripting